Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 23 Nov 2001 21:52:09 -0800
From:      Andy Sparrow <spadger@best.com>
To:        current@freebsd.org, mobile@freebsd.org
Subject:   PCCARD/NEWCARD won't configure on 5.0
Message-ID:  <20011124055209.D0E203E31@CRWdog.demon.co.uk>

next in thread | raw e-mail | index | archive | help
This is a multipart MIME message.

--==_Exmh_15546713240
Content-Type: text/plain; charset=us-ascii


Hi,

As -STABLE won't configure the sound device in my HP Omnibook 6100, I gave 
5.0-CURRENT a whirl.

With a NEWCARD-based kernel, it won't configure the Cardbus controller (which 
works under -STABLE) but it /will/ configure the sound device (an ESS 
Allegro-1).

With a PCCARD-based kernel, 5.0 won't configure the card controller or the 
sound.

Setting or unsetting PCI_ENABLE_IO_MODES in the config file doesn't seem to 
make any difference to the behaviour.

The verbose output of both kernels is attached. With the latest XFree86 from 
CVS, this laptop is this close -><- to working, but I can't choose between 
PCCARD (I don't /need/ Cardbus) or sound.

To add insult to injury, it allegedly Just Works in Hed Rat. 

Verbose boot output attached. Anyone got any ideas?


Regards,

AS




--==_Exmh_15546713240
Content-Type: text/plain ; name="dmesg-50-pccard-verbose.txt"; charset=us-ascii
Content-Description: dmesg-50-pccard-verbose.txt
Content-Disposition: attachment; filename="dmesg-50-pccard-verbose.txt"

