Date: Wed, 29 May 1996 15:50:24 -0500 (EST) From: Richard J Kuhns <rjk@grauel.com> To: freebsd-bugs@freebsd.org Cc: seb@wintek.com Subject: still having problems with a news server... (now 2.1-stable) Message-ID: <199605292050.PAA03871@watson.grauel.com>
next in thread | raw e-mail | index | archive | help
Last week I posted some info on a problem we were having with a news server
-- regular 'panic: page fault' messages, followed by filesystem corruption
so bad it wasn't worth fixing. Several people said to try upgrading to
-stable, which we did (the 'make world' took a little over 48 hours :-().
maxusers has also been bumped to 40.
The machine has been running since yesterday (which is better than it had
been), but: a little while ago we found the message
'aha0: Invalid CCB or segment list'
on the console. After taking the machine to single-user, running fsck on
the news spool partition showed the same type of corruption we'd previously
seen after the panics, just not as bad/widely spread.
Any suggestions? Which particular piece of hardware should we swap first?
FWIW, the news spool partition is on one of those Micropolis 4GB drives
that moonlights as a space heater, and it does seem to be fairly warm.
All help will be greatly appreciated...
dmesg produces the following:
FreeBSD 2.1-STABLE #0: Fri May 24 20:27:05 EST 1996
root@news.wintek.com:/usr/src/sys/compile/NEWS
CPU: i486DX (486-class CPU)
Origin = "AuthenticAMD" Id = 0x494
real memory = 67108864 (65536K bytes)
avail memory = 63266816 (61784K bytes)
Probing for devices on the ISA bus:
scprobe: keyboard RESET failed (result = 0xfa)
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:da:94:b5, type SMC8216T (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <M1614TA>
wd0: 1040MB (2130912 sectors), 2114 cyls, 16 heads, 63 S/T, 512 B/S
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0 waiting for scsi devices to settle
(aha0:0:0): "MICROP 2210-09MZ1001905 HQ30" type 0 fixed SCSI 2
sd0(aha0:0:0): Direct-Access 1008MB (2065250 512 byte sectors)
(aha0:1:0): "MICROP 3243-19MZ Q4D HT02" type 0 fixed SCSI 2
sd1(aha0:1:0): Direct-Access 4095MB (8388315 512 byte sectors)
aha1 not found at 0x334
npx0 on motherboard
npx0: INT 16 interface
aha0: Invalid CCB or segment list
--
Rich Kuhns rjk@grauel.com
PO Box 6249
100 Sawmill Road
Lafayette, IN 47903
(317)477-6000 x319
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199605292050.PAA03871>