Date: Mon, 05 Feb 2001 22:45:29 +0000 From: Brian Somers <brian@Awfulhak.org> To: "Hal Weaver" <hweaver@pinetel.com> Cc: mobile@FreeBSD.org, brian@Awfulhak.org Subject: Re: PPP problem: PCMCIA modem on ThinkPad Message-ID: <200102052245.f15MjTQ06134@hak.lan.Awfulhak.org> In-Reply-To: Message from "Hal Weaver" <hweaver@pinetel.com> of "Mon, 05 Feb 2001 09:48:12 PST." <005301c08f9b$ea0b8420$322ae38f@thinkpad>
next in thread | previous in thread | raw e-mail | index | archive | help
I don't see your modem conversation in the log. If you didn't
do the AT bit after running ``term'' (you must have right ? Otherwise
you'd have a ``set dial'' somewhere in the log ?), then that'd be the
problem - when you drop into terminal mode, you're expected to do the
dial & login bits.
Does your card respond to AT after you type ``term'' ? If so, ppp's
talking to the device ok.
> I'm using a rather new PCMCIA modem on a Thinkpad 760ED. PPP doesn't work
> with the /etc/pccard.conf I'm using, but tip works ok -- I can login to my
> IP with it..
>
> /var/log/ppp.log says something about "/dev/cuaa4 doesn't support CD "
>
> Below are some relevant portions from /var/log/ppp.log, pccardc, and
> /etc/pccard.conf.
>
> TIA
>
> Hal
>
> ================
> from /var/log/ppp.log
> ================
> .
> .
> .
> Jan 26 15:52:08 pdx ppp[207]: Phase: Using interface: tun0
> Jan 26 15:52:08 pdx ppp[207]: Phase: deflink: Created in closed state
> Jan 26 15:52:08 pdx ppp[207]: tun0: Command: default: set device /dev/cuaa4
> Jan 26 15:52:08 pdx ppp[207]: tun0: Command: default: set speed 115200
> Jan 26 15:52:08 pdx ppp[207]: tun0: Phase: PPP Started (interactive mode).
> Jan 26 15:52:15 pdx ppp[207]: tun0: Command: /dev/tty: t
> Jan 26 15:52:15 pdx ppp[207]: tun0: Phase: bundle: Establish
> Jan 26 15:52:15 pdx ppp[207]: tun0: Phase: deflink: closed -> opening
> Jan 26 15:52:17 pdx ppp[207]: tun0: Phase: deflink: Connected!
> Jan 26 15:52:17 pdx ppp[207]: tun0: Phase: deflink: opening -> carrier
> Jan 26 15:52:18 pdx ppp[207]: tun0: Phase: deflink: /dev/cuaa4 doesn't
> support CD
> Jan 26 15:52:18 pdx ppp[207]: tun0: Phase: deflink: carrier -> ready
> Jan 26 15:55:11 pdx ppp[207]: tun0: Command: /dev/tty: dial
> PAPorCHAPpmdemand
> Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set phone
> 8936990
> Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set login
> Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set authname
> hweaverP
> Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set authkey
> ********
> Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set timeout
> 120
> Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set ifaddr
> 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
> Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: add default
> HISADDR
> Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: enable dns
> Jan 26 15:55:11 pdx ppp[207]: tun0: Phase: deflink: ready -> carrier
> Jan 26 15:55:11 pdx ppp[207]: tun0: Phase: deflink: carrier -> lcp
> Jan 26 15:55:11 pdx ppp[207]: tun0: LCP: FSM: Using "deflink" as a transport
> Jan 26 15:55:11 pdx ppp[207]: tun0: LCP: deflink: State change Initial -->
> Closed
> Jan 26 15:55:11 pdx ppp[207]: tun0: LCP: deflink: State change Closed -->
> Stopped
> .
> .
> .
[.....]
--
Brian <brian@Awfulhak.org> <brian@[uk.]FreeBSD.org>
<http://www.Awfulhak.org>; <brian@[uk.]OpenBSD.org>
Don't _EVER_ lose your sense of humour !
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200102052245.f15MjTQ06134>