Date: Tue, 21 Apr 2009 20:13:07 +0400 From: Alex Keda <admin@lissyara.su> To: Roman Makogon <rmakogon@gmail.com> Cc: freebsd-multimedia@freebsd.org, mav@mavhome.dp.ua Subject: Re: Not working sound on HP 2133 Message-ID: <49EDF093.4090707@lissyara.su> In-Reply-To: <d7a8edcd0904210659w3b4876fdk5fd2e4a6c81592fb@mail.gmail.com> References: <1240269789.00102640.1240259402@10.7.7.3> <49ED5CF2.6000204@mavhome.dp.ua> <49ED94AC.7060706@gmail.com> <d7a8edcd0904210659w3b4876fdk5fd2e4a6c81592fb@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Roman Makogon пишет: > It works with headphones, but there's no output in builtin speakers. yes. headphones, works. speakers - not =( verbose dmesg - in attached file > > On Tue, Apr 21, 2009 at 5:41 AM, Ricardo Jesus > <ricardo.meb.jesus@gmail.com> wrote: >> Alexander Motin wrote: >>> Alex Keda wrote: >>>> hdac0@pci0:128:1:0: class=0x040300 card=0x3030103c chip=0x32881106 >>>> rev=0x10 hdr=0x00 >>>> vendor = 'VIA Technologies Inc' >>>> device = '??? VIA VT8251/8237A High Definition Audio Controller - >>>> HDA Codec Realtek ALC660' >>>> class = multimedia >>>> subclass = HDA >>>> >>>> all detected, but - no sound =(( >>> Without verbose messages it is impossible to say anything. >>> >> The snd_via8233 driver supports the VIA VT8237 and VIA VT8251 audio >> chipstes. >> >> To load the driver as a module at boot time, place the following line in >> /boot/loader.conf: >> >> snd_via8233_load="YES" >> >> Have a look at the drivers man page: man snd_via8233. >> _______________________________________________ >> freebsd-multimedia@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia >> To unsubscribe, send any mail to >> "freebsd-multimedia-unsubscribe@freebsd.org" >> > _______________________________________________ > freebsd-multimedia@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@freebsd.org" [-- Attachment #2 --] Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Sun Mar 22 14:52:47 MSK 2009 lissyara@HP.lissyara.su:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1994.93-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60f82 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 usable memory = 1995608064 (1903 MB) avail memory = 1927221248 (1837 MB) ACPI APIC Table: <HP 0944 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Error (tbfadt-0516): 32/64X address mismatch in "Pm2ControlBlock": [ 8800] [ 0 8100], using 64X [20070320] ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <HPQOEM SLIC-MPC> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) unknown: I/O range not supported acpi0: reservation of 0, 8000000 (3) failed acpi0: reservation of 100000, fff00000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xc7ffffff,0xd0200000-0xd020ffff,0xd0300000-0xd03fffff irq 19 at device 5.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci16: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16 miibus0: <MII bus> on bge0 brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bge0: Ethernet address: 00:1f:29:89:38:f3 bge0: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci32: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci48: <ACPI PCI bus> on pcib4 pci48: <network> at device 0.0 (no driver attached) atapci0: <ATI IXP600 SATA300 controller> port 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports PM not supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xd0401000-0xd0401fff irq 23 at device 19.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xd0402000-0xd0402fff irq 17 at device 19.1 on pci0 ohci1: [ITHREAD] usbus1: <OHCI (generic) USB controller> on ohci1 ohci2: <OHCI (generic) USB controller> mem 0xd0403000-0xd0403fff irq 17 at device 19.2 on pci0 ohci2: [ITHREAD] usbus2: <OHCI (generic) USB controller> on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xd0404000-0xd0404fff irq 17 at device 19.3 on pci0 ohci3: [ITHREAD] usbus3: <OHCI (generic) USB controller> on ohci3 ohci4: <OHCI (generic) USB controller> mem 0xd0405000-0xd0405fff irq 17 at device 19.4 on pci0 ohci4: [ITHREAD] usbus4: <OHCI (generic) USB controller> on ohci4 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0406000-0xd04060ff irq 23 at device 19.5 on pci0 ehci0: [ITHREAD] usbus5: EHCI version 1.0 usbus5: <EHCI (generic) USB 2.0 controller> on ehci0 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] hdac0: <ATI SB600 High Definition Audio Controller> irq 16 at device 20.2 on pci0 hdac0: HDA Driver Revision: 20090316_0130 hdac0: [ITHREAD] isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib5 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd0100000-0xd0100fff irq 20 at device 4.