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sat Nov 24 21:41:33 PST 2001
    root@tureg.geek4food.org:/home/Current/src/sys/i386/compile/test-gen
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0449000.
Calibrating clock(s) ... TSC clock: 1129543867 Hz, i8254 clock: 1193154 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 1129576835 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1129.58-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 267780096 (261504K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00470000 - 0x0ff57fff, 263094272 bytes (64232 pages)
avail memory = 256245760 (250240K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6670
bios32: Entry = 0xfd7f2 (c00fd7f2)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd7f0+0x178
pnpbios: Found PnP BIOS data at 0xc00f6690
pnpbios: Entry = f0000:a2e4  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=35758086)
Using $PIR table, 14 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
	map[10]: type 3, range 32, base e0000000, size 28, enabled
found->	vendor=0x8086, dev=0x3575, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
found->	vendor=0x8086, dev=0x3576, revid=0x02
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	map[20]: type 4, range 32, base 00001800, size  5, enabled
found->	vendor=0x8086, dev=0x2482, revid=0x01
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=10
found->	vendor=0x8086, dev=0x2448, revid=0x41
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
found->	vendor=0x8086, dev=0x248c, revid=0x01
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	map[10]: type 4, range 32, base 000001f0, size  3, enabled
	map[14]: type 4, range 32, base 000003f4, size  2, enabled
	map[18]: type 4, range 32, base 00000170, size  3, enabled
	map[1c]: type 4, range 32, base 00000374, size  2, enabled
	map[20]: type 4, range 32, base 00001820, size  4, enabled
	map[24]: type 1, range 32, base d0000000, size 10, memory disabled
found->	vendor=0x8086, dev=0x248a, revid=0x01
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	intpin=a, irq=255
	map[20]: type 4, range 32, base 00001840, size  5, enabled
found->	vendor=0x8086, dev=0x2483, revid=0x01
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	intpin=b, irq=10
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xd0100000-0xd01fffff
pcib1:   prefetched decode 0xd8000000-0xdfffffff
pci1: physical bus=1
	map[10]: type 3, range 32, base d8000000, size 27, enabled
	map[14]: type 4, range 32, base 00002000, size  8, enabled
	map[18]: type 1, range 32, base d0100000, size 16, enabled
found->	vendor=0x1002, dev=0x4c59, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 10 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x3000-0x3fff
pcib2:   memory decode     0xd0200000-0xd02fffff
pcib2:   prefetched decode 0xf0000000-0xf00fffff
pci2: physical bus=2
	map[10]: type 3, range 32, base f0018000, size  6, enabled
	map[14]: type 3, range 32, base f0000000, size 16, enabled
	map[18]: type 3, range 32, base f0010000, size 15, enabled
	map[1c]: type 4, range 32, base 00003400, size  6, enabled
found->	vendor=0x10b7, dev=0x1007, revid=0x00
	bus=2, slot=2, func=0
	class=07-80-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=10
	powerspec 2  supports D0 D2 D3  current D0
	map[10]: type 4, range 32, base 00003000, size  8, port disabled
found->	vendor=0x125d, dev=0x1988, revid=0x12
	bus=2, slot=3, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x104c, dev=0xac51, revid=0x00
	bus=2, slot=5, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x104c, dev=0xac51, revid=0x00
	bus=2, slot=5, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	intpin=b, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0200000, size 12, enabled
	map[14]: type 4, range 32, base 00003440, size  6, enabled
found->	vendor=0x8086, dev=0x1038, revid=0x41
	bus=2, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pci2: <PCI bus> on pcib2
pci2: <simple comms> at device 2.0 (no driver attached)
pci2: <multimedia, audio> at device 3.0 (no driver attached)
pci_cfgintr_search: linked (62) to configured irq 0 at 0:31:0
pci_cfgintr: 0:30 INTC routed to irq 0
pcib2: routed slot 5 INTA to irq 0
pcic0: <TI PCI-1420 PCI-CardBus Bridge> irq 0 at device 5.0 on pci2
pcib2: device pcic0 requested unsupported memory range 0x44000000-0xffffffff (decoding 0xd0200000-0xd02fffff, 0xf0000000-0xf00fffff)
pcic0: Could not grab register memory
device_probe_and_attach: pcic0 attach returned 12
pci_cfgintr_linked: linked (63) to hard-routed irq 10
pci_cfgintr: 0:30 INTD routed to irq 10
pcib2: routed slot 5 INTB to irq 10
