Date: Thu, 3 Nov 2011 21:11:18 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-current@freebsd.org Cc: Jan Henrik Sylvester <me@janh.de> Subject: Re: USB3 express card panics on 9.0-RC1 Message-ID: <201111032111.18806.hselasky@c2i.net> In-Reply-To: <4EB2895B.3080104@janh.de> References: <4EB1602C.6030807@janh.de> <4EB27225.4020504@janh.de> <4EB2895B.3080104@janh.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 03 November 2011 13:30:19 Jan Henrik Sylvester wrote: > On 11/03/2011 11:51, Jan Henrik Sylvester wrote: > > On 11/03/2011 09:27, Hans Petter Selasky wrote: > >> On Wednesday 02 November 2011 16:22:20 Jan Henrik Sylvester wrote: > >>> I have bought a "Super-speed Express Card To USB 3.0 1-Port" to connect > >>> an USB3 hard disk to my Thinkpad T510, which only has USB2. > >>> > >>> Trying to hot plug the express card did nothing, but I guess that is > >>> expected. Hence, I booted with the express card already inserted, only > >>> to receive a panic upon xhci0 initialization, see below. > >>> > >>> This is on FreeBSD 9.0-RC1/amd64 with a generic kernel installed from > >>> the official DVD. > >>> > >>> I guess I could test 226803 mentioned in > >>> http://lists.freebsd.org/pipermail/freebsd-usb/2011-October/010746.html > >>> , which happened after RC1, but from the commit message, it only fixes > >>> suspend and resume. > >>> > >>> As I do not have much time now, should I test 226803, find a Linux CD > >>> to actually identify the device, or anything else? > >>> > >>> Cheers, > >>> Jan Henrik > >>> > >>> > >>> usbus0: 480 Mbps High Speed USB v2.0 > >>> > >>> Fatal trap 12: page fault while in kernel mode > >>> cpuid = 0; apic id = 00 > >>> fault virtual address = 0x18 > >>> fault code = supervisor write data, page not present > >>> instruction ponter = 0x20:0xffffffff806e80aa > >>> stack pointer = 0x28:0xffffff810ee50bc0 > >>> frame pointer = 0x28:0xffffff810ee50bf0 > >>> code segment = base 0x0, limit 0xfffff, type 0x16 > >>> = DPL 0, pres 1, long 1, def32 0, gran 1 > >>> processor eflags = interrupt enabled, resume, IOPL = 0 > >>> current process = 15 (xhci0) > >>> trap number = 12 > >>> panic: page fault > >>> cpuid = 0 > >>> Uptime = 1s > >>> Automatic reboot in 15 seconds - press a key on the console to abort > >> > >> Hi, > >> > >> This looks like a NULL-pointer issue inside "xhci_configure_msg()" which > >> probably should be easy to fix. > >> > >> Could you compile and boot a kernel with kernel debugging enable so > >> that you > >> get a backgtrace? > > > > I have not done this before. > > > > The GENERIC kernel already contains "makeoptions DEBUG=-g" (at least it > > is in /usr/src/sys/amd64/conf/GENERIC and there are all this large > > /boot/kernel/*.symbols). Is there anything else needed? (I do not need > > all the stuff that Ken Smith took out just before RC1 in r226405 just to > > get a trace, since I do not want to do online debugging, or do I need it > > anyhow?) > > > > From > > > > http://www.freebsd.org/doc/en/books/developers-handbook/kerneldebug.html > > , I thought that setting dumpdev="AUTO" in /etc/rc.conf was enough to > > get a dump in /var/crash/ after the next boot to multiuser. That does > > not seem to be the case for me. What else do I have to do? > > After reading a bit more, I still do not know why I do not get a crash > dump with dumpdev="AUTO" (and /var/crash/ having enough space for a full > memory dump). Is it too early during boot for dumpon to be set? Try removing "device xhci" from the kernel config file and "kldload xhci" from the root prompt. Then I think you will get the kernel dump. --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201111032111.18806.hselasky>