Date: Fri, 13 Sep 2002 20:31:00 +0200 From: Ulrich 'Q' Spoerlein <q@uni.de> To: multimedia@freebsd.org Subject: Hauppauge + Geforce2MX == Not Possible? Message-ID: <kda4oucqmmcaidj5g53qvjbvgn6bo2albc@4ax.com>
next in thread | raw e-mail | index | archive | help
Hi there, either i'm too stupid to set this up, or there is something seriously broken. I have two Hauppauge Models here, one is a cheap one with only mono-sound. the other one has a FM-Stereo Tuner. mono-card: WinTV Model 44004 REV C108 dmesg output: bktr0: Hauppauge Model 44004 C108 bktr0: Hauppauge WinCast/TV, Philips PAL I tuner. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 9.1 irq 5 stereo-card: WinTV Model 44354 REV C221 MSP3415D B3 (this is the FM tuner?) dmesg output: bktr0: Hauppauge Model 44354 C221 bktr0: Detected a MSP3415D-B3 at 0x80 bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, remote control. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 9.1 irq 5 both chips have the Conexant Fusion 878A Chip and look virtually identical. this is the relevant part of the kernel config: device bktr device smbus device iicbus device iicbb device iicsmb options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL options BKTR_USE_PLL options BKTR_GPIO_ACCESS and this is in /etc/sysctl.conf hw.bt848.card=2 hw.bt848.tuner=10 hw.bt848.format=0 Both cards worked with fxtv till 4.5 or 4.4 i can't remember. i'm now running 4.7-PRE and right now nothing works. let's start with the crashes and computer freezes. putting in both cards at the same time will result in a kernel panic at boot-up (i think when setting the sysctl-variables). running xawtv in overlaymode doesn't work (only black window visible) and shutting down X afterwards freezes the computer, and after waiting 4-5 seconds reboots the machine. running xawtv in grabdisplay mode doesn't freeze the machine at shutdown, but i only get sound with the mono card. the stereo card remains silent. (and grabdisplay is very slow). i think the problem here is with the 'nv' driver. i also tried the (very early) 'nvidia' driver but it didn't fix the problem. i replaced the GeForce with an old S3 Trio 64 and overlay mode worked (still no sound with the stereo card). now fxtv only uses grabdisplay mode and when setting audio to "internal mode" it used to work with even with the stereo card. but since...well sometime around 4.5 even fxtv stopped doing what i wanted it to do. right now i can only get a picture when running it with -driverDefaults. though the picture i get runs at about 5fps. if i omit the -driverDefaults i can get sound but there is no way i can get any picture at all. even fiddling with the Fxtv in /usr/X11R6/lib/X11/app-defaults doesn't do anything. right now the only working setup is mono-card + xawtv + grabdisplay. the bad thing is: i already sold the mono-card in favour of the stereo card, so i can't use this card for much longer (the surely guy wants it someday) i already had a conversation with the xawtv-writer and xawtv-port maintainer, but both couldn't really help me :( the next thing i'm doing now is installing -current (but i don't see any chance of this fixing my problems :( any help would be greatly appreciated! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?kda4oucqmmcaidj5g53qvjbvgn6bo2albc>