Date: Thu, 3 Aug 2006 13:58:11 +0200 From: Gerrit =?ISO-8859-1?Q?K=FChn?= <gerrit@pmp.uni-hannover.de> To: pyunyh@gmail.com Cc: freebsd-stable@freebsd.org Subject: Re: re interface broken Message-ID: <20060803135811.b79cf899.gerrit@pmp.uni-hannover.de> In-Reply-To: <20060803104610.GC49195@cdnetworks.co.kr> References: <20060802161634.eff2b6d1.gerrit@pmp.uni-hannover.de> <20060803002615.GA49195@cdnetworks.co.kr> <20060803105850.5254d278.gerrit@pmp.uni-hannover.de> <20060803104610.GC49195@cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 3 Aug 2006 19:46:10 +0900 Pyun YongHyeon <pyunyh@gmail.com> wrote about Re: re interface broken: PY> > re0@pci2:1:0: class=0x020000 card=0x08600e11 chip=0x813910ec PY> > rev=0x20 hdr=0x00 vendor = 'Realtek Semiconductor' PY> > device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter' PY> > class = network PY> > subclass = ethernet PY> > re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000 PY> > pcib2: re0 requested I/O range 0x2000-0x20ff: in range PY> > re0: <RealTek 8139C+ 10/100BaseTX> port 0x2000-0x20ff mem PY> > 0x90300000-0x903000ff irq 10 at device 1.0 on pci2 pcib2: re0 PY> > requested I/O range 0x2000-0x20ff: in range miibus0: <MII bus> on PY> > re0 rlphy0: <RealTek internal media interface> on miibus0 PY> > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto PY> > re0: bpf attached PY> > re0: Ethernet address: 00:0f:b0:6c:55:ec PY> > re0: [MPSAFE] PY> > re0: [FAST] PY> Would you let me know a if_re.c revison number used to work on your PY> system? I have a working 6.1-stable kernel compiled on 12th of June, so I guess if_re.c from that date or earlier should work. Looking into webcvs, I think that 1.67 worked and 1.68 doesn't. However, to make sure I'd have to check out the old version and recompile. PY> Does Tx/Rx routine on your system work? In order to test it, you PY> need a known working system and run tcpdump on the system. PY> Can you see frames sent from your system on good system? I think it doesn't work. I can do ping -f or whatever I want on the notebook, but the LEDs of the attached switch don't show any packets (they don't flash). cu Gerrit
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060803135811.b79cf899.gerrit>