Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 17 Oct 2005 18:37:04 -0400
From:      "Dan Langille" <dan@langille.org>
To:        Scott Long <scottl@samsco.org>
Cc:        freebsd-current@freebsd.org, Mike Tancsa <mike@sentex.net>
Subject:   Re: RAID on 6.0-RC1
Message-ID:  <4353EF50.24917.962A0058@localhost>

next in thread | raw e-mail | index | archive | help
On 17 Oct 2005 at 17:51, Scott Long <scottl@samsco.org wrote:

> On 17 Oct 2005 at 7:07, Scott Long wrote:
> 
> > Dan Langille wrote:
> > > On 17 Oct 2005 at 7:05, Mike Tancsa wrote:
> > > 
> > > 
> > >>At 06:54 AM 17/10/2005, Dan Langille wrote:
> > >>
> > >>>Anyone running RAID on 6.0-RC1, specifically twed?
> > >>
> > >>Yes.
> > >>% uname -a
> > >>FreeBSD tor1-o.sentex.ca 6.0-RC1 FreeBSD 6.0-RC1 #0: Wed Oct 12 
> > >>10:08:51 EDT 
> > >>2005     mdtancsa@tor1-o.sentex.ca:/usr/obj/usr/src/sys/global  i386
> > >>
> > >>% df
> > >>Filesystem    1K-blocks    Used    Avail Capacity  Mounted on
> > >>/dev/twed0s1a   1012974   63220   868718     7%    /
> > >>devfs                 1       1        0   100%    /dev
> > >>/dev/twed0s1e  10154158  694842  8646984     7%    /home
> > >>/dev/twed0s1f  20308398       4 18683724     0%    /securestorage
> > >>/dev/twed0s1g   2026030    6000  1857948     0%    /tmp
> > >>/dev/twed0s1d  20308398 2645286 16038442    14%    /usr
> > >>/dev/twed0s1h  19831118  499396 17745234     3%    /var
> > >>devfs                 1       1        0   100%    /var/named/dev
> > >>
> > >>
> > >>
> > >>>When booting from the 6.0-RC1 install CD, I'm getting twed0 found on
> > >>>probing.  The results look right.  But then the install freezes (I
> > >>>waited an hour). I have a screen shot which produced with a boot -v:
> > >>
> > >>Where does it get stuck when doing a boot -v
> > > 
> > > 
> > > See this screen shot:
> > > 
> > >     <http://www.langille.org/tmp/6.0RC1-twed.jpg>;
> > > 
> > > BTW:  Since composing that message, I tried "unset acpi_load".  That 
> > > gets me into the installer.  That's when using the twed. I haven't 
> > > tried the Promise with the unset yet.
> > 
> > Likely an interrupt routing problem.  More information on your 
> > motherboard, as well as a real console log during boot, is needed
> > to say anything else.
> 
> The motherboard is an ASUS A8V DEluce, with ACPI BIOS Revision 1009.

Ummm, that's Deluxe...
 
> The AMIBIOS is version 08.00.09 dated 12/22/04.   It's running an AMD 
> Ahtlon 64 3000+ at 1800MHz.

Rev 2.00
-- 
Dan Langille : http://www.langille.org/
BSDCan - The Technical BSD Conference - http://www.bsdcan.org/





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4353EF50.24917.962A0058>