Date: Wed, 23 Jan 2002 17:59:05 -0000 From: "Andrew Tulloch" <andrewt@great4.co.uk> To: <freebsd-stable@freebsd.org> Subject: Dell poweredge 500SC Message-ID: <031801c1a437$a59dbfe0$4c0116ac@ANDREWT>
next in thread | raw e-mail | index | archive | help
Just taken delivery of a new Dell Poweredge 500SC and the IDE controller
only seems to be identified as generic, is there anything I can do to
correct this? I'd kinda like to get it's ATA-100 working, not a great worry
as it was a freebie with another order..
I've added dmesg and pciconf -l below.
Thanks
Andrew
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RC #0: Wed Jan 23 15:06:20 GMT 2002
root@apathy:/usr/obj/usr/src/sys/APATHY
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (897.61-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 126840832 (123868K bytes)
Preloaded elf kernel "kernel" at 0xc038e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fc3e0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem
0xfe000000-0xfe0fffff,0xfe123000-0xfe123fff irq 11 at device 2.0 on pci0
fxp0: Ethernet address 00:c0:9f:05:75:17
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xec80-0xecbf mem
0xfe100000-0xfe11ffff,0xfe122000-0xfe122fff irq 10 at device 10.0 on pci0
fxp1: Ethernet address 00:02:b3:95:e3:8f
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GR graphics accelerator> at 11.0
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port
0x8c0-0x8c3,0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at
device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe120000-0xfe120fff irq 5 at
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
ad0: 19073MB <IC35L020AVER07-0> [38752/16/63] at ata0-master BIOSDMA
acd0: CDROM <CRD-8482B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to deny, logging disabled
pciconf -l:
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00091166 rev=0x06
hdr=0x00
chip1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x00091166 rev=0x06
hdr=0x00
fxp0@pci0:2:0: class=0x020000 card=0x010b1028 chip=0x12298086 rev=0x08
hdr=0x00
fxp1@pci0:10:0: class=0x020000 card=0x10508086 chip=0x12298086 rev=0x0d
hdr=0x00
none0@pci0:11:0: class=0x030000 card=0x010b1028 chip=0x47521002
rev=0x27 hdr=0x00
isab0@pci0:15:0: class=0x060100 card=0x02011166 chip=0x02011166
rev=0x92 hdr=0x00
atapci0@pci0:15:1: class=0x01018a card=0xc10b1028 chip=0x02121166
rev=0x92 hdr=0x00
ohci0@pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166
rev=0x05 hdr=0x00
chip2@pci0:15:3: class=0x060000 card=0x02301166 chip=0x02301166
rev=0x00 hdr=0x00
Andrew Tulloch
Lead Web Developer
Great4 Ltd
2nd Floor
200 Grays Inn Road
London
WC1X 8XZ
Tel: 0207 316 3126
Email : andrewt@great4.co.uk
http://www.itv-f1.com
http://www.bar.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?031801c1a437$a59dbfe0$4c0116ac>