Date: Wed, 05 Jul 2006 17:47:50 +0300 From: Yousef Raffah <yraffah@savola.com> To: freebsd-mobile@freebsd.org Subject: Re: Interrupt Storms on irq:11 with Tecra A4 Message-ID: <1152110870.677.23.camel@redevil.savola.com> In-Reply-To: <1152028572.704.4.camel@redevil.savola.com> References: <1152019643.704.42.camel@redevil.savola.com> <1152028572.704.4.camel@redevil.savola.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-XNzvQEkFqzvoYHBkZ7Z6 Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Tue, 2006-07-04 at 18:56 +0300, Yousef Raffah wrote: > On Tue, 2006-07-04 at 16:27 +0300, Yousef Raffah wrote: > > I just updated my BIOS yesterday in order to test if my laptop will > > "ever" work with ACPI under FreeBSD. > >=20 > > The test resulted in having interrupt storm on irq:11 whenever acpi is > > enabled during the boot process. I have tried to disable apic from my > > kernel but that didn't help, same results. > > I know interrupt storms can be "ok" to ignore but I guess that is not a= n > > option in my case as it is disabling my hard drive! > >=20 > > Googling for interrupt storm gave me results of people having the same > > problem but I still can't find how to overcome this. Not sure if I can > > get a dmesg output with the interrupt storm, any ideas? > >=20 Sorry for bothering everyone on the list with my problem but I really need to get over this interrupt storm thing. Can someone at least tell me what am I supposed to do (without flaming please :) ) in order to overcome this? > I just thought these information might be very helpful: >=20 > vmstat -i > interrupt total rate > irq0: clk 85625 984 > irq1: atkbd0 244 2 > irq3: sio1 1 0 > irq4: sio0 1 0 > irq7: ppc0 2 0 > irq8: rtc 10960 125 > irq11: cbb0 myk0+* 237 2 > irq14: ata0 2373 27 > irq15: ata1 127 1 > Total 99570 1144 >=20 >=20 > Here is my pciconf -lv: >=20 > hostb0@pci0:0:0: class=3D0x060000 card=3D0xff101179 chip=3D0x25908= 086 > rev=3D0x03 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82915PM/GM/GMS, 82910GML Host Bridge' > class =3D bridge > subclass =3D HOST-PCI > pcib1@pci0:1:0: class=3D0x060400 card=3D0x00000088 chip=3D0x25918086 rev= =3D0x03 > hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D '82915PM/GM PCI Express Graphics Port' > class =3D bridge > subclass =3D PCI-PCI > pcib2@pci0:28:0: class=3D0x060400 card=3D0x00000040 chip=3D0x26608= 086 > rev=3D0x04 hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D '82801FB/FR/FW/FRW PCI Express Port 1' > class =3D bridge > subclass =3D PCI-PCI > pcib3@pci0:28:1: class=3D0x060400 card=3D0x00000040 chip=3D0x26628= 086 > rev=3D0x04 hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D '82801FB/FR/FW/FRW PCI Express Port 2' > class =3D bridge > subclass =3D PCI-PCI > uhci0@pci0:29:0: class=3D0x0c0300 card=3D0xff101179 chip=3D0x26588= 086 > rev=3D0x04 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801FB/FR/FW/FRW USB UHCI Controller' > class =3D serial bus > subclass =3D USB > uhci1@pci0:29:1: class=3D0x0c0300 card=3D0xff101179 chip=3D0x26598= 086 > rev=3D0x04 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801FB/FR/FW/FRW USB UHCI Controller' > class =3D serial bus > subclass =3D USB > uhci2@pci0:29:2: class=3D0x0c0300 card=3D0xff101179 chip=3D0x265a8= 086 > rev=3D0x04 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801FB/FR/FW/FRW USB UHCI Controller' > class =3D serial bus > subclass =3D USB > uhci3@pci0:29:3: class=3D0x0c0300 card=3D0xff101179 chip=3D0x265b8= 086 > rev=3D0x04 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801FB/FR/FW/FRW USB UHCI Controller' > class =3D serial bus > subclass =3D USB > ehci0@pci0:29:7: class=3D0x0c0320 card=3D0xff101179 chip=3D0x265c8= 086 > rev=3D0x04 