pcic0: <TI PCI-1420 PCI-CardBus Bridge> irq 10 at device 5.1 on pci2
pcib2: device pcic0 requested unsupported memory range 0x44000000-0xffffffff (decoding 0xd0200000-0xd02fffff, 0xf0000000-0xf00fffff)
pcic0: Could not grab register memory
device_probe_and_attach: pcic0 attach returned 12
fxp0: <Intel Pro/100 Ethernet> port 0x3440-0x347f mem 0xd0200000-0xd0200fff irq 10 at device 8.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xd0200000-0xd0200fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:c0:9f:04:82:0c
fxp0: PCI IDs: 8086 1038 103c 001a 0041
fxp0: Dynamic Standby mode is disabled
inphy0: <i82562EM 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1820-0x182f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1820
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1828
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe 14 eb
ata1-slave: ATAPI probe 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ata-: ata0 already exists, skipping it
ata-: ata1 already exists, skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 17 devices, largest 234 bytes
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1
PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
PNP0c02: adding io range 0x50-0x53, size=0x4, align=0x1
PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1
PNP0c02: adding io range 0x74-0x75, size=0x2, align=0x1
PNP0c02: adding io range 0x76-0x77, size=0x2, align=0x1
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x90-0x91, size=0x2, align=0x1
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0x1
PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1
PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1
PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1
PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1
PNP0c02: adding fixed memory32 range 0xfebffc00-0xfebfffff, size=0x400
PNP0c02: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x1007fbff, size=0xff7fc00
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 4 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0c02: adding fixed memory32 range 0xce000-0xcffff, size=0x2000
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 11 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1
PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1
PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1
pnpbios: handle 12 device ID PNP0c02 (020cd041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
INT0800: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
INT0800: adding fixed memory32 range 0xffa80000-0xffafffff, size=0x80000
INT0800: adding fixed memory32 range 0xffa00000-0xffa7ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff980000-0xff9fffff, size=0x80000
INT0800: adding fixed memory32 range 0xff900000-0xff97ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff880000-0xff8fffff, size=0x80000
INT0800: adding fixed memory32 range 0xff800000-0xff87ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff000000-0xff07ffff, size=0x80000
pnpbios: handle 13 device ID INT0800 (0008d425)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x2
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 18 device ID PNP0700 (0007d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 19 device ID PNP0501 (0105d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 23 device ID PNP0f13 (130fd041)
ex_isa_identify()
sc-: sc0 already exists, skipping it
vga-: vga0 already exists, skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcdfff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0: <Intel i82365SL-DF> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pccard1: <PC Card bus (classic)> on pcic0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 1/0/0 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 ce 4f 7f 83 84 92 
28 92 00 6f 0d 0e 00 00 07 80 d5 88 8f 28 1f d4 
e4 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 ce 4f 7f 83 84 92 
28 92 00 6f 0d 0e 00 00 07 80 d5 88 8f 28 1f d4 
e4 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff,0xffb00000-0xffb7ffff,0xffa80000-0xffafffff,0xffa00000-0xffa7ffff,0xff980000-0xff9fffff,0xff900000-0xff97ffff,0xff880000-0xff8fffff,0xff800000-0xff87ffff,0xff000000-0xff07ffff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
BIOS Geometries:
 0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ad0: <IC25N030ATDA04-0/DA4OA70A> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA CD/DVD-ROM SD-C2502/1915> DVD-ROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xa0, start 63, end = 45359, size 45297 : OK
ad0s2: type 0xa5, start 45360, end = 58605119, size 58559760 : OK
start_init: trying /sbin/init