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [FILTER] battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Synaptics Touchpad, device ID 3 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 powernow1: <PowerNow! K8> on cpu1 orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ugen0.1: <ATI> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 acd0: DVDR <HL-DT-ST DVDRAM GSA-T20L/NC08> at ata0-master PIO4 ad4: 152627MB <TOSHIBA MK1646GSX LB114C> at ata2-master SATA300 hdac0: HDA Codec #0: Analog Devices AD1981HD hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown) pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0 SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s). Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 usbus4 usbus3 usbus2 uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 usbus4 usbus3 uhub3: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 usbus4 uhub4: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 Root mount waiting for: usbus5 uhub5: 10 ports with 10 removable, self powered (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata0:0:0:0): CAM Status: SCSI Status Error (probe0:ata0:0:0:0): SCSI Status: Check Condition (probe0:ata0:0:0:0): NOT READY csi:0,0,bb,0 asc:3a,0 (probe0:ata0:0:0:0): Medium not present (probe0:ata0:0:0:0): Unretryable error cd0 at ata0 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GSA-T20L NC08> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Root mount waiting for: usbus5 Trying to mount root from ufs:/dev/ad4s1a WARNING: / was not properly dismounted ugen0.2: <Broadcom Corp> at usbus0 ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.00, addr 2> on usbus0 ugen1.2: <Logitech> at usbus1 ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> on usbus1 ums0: 3 buttons and [XYZ] coordinates WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD. WARNING: attempt to net_add_domain(netgraph) after domainfinalize() lock order reversal: 1st 0xfffffffe66c86120 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2549 2nd 0xffffff0003cf5600 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:275 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x81e _sx_xlock() at _sx_xlock+0x55 ufsdirhash_acquire() at ufsdirhash_acquire+0x33 ufsdirhash_remove() at ufsdirhash_remove+0x16 ufs_dirremove() at ufs_dirremove+0x181 ufs_remove() at ufs_remove+0x92 VOP_REMOVE_APV() at VOP_REMOVE_APV+0x93 kern_unlinkat() at kern_unlinkat+0x249 syscall() at syscall+0x1bf Xfast_syscall() at Xfast_syscall+0xab --- syscall (10, FreeBSD ELF64, unlink), rip = 0x80071c22c, rsp = 0x7fffffffe418, rbp = 0x7fffffffef6e --- lock order reversal: 1st 0xffffff00072a5448 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1050 2nd 0xffffff00074879d0 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2100 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x81e __lockmgr_args() at __lockmgr_args+0xc2a vop_stdlock() at vop_stdlock+0x39 VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b _vn_lock() at _vn_lock+0x47 vget() at vget+0x8b devfs_allocv() at devfs_allocv+0x10c devfs_root() at devfs_root+0x52 vfs_donmount() at vfs_donmount+0x1019 nmount() at nmount+0x5a syscall() at syscall+0x1bf Xfast_syscall() at Xfast_syscall+0xab --- syscall (378, FreeBSD ELF64, nmount), rip = 0x8007a9dfc, rsp = 0x7fffffffdd28, rbp = 0x800a04048 --- fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 drm0: <ATI Radeon RS690 X1270 IGP> on vgapci0 info: [drm] MSI enabled 1 message(s) vgapci0: child drm0 requested pci_enable_busmaster info: [drm] Initialized radeon 1.29.0 20080528 info: [drm] Setting GART location based on new memory map info: [drm] Loading RS690/RS740 Microcode info: [drm] Num pipes: 1 info: [drm] writeback test failed drm0: [ITHREAD]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49EDF093.4090707>