Date: Tue, 31 Jul 2001 19:26:25 -0700 From: Sean Lewis <sean@typhoon.sharp.com> To: freebsd-hardware@freebsd.org Subject: UDMA problems w/ 4.3-STABLE Message-ID: <20010731192625.A14945@typhoon.sharp.com>
next in thread | raw e-mail | index | archive | help
hi all, I have two drive-related problems that may or may not be related. First off, let me give you some specs on my machine: ABIT VP6 mainboard 2x933MHz processors HPT370 onboard UDMA/100 controller 4x256MB PC133 SDRAM 1 IBM 75Gig HD 1 Western Digital 60Gig HD 16X Pioneer DVD drive 10X/8X/32X HP 9300 CD-RW drive the drives recognize fine in the bios and everything, I have them both hooked up to the Primary controller on the board. When I boot FreeBSD I get the following messages: ad4: 73308MB <IBM-DTLA-307075> [148945/16/63] at ata2-master UDMA100 ad5: 57241MB <WDC WD600AB-00BVA0> [116301/16/63] at ata2-slave UDMA100 acd0: DVD-ROM <TOSHIBA DVD-ROM SD-M1502> at ata0-master using PIO4 (null): MODE_SENSE_BIG command timeout - resetting ata0: resetting devices .. done (null): read data overrun 30/0 (null): MODE_SENSE_BIG command timeout - resetting ata0: resetting devices .. done (null): read data overrun 30/0 (null): MODE_SENSE_BIG command timeout - resetting ata0: resetting devices .. done (null): read data overrun 30/0 (null): MODE_SENSE_BIG command timeout - resetting ata0: resetting devices .. done acd1: CD-RW <Hewlett-Packard CD-Writer Plus 9300> at ata0-slave using PIO4 I am not sure if this is a controller problem - I've swapped out the CD-RW drive for a Sony model and I get the same result. Afterwards, when I start using the box [logging in, etc] I get the following: ad4s1a: UDMA ICRC error reading fsbn 68463183 of 34231560-34231687 (ad4s1 bn 68463183; cn 7494 tn 87 sn 12) retrying ad4s1a: UDMA ICRC error reading fsbn 68457535 of 34228736-34228815 (ad4s1 bn 68457535; cn 7493 tn 142 sn 34) retrying ad4s1a: UDMA ICRC error reading fsbn 27382831 of 13691384-13691447 (ad4s1 bn 27382831; cn 2997 tn 83 sn 7) retrying ad4s1a: UDMA ICRC error reading fsbn 87566783 of 43783360-43783439 (ad4s1 bn 87566783; cn 9585 tn 123 sn 59) retrying ad4s1a: UDMA ICRC error reading fsbn 109594399 of 54797168-54797223 (ad4s1 bn 109594399; cn 11997 tn 28 sn 40) retrying so on and so forth.. ad4s1a: UDMA ICRC error reading fsbn 282735839 of 141367888-141368143 (ad4s1 bn 282735839; cn 30950 tn 120 sn 29) falling back to PIO mode and the drive falls into PIO mode. I've tried changing to a higher quality / longer cable.. same result. I haven't found any hard evidence of known issues like this while doing web research, but I've noticed people with similar problems and different controller cards. Any insight that could be provided would be greatly appreciated. More info: FreeBSD hurricane.hypnotrip.net 4.3-STABLE FreeBSD 4.3-STABLE #3: Wed Jul 4 10:10:18 PDT 2001 root@hurricane.hypnotrip.net:/usr/src/sys/compile/HURRICANE i386 Thanks in advance, Sean To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010731192625.A14945>