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801FB/FR/FW/FRW USB 2.0 EHCI Controller' > class =3D serial bus > subclass =3D USB > pcib4@pci0:30:0: class=3D0x060401 card=3D0x00000050 chip=3D0x24488= 086 > rev=3D0xd4 hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI > Bridge' > class =3D bridge > subclass =3D PCI-PCI > pcm0@pci0:30:2: class=3D0x040100 card=3D0xff101179 chip=3D0x266e8086 rev= =3D0x04 > hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801FB/FR/FW/FRW AC '97 Audio Controller' > class =3D multimedia > subclass =3D audio > none0@pci0:30:3: class=3D0x070300 card=3D0x00011179 chip=3D0x266d8= 086 > rev=3D0x04 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801FB/FR/FW/FRW AC '97 Modem Controller' > class =3D simple comms > subclass =3D generic modem > isab0@pci0:31:0: class=3D0x060100 card=3D0xff101179 chip=3D0x26418= 086 > rev=3D0x04 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801FBM ICH6M LPC Interface Bridge' > class =3D bridge > subclass =3D PCI-IS > atapci0@pci0:31:2: class=3D0x010180 card=3D0xff101179 chip=3D0x26538= 086 > rev=3D0x04 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801FBM ICH6M SATA Controller' > class =3D mass storage > subclass =3D ATA > none1@pci1:0:0: class=3D0x030000 card=3D0xff101179 chip=3D0x54601002 rev= =3D0x00 > hdr=3D0x00 > vendor =3D 'ATI Technologies Inc' > device =3D 'Mobility Radeon X300' > class =3D display > subclass =3D VGA > myk0@pci2:0:0: class=3D0x020000 card=3D0xff101179 chip=3D0x436211ab rev= =3D0x15 > hdr=3D0x00 > vendor =3D 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device =3D '88E8053 Yukon PCI-E Gigabit Ethernet Controller > (copper)' > class =3D network > subclass =3D ethernet > iwi0@pci6:4:0: class=3D0x028000 card=3D0x27418086 chip=3D0x42208086 rev= =3D0x05 > hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D 'PRO/Wireless 2200BG Network Connection' > class =3D network > cbb0@pci6:6:0: class=3D0x060700 card=3D0xff101179 chip=3D0x8031104c rev= =3D0x00 > hdr=3D0x02 > vendor =3D 'Texas Instruments (TI)' > class =3D bridge > subclass =3D PCI-CardBus > fwohci0@pci6:6:2: class=3D0x0c0010 card=3D0xff101179 chip=3D0x80321= 04c > rev=3D0x00 hdr=3D0x00 > vendor =3D 'Texas Instruments (TI)' > class =3D serial bus > subclass =3D FireWire > none2@pci6:6:3: class=3D0x018000 card=3D0xff101179 chip=3D0x8033104c rev= =3D0x00 > hdr=3D0x00 > vendor =3D 'Texas Instruments (TI)' > device =3D 'PCIxx21 Integrated FlashMedia Controller' > class =3D mass storage > none3@pci6:6:4: class=3D0x080500 card=3D0xff101179 chip=3D0x8034104c rev= =3D0x00 > hdr=3D0x00 > vendor =3D 'Texas Instruments (TI)' > class =3D base peripheral >=20 >=20 > And here is my dmesg (without acpi) >=20 >=20 > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 6.1-RELEASE-p1 #3: Mon Jul 3 17:23:38 AST 2006 > root@redevil:/usr/obj/usr/src/sys/LAPTOP > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) M processor 1.86GHz (1862.01-MHz 686-class CPU) > Origin =3D "GenuineIntel" Id =3D 0x6d8 Stepping =3D 8 >=20 > Features=3D0xafe9f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA= ,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,F > XSR,SSE,SSE2,SS,TM,PBE> > Features2=3D0x180<EST,TM2> > real memory =3D 536735744 (511 MB) > avail memory =3D 515883008 (491 MB) > kbd1 at kbdmux0 > cpu0 on motherboard > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard > pci0: <PCI bus> on pcib0 > pcib1: <PCIBIOS PCI-PCI bridge> irq 11 at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > pcib2: <PCIBIOS PCI-PCI bridge> irq 10 at device 28.0 on pci0 > pci2: <PCI bus> on pcib2 > myk0: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.2.3> port > 0xa000-0xa0ff mem 0xbc000000-0xbc > 003fff irq 11 at device 0.0 on pci2 > myk0: Ethernet address: 00:a0:d1:bf:aa:e1 > pcib3: <PCIBIOS PCI-PCI bridge> irq 11 at device 28.1 on pci0 > pci3: <PCI bus> on pcib3 > uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port > 0x1200-0x121f irq 11 at device 29.0 on=20 > pci0 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port > 0x1220-0x123f irq 11 at device 29.1 on=20 > pci0 > uhci1: [GIANT-LOCKED] > usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port > 0x1240-0x125f irq 11 at device 29.2 on=20 > pci0 > uhci2: [GIANT-LOCKED] > usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port > 0x1260-0x127f irq 11 at device 29.3 on=20 > pci0 > uhci3: [GIANT-LOCKED] > usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem > 0xf4000000-0xf40003ff irq 11 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib4: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 > pci6: <PCI bus> on pcib4 > iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xb000b000-0xb000bfff irq 11 at > device 4.0 on pci6 > iwi0: Ethernet address: 00:12:f0:63:ae:ca > cbb0: <PCI-CardBus Bridge> mem 0x13000000-0x13000fff at device 6.0 on > pci6 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > fwohci0: <1394 Open Host Controller Interface> mem > 0xb0000000-0xb00007ff,0xb0004000-0xb0007fff irq 11 at=20 > device 6.2 on pci6 > fwohci0: OHCI version 1.10 (ROM=3D0) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:08:0d:a0:d1:bf:aa:e1 > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode > firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) > firewire0: bus manager 0 (me) > pci6: <mass storage> at device 6.3 (no driver attached) > pci6: <base peripheral> at device 6.4 (no driver attached) > pcm0: <Intel ICH6 (82801FB)> port 0xe000-0xe0ff,0xe100-0xe13f mem > 0xd0000000-0xd00001ff,0xd0000200-0xd000 > 02ff irq 10 at device 30.2 on pci0 > pcm0: <Analog Devices AD1981B AC97 Codec> > pci0: <simple comms, generic modem> at device 30.3 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH6 SATA150 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device > 31.2 on pci0 > atapci0: failed to enable memory mapping! > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xcffff,0xe0000-0xe1fff,0xe5000-0xe5fff,0xeb000-0xeffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > unknown: <PNP0c01> can't assign resources (memory) > unknown: <PNP0303> can't assign resources (port) > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > unknown: <PNP0501> can't assign resources (port) > unknown: <SMCf010> can't assign resources (port) > unknown: <PNP0401> can't assign resources (port) > ums0: Mitsumi Electric Apple Optical USB Mouse, rev 1.10/1.08, addr 2, > iclass 3/1 > ums0: 4 buttons and Z dir. > Timecounter "TSC" frequency 1862008934 Hz quality 800 > Timecounters tick every 1.000 msec > ad0: 76319MB <FUJITSU MHT2080AT 0022> at ata0-master UDMA100 > acd0: DVDR <MATSHITADVD-RAM UJ-831S/1.40> at ata1-master UDMA33 > cd0 at ata1 bus 0 target 0 lun 0 > cd0: <MATSHITA DVD-RAM UJ-831S 1.40> Removable CD-ROM SCSI-0 device=20 > cd0: 33.000MB/s transfers > cd0: cd present [1790992 x 2048 byte records] > Trying to mount root from ufs:/dev/ad0s2a >=20 >=20 > -- > Sincerely, > Yousef Raffah > Senior Systems Administrator > -- >=20 > Aren't you using Firefox? Get it at http://www.getfirefox.com >=20 >=20 -- Sincerely, Yousef Raffah Senior Systems Administrator -- Aren't you using Firefox? Get it at http://www.getfirefox.com --=-XNzvQEkFqzvoYHBkZ7Z6 Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEq9EWH9IXMb4e6CMRAq0CAJ9dDA7DT0t1TJ+sTNrDzi7UTen8yACgkWhJ +5A2+Ylh02amI+vnnGh+PIY= =zYI9 -----END PGP SIGNATURE----- --=-XNzvQEkFqzvoYHBkZ7Z6--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1152110870.677.23.camel>