Date: Fri, 12 Jan 2001 15:58:08 -0600 From: David W.Chapman Jr. <dwcjr@inethouston.net> To: current@FreeBSD.org Subject: unknown devices Message-ID: <01011215580804.01504@dwcjr.inethouston.net>
next in thread | raw e-mail | index | archive | help
Down near the botton I have some unknown pnp devices, is there any way to figure out what devices they are, they must be motherboard resources because all other devices seem to be accounted for. Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #5: Fri Jan 12 11:14:56 CST 2001 poseiden@dwcjr.inethouston.net:/usr/src/sys/compile/DWCJR Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1102506314 Hz CPU: AMD Athlon(tm) Processor (1102.51-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> real memory = 402587648 (393152K bytes) config> avail memory = 387854336 (378764K bytes) Preloaded elf kernel "kernel" at 0xc03b3000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03b309c. Preloaded elf module "vesa.ko" at 0xc03b30ec. Preloaded elf module "if_xl.ko" at 0xc03b3188. Preloaded elf module "miibus.ko" at 0xc03b3228. Preloaded elf module "usb.ko" at 0xc03b32c8. Preloaded elf module "bktr.ko" at 0xc03b3364. Preloaded elf module "bktr_mem.ko" at 0xc03b3400. Preloaded elf module "random.ko" at 0xc03b34a0. Preloaded elf module "agp.ko" at 0xc03b3540. Preloaded elf module "snd_es137x.ko" at 0xc03b35dc. Preloaded elf module "snd_pcm.ko" at 0xc03b3680. bktr_mem: memory holder loaded Pentium Pro MTRR support enabled VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc032a2e2 (1000022) VESA: NVidia ACPI debug layer 0x0 debug level 0x0 Using $PIR table, 8 entries at 0xc00f7960 acpi0: <AMIINT > on motherboard acpi0: power button is handled as a fixed feature programming model. acpi_tz0: <thermal zone> on acpi0 acpi_tz0: current temperature 52.0C acpi_button0: <Control Method Power Button Device> on acpi0 acpi_pcib0: <Host-PCI bridge> on acpi0 pci0: <PCI bus> on acpi_pcib0 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at 7.4 (no driver attached) ahc0: <Adaptec 2940 Pro Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xdffff000-0xdfffffff irq 9 at device 12.0 on pci0 aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs bktr0: <BrookTree 878> mem 0xdddfc000-0xdddfcfff irq 10 at device 13.0 on pci0 bktr0: Warning - card vendor 0x1002 (model 0x0001) unknown. bktr0: Detected a MSP3430G-A4 at 0x80 bktr0: Pinnacle/Miro TV, Temic NTSC tuner, msp3400c stereo. pci0: <multimedia> at 13.1 (no driver attached) pcm0: <AudioPCI ES1371> port 0xd400-0xd43f irq 11 at device 14.0 on pci0 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xdfffef80-0xdfffefff irq 5 at device 15.0 on pci0 xl0: Ethernet address: 00:50:04:b7:13:09 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto acpi_button1: <Control Method Sleep Button Device> on acpi0 acpi_timer0: <24-bit timer at 3.579545MHz> on acpi0 npx0: <math processor> on motherboard npx0: INT 16 interface atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fd1: <1200-KB 5.25" drive> on fdc0 drive 1 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0200> can't assign resources unknown: <PNP0F03> can't assign resources unknown: <PNP0303> can't assign resources unknown: <PNP0700> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0401> can't assign resources unknown: <PNP0400> can't assign resources ad0: 6149MB <WDC WD64AA> [13328/15/63] at ata0-master UDMA66 ad1: 2317MB <Maxtor 82400D4> [4708/16/63] at ata0-slave UDMA33 acd0: CDROM <CREATIVECD3220E> at ata1-master using PIO4 Waiting 5 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad1s1a cd0 at ahc0 bus 0 target 3 lun 0 cd0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: cd present [1 x 2048 byte records] pcm0: hwptr went backwards 2208 -> 2016 ------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01011215580804.01504>