Date: Tue, 14 Jun 2011 09:24:57 +0200 From: Bernhard Schmidt <bschmidt@freebsd.org> To: Tom <bifrost@minions.com> Cc: freebsd-wireless@freebsd.org Subject: Re: iwn 6205a on -STABLE Message-ID: <201106140924.57943.bschmidt@freebsd.org> In-Reply-To: <Pine.BSF.4.64.1106131536020.22064@evil.minions.com> References: <Pine.BSF.4.64.1106131536020.22064@evil.minions.com>
index | next in thread | previous in thread | raw e-mail
On Tuesday, June 14, 2011 00:49:40 Tom wrote: > Howdy, > I've got an Intel wireless card that appears to be supported by the > driver, but whenever it is used, it stops working after about 60-65 > seconds when connected to a WPA network. I haven't tested with an open > wireless yet.. It dumps out what looks like a firmware debug. I did send you iwn archive couple of days ago, did you test that? From the log below apparently not. The 6005 support in HEAD received a few updates, not just the firmware, you need those for the driver to work. > Here's what shows up in dmesg for it: > iwn0: <Intel(R) PRO/Wireless 6205a> mem 0xd2500000-0xd2501fff irq 17 at > device 0.0 on pci3 > iwn0: MIMO 2T2R, MoW, address a0:88:b4:2c:0e:4c > iwn0: [ITHREAD] > iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > 24Mbps 36Mbps 48Mbps 54Mbps > > > pciconf output: > iwn0@pci0:3:0:0: class=0x028000 card=0x13118086 chip=0x00858086 > rev=0x34 hdr=0x00 > vendor = 'Intel Corporation' > class = network > > Here's the firmware dump: > firmware error log: > error type = "UNKNOWN" (0x00000034) > program counter = 0x0000F648 > source line = 0x0000E10C > error data = 0x0000000207030000 > branch link = 0x0000F6340000F666 > interrupt link = 0x0000D2520000C0CC > time = 1054921304 > driver status: > tx ring 0: qid=0 cur=203 queued=4 > tx ring 1: qid=1 cur=0 queued=0 > tx ring 2: qid=2 cur=0 queued=0 > tx ring 3: qid=3 cur=5 queued=0 > tx ring 4: qid=4 cur=68 queued=0 > tx ring 5: qid=5 cur=0 queued=0 > tx ring 6: qid=6 cur=0 queued=0 > tx ring 7: qid=7 cur=0 queued=0 > tx ring 8: qid=8 cur=0 queued=0 > tx ring 9: qid=9 cur=0 queued=0 > tx ring 10: qid=10 cur=0 queued=0 > tx ring 11: qid=11 cur=0 queued=0 > tx ring 12: qid=12 cur=0 queued=0 > tx ring 13: qid=13 cur=0 queued=0 > tx ring 14: qid=14 cur=0 queued=0 > tx ring 15: qid=15 cur=0 queued=0 > tx ring 16: qid=16 cur=0 queued=0 > tx ring 17: qid=17 cur=0 queued=0 > tx ring 18: qid=18 cur=0 queued=0 > tx ring 19: qid=19 cur=0 queued=0 > rx ring: cur=2 > > I duplicated the makefile for another iwn firmware mod after verifying it > was the same rev as the other 6xxx firmwares. > > Here's the MD5 of the firmware module: > # md5 iwn6005fw.ko > MD5 (iwn6005fw.ko) = 77f363e5b45d2886d3bf3cdfef728529 > > Here's the sha256: > # sha256 iwn6005fw.ko > SHA256 (iwn6005fw.ko) = > 7f1138ebed7d586f7fe20a598bc06fb373998c6ad6469170b48927525f09f2ba > > > This is from -STABLE as of 6/8/2011: > FreeBSD redacted 8.2-STABLE FreeBSD 8.2-STABLE #0: Wed Jun 8 23:58:25 PDT > 2011 bifrost@redacted:/usr/src/sys/amd64/compile/GENERIC amd64 > > (yes, my laptop is called redacted heheh) > > I tried checking out the drivers from head, but they won't build on > -current so I'm not sure what my next options are to getting this on > -stable. > > Any help would be appreciated. > > -Tom > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org" >help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201106140924.57943.bschmidt>