Date: Tue, 20 May 2025 17:51:47 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: dougm@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #26432 - Failure Message-ID: <2043461219.837.1747763507503@jenkins.ci.freebsd.org> In-Reply-To: <1095726585.815.1747741958231@jenkins.ci.freebsd.org> References: <1095726585.815.1747741958231@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-main-amd64-test - Build #26432 (0f941203ac513f5ed3cf30038ac9e7a062acf1b7) - Failure Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26432/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26432/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26432/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 0f941203ac513f5ed3cf30038ac9e7a062acf1b7 by dougm: vm_page: drop mpred from grab_valid_iter() The end of the build log: [...truncated 4.51 KiB...] + IMG_NAME=disk-test.img + JOB_DIR=freebsd-ci/jobs/FreeBSD-main-amd64-test + dirname freebsd-ci/scripts/test/run-tests.sh + TEST_BASE=freebsd-ci/scripts/test + TIMEOUT_MS=21600000 + TIMEOUT=21600 + TIMEOUT_EXPECT=21540 + TIMEOUT_VM=21420 + : 2 + : 8192m + EXTRA_DISK_NUM=5 + BHYVE_EXTRA_DISK_PARAM='' + METADIR=meta + METAOUTDIR=meta-out + fetch https://artifact.ci.freebsd.org/snapshot/main/0f941203ac513f5ed3cf30038ac9e7a062acf1b7/amd64/amd64/disk-test.img.zst disk-test.img.zst 1114 MB 101 MBps 11s + zstd --rm -fd disk-test.img.zst + truncate -s 128m disk-cam + BHYVE_EXTRA_DISK_PARAM=' -s 4:0,ahci-hd,disk-cam' + jot 5 + truncate -s 128m disk1 + BHYVE_EXTRA_DISK_PARAM=' -s 4:0,ahci-hd,disk-cam -s 5:0,virtio-blk,disk1' + truncate -s 128m disk2 + BHYVE_EXTRA_DISK_PARAM=' -s 4:0,ahci-hd,disk-cam -s 5:0,virtio-blk,disk1 -s 6:0,virtio-blk,disk2' + truncate -s 128m disk3 + BHYVE_EXTRA_DISK_PARAM=' -s 4:0,ahci-hd,disk-cam -s 5:0,virtio-blk,disk1 -s 6:0,virtio-blk,disk2 -s 7:0,virtio-blk,disk3' + truncate -s 128m disk4 + BHYVE_EXTRA_DISK_PARAM=' -s 4:0,ahci-hd,disk-cam -s 5:0,virtio-blk,disk1 -s 6:0,virtio-blk,disk2 -s 7:0,virtio-blk,disk3 -s 8:0,virtio-blk,disk4' + truncate -s 128m disk5 + BHYVE_EXTRA_DISK_PARAM=' -s 4:0,ahci-hd,disk-cam -s 5:0,virtio-blk,disk1 -s 6:0,virtio-blk,disk2 -s 7:0,virtio-blk,disk3 -s 8:0,virtio-blk,disk4 -s 9:0,virtio-blk,disk5' + rm -fr meta + mkdir meta + cp -R freebsd-ci/jobs/FreeBSD-main-amd64-test/meta/ meta/ + cp freebsd-ci/scripts/test/subr/disable-dtrace-tests.sh meta/ + cp freebsd-ci/scripts/test/subr/disable-zfs-tests.sh meta/ + cp freebsd-ci/scripts/test/subr/disable-notyet-tests.sh meta/ + cp freebsd-ci/scripts/test/subr/run-kyua.sh meta/ + touch meta/auto-shutdown + sh -ex freebsd-ci/scripts/test/create-meta.sh + rm -f meta.tar + truncate -s 512M meta.tar + tar rvf meta.tar -C meta . a . a ./run.sh a ./disable-dtrace-tests.sh a ./run-kyua.sh a ./disable-zfs-tests.sh a ./auto-shutdown a ./disable-notyet-tests.sh + echo main + sed -e 's,.*-,,' + FBSD_BRANCH_SHORT=main + TEST_VM_NAME=testvm-main-amd64-26432 + [ '' '=' 1 ] + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26432' --destroy vm_open: testvm-main-amd64-26432 could not be opened: No such file or directory + true + sudo /usr/sbin/bhyveload -c stdio -m 8192m -d disk-test.img testvm-main-amd64-26432 Consoles: userboot FreeBSD/amd64 User boot lua, Revision 3.0 (Mon Apr 7 16:14:49 UTC 2025 root@build-15.freebsd.org) |/-\|Loading /boot/defaults/loader.conf Loading /boot/defaults/loader.conf Loading /boot/device.hints /Loading /boot/loader.conf Loading /boot/loader.conf.local -\c|/[H[J[9;42H [31m``` [31;1m`[31m[10;42H s` `.....---...[31;1m....--.``` -/[31m[11;42H +o .--` [31;1m/y:` +.[31m[12;42H yo`:. [31;1m:o `+-[31m[13;42H y/ [31;1m-/` -o/[31m[14;42H .- [31;1m::/sy+:.[31m[15;42H / [31;1m`-- /[31m[16;42H `: [31;1m:`[31m[17;42H `: [31;1m:`[31m[18;42H / [31;1m/[31m[19;42H .- [31;1m-.[31m[20;42H -- [31;1m-.[31m[21;42H `:` [31;1m`:`[22;42H [31;1m.-- `--.[23;42H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_| |_| \___|\___||____/|_____/|_____/ [9;2H+[23;2H+[9;41H+[23;41H+[9;3H--------------------------------------[23;3H--------------------------------------[10;2H|[10;41H|[11;2H|[11;41H|[12;2H|[12;41H|[13;2H|[13;41H|[14;2H|[14;41H|[15;2H|[15;41H|[16;2H|[16;41H|[17;2H|[17;41H|[18;2H|[18;41H|[19;2H|[19;41H|[20;2H|[20;41H|[21;2H|[21;41H|[22;2H|[22;41H|[9;11H Welcome to FreeBSD [11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Serial[16;5H[17;5HKernel:[18;5H-\|/-\|/-\|6. [32mkernel[39m (1 of 1)[19;5H[20;5HOptions:[21;5H7. Boot [1mO[22mptions[22;5H[25;1H[24;4HAutoboot in 1 seconds. [Space] to pause [25;1H[24;4HAutoboot in 0 seconds. [Space] to pause [25;1HLoading kernel... /-/boot/kernel/kernel text=0x18c008 \text=0xdfed38 |/-\|/-text=0x49a225 \|data=0x180+0xe80 data=0x1aecb0+0x451350 /0x8+0x1a7798-+0x8+0x1d3def\ Loading configured modules... can't find '/etc/hostid' |//boot/kernel/mac_bsdextended.ko size 0x61d8 at 0x237c000 -/boot/entropy size=0x1000 + set +e + expect -c $'set timeout 21540; \t\tspawn sudo /usr/bin/timeout -k 60 21420 /usr/sbin/bhyve \t\t-c 2 -m 8192m -A -H -P \t\t-s 0:0,hostbridge \t\t-s 1:0,lpc \t\t-s 2:0,virtio-blk,disk-test.img \t\t-s 3:0,virtio-blk,meta.tar \t\t -s 4:0,ahci-hd,disk-cam -s 5:0,virtio-blk,disk1 -s 6:0,virtio-blk,disk2 -s 7:0,virtio-blk,disk3 -s 8:0,virtio-blk,disk4 -s 9:0,virtio-blk,disk5 \t\t-l com1,stdio \t\ttestvm-main-amd64-26432; \t\texpect { eof }' spawn sudo /usr/bin/timeout -k 60 21420 /usr/sbin/bhyve -c 2 -m 8192m -A -H -P -s 0:0,hostbridge -s 1:0,lpc -s 2:0,virtio-blk,disk-test.img -s 3:0,virtio-blk,meta.tar -s 4:0,ahci-hd,disk-cam -s 5:0,virtio-blk,disk1 -s 6:0,virtio-blk,disk2 -s 7:0,virtio-blk,disk3 -s 8:0,virtio-blk,disk4 -s 9:0,virtio-blk,disk5 -l com1,stdio testvm-main-amd64-26432 GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb ---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-CURRENT #0 0f941203ac51: Tue May 20 08:01:08 UTC 2025 root@FreeBSD-main-amd64-build.jail.ci.FreeBSD.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) WARNING: WITNESS option enabled, expect reduced performance. VT: init without driver. CPU: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz (3067.30-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2 Features=0x9f83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS,HTT,PBE> Features2=0x829e6217<SSE3,PCLMULQDQ,DTES64,DS_CPL,SSSE3,CX16,xTPR,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI,HV> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant Hypervisor: Origin = "bhyve bhyve " real memory = 9663676416 (9216 MB) avail memory = 8257433600 (7874 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <BHYVE BVAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) random: unblocking device. Security policy loaded: TrustedBSD MAC/BSD Extended (mac_bsdextended) ioapic0 <Version 1.1> irqs 0-31 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 smbios0: <System Management BIOS> at iomem 0xf1000-0xf101e smbios0: Entry point: v2.1 (32-bit), Version: 2.6, BCD Revision: 2.6 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <BHYVE BVXSDT > acpi0: Power Button (fixed) atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 16777216 Hz quality 950 Event timer "HPET" frequency 16777216 Hz quality 550 Event timer "HPET1" frequency 16777216 Hz quality 450 Event timer "HPET2" frequency 16777216 Hz quality 450 Event timer "HPET3" frequency 16777216 Hz quality 450 Event timer "HPET4" frequency 16777216 Hz quality 450 Event timer "HPET5" frequency 16777216 Hz quality 450 Event timer "HPET6" frequency 16777216 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 virtio_pci0: <VirtIO PCI (legacy) Block adapter> port 0x2000-0x207f mem 0xc0000000-