--==_Exmh_15546713240
Content-Type: text/plain ; name="dmesg-50-newcard-verbose.txt"; charset=us-ascii
Content-Description: dmesg-50-newcard-verbose.txt
Content-Disposition: attachment; filename="dmesg-50-newcard-verbose.txt"

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sat Nov 24 18:38:34 PST 2001
    root@tureg.geek4food.org:/home/Current/src/sys/i386/compile/test
Preloaded elf kernel "/boot/kernel/kernel" at 0xc045d000.
Calibrating clock(s) ... TSC clock: 1129541230 Hz, i8254 clock: 1193151 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 1129576993 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1129.58-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 267780096 (261504K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00484000 - 0x0ff57fff, 263012352 bytes (64212 pages)
avail memory = 256163840 (250160K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6670
bios32: Entry = 0xfd7f2 (c00fd7f2)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd7f0+0x178
pnpbios: Found PnP BIOS data at 0xc00f6690
pnpbios: Entry = f0000:a2e4  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=35758086)
Using $PIR table, 14 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
	map[10]: type 3, range 32, base e0000000, size 28, enabled
found->	vendor=0x8086, dev=0x3575, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
found->	vendor=0x8086, dev=0x3576, revid=0x02
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	map[20]: type 4, range 32, base 00001800, size  5, enabled
found->	vendor=0x8086, dev=0x2482, revid=0x01
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=10
found->	vendor=0x8086, dev=0x2448, revid=0x41
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
found->	vendor=0x8086, dev=0x248c, revid=0x01
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	map[10]: type 4, range 32, base 000001f0, size  3, enabled
	map[14]: type 4, range 32, base 000003f4, size  2, enabled
	map[18]: type 4, range 32, base 00000170, size  3, enabled
	map[1c]: type 4, range 32, base 00000374, size  2, enabled
	map[20]: type 4, range 32, base 00001820, size  4, enabled
	map[24]: type 1, range 32, base d0000000, size 10, memory disabled
found->	vendor=0x8086, dev=0x248a, revid=0x01
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	intpin=a, irq=255
	map[20]: type 4, range 32, base 00001840, size  5, enabled
found->	vendor=0x8086, dev=0x2483, revid=0x01
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	intpin=b, irq=10
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xd0100000-0xd01fffff
pcib1:   prefetched decode 0xd8000000-0xdfffffff
pci1: physical bus=1
	map[10]: type 3, range 32, base d8000000, size 27, enabled
	map[14]: type 4, range 32, base 00002000, size  8, enabled
	map[18]: type 1, range 32, base d0100000, size 16, enabled
found->	vendor=0x1002, dev=0x4c59, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 10 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x3000-0x3fff
pcib2:   memory decode     0xd0200000-0xd02fffff
pcib2:   prefetched decode 0xf0000000-0xf00fffff
pci2: physical bus=2
	map[10]: type 3, range 32, base f0018000, size  6, enabled
	map[14]: type 3, range 32, base f0000000, size 16, enabled
	map[18]: type 3, range 32, base f0010000, size 15, enabled
	map[1c]: type 4, range 32, base 00003400, size  6, enabled
found->	vendor=0x10b7, dev=0x1007, revid=0x00
	bus=2, slot=2, func=0
	class=07-80-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=10
	powerspec 2  supports D0 D2 D3  current D0
	map[10]: type 4, range 32, base 00003000, size  8, port disabled
found->	vendor=0x125d, dev=0x1988, revid=0x12
	bus=2, slot=3, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x104c, dev=0xac51, revid=0x00
	bus=2, slot=5, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x104c, dev=0xac51, revid=0x00
	bus=2, slot=5, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	intpin=b, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0200000, size 12, enabled
	map[14]: type 4, range 32, base 00003440, size  6, enabled
found->	vendor=0x8086, dev=0x1038, revid=0x41
	bus=2, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pci2: <PCI bus> on pcib2
pci2: <simple comms> at device 2.0 (no driver attached)
pci2: <multimedia, audio> at device 3.0 (no driver attached)
pccbb0: <TI1420 PCI-CardBus Bridge> at device 5.0 on pci2
pcib2: device pccbb0 requested unsupported memory range 0x10000000-0xffffffff (decoding 0xd0200000-0xd02fffff, 0xf0000000-0xf00fffff)
pccbb0: Could not grab register memory
device_probe_and_attach: pccbb0 attach returned 12
pccbb0: <TI1420 PCI-CardBus Bridge> at device 5.1 on pci2
pcib2: device pccbb0 requested unsupported memory range 0x10000000-0xffffffff (decoding 0xd0200000-0xd02fffff, 0xf0000000-0xf00fffff)
pccbb0: Could not grab register memory
device_probe_and_attach: pccbb0 attach returned 12
fxp0: <Intel Pro/100 Ethernet> port 0x3440-0x347f mem 0xd0200000-0xd0200fff irq 10 at device 8.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xd0200000-0xd0200fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:c0:9f:04:82:0c
fxp0: PCI IDs: 8086 1038 103c 001a 0041
fxp0: Dynamic Standby mode is disabled
inphy0: <i82562EM 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1820-0x182f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1820
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1828
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe 14 eb
ata1-slave: ATAPI probe 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ata-: ata0 already exists, skipping it
ata-: ata1 already exists, skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 17 devices, largest 234 bytes
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1
PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
PNP0c02: adding io range 0x50-0x53, size=0x4, align=0x1
PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1
PNP0c02: adding io range 0x74-0x75, size=0x2, align=0x1
PNP0c02: adding io range 0x76-0x77, size=0x2, align=0x1
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x90-0x91, size=0x2, align=0x1
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0x1
PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1
PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1
PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1
PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1
PNP0c02: adding fixed memory32 range 0xfebffc00-0xfebfffff, size=0x400
PNP0c02: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x1007fbff, size=0xff7fc00
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 4 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0c02: adding fixed memory32 range 0xce000-0xcffff, size=0x2000
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 11 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1
PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1
PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1
pnpbios: handle 12 device ID PNP0c02 (020cd041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
INT0800: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
INT0800: adding fixed memory32 range 0xffa80000-0xffafffff, size=0x80000
INT0800: adding fixed memory32 range 0xffa00000-0xffa7ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff980000-0xff9fffff, size=0x80000
INT0800: adding fixed memory32 range 0xff900000-0xff97ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff880000-0xff8fffff, size=0x80000
INT0800: adding fixed memory32 range 0xff800000-0xff87ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff000000-0xff07ffff, size=0x80000
pnpbios: handle 13 device ID INT0800 (0008d425)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x2
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 18 device ID PNP0700 (0007d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 19 device ID PNP0501 (0105d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 23 device ID PNP0f13 (130fd041)
sc-: sc0 already exists, skipping it
vga-: vga0 already exists, skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
adv0 failed to probe on isa0
bt0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 ce 4f 7f 83 84 92 
28 92 00 6f 0d 0e 00 00 07 80 d5 88 8f 28 1f d4 
e4 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 ce 4f 7f 83 84 92 
28 92 00 6f 0d 0e 00 00 07 80 d5 88 8f 28 1f d4 
e4 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vt0 failed to probe on isa0
pmtimer0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 irq 10 on isa0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 1/0/0 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff,0xffb00000-0xffb7ffff,0xffa80000-0xffafffff,0xffa00000-0xffa7ffff,0xff980000-0xff9fffff,0xff900000-0xff97ffff,0xff880000-0xff8fffff,0xff800000-0xff87ffff,0xff000000-0xff07ffff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
BIOS Geometries:
 0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ad0: <IC25N030ATDA04-0/DA4OA70A> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA CD/DVD-ROM SD-C2502/1915> DVD-ROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xa0, start 63, end = 45359, size 45297 : OK
ad0s2: type 0xa5, start 45360, end = 58605119, size 58559760 : OK
start_init: trying /sbin/init

--==_Exmh_15546713240--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011124055209.D0E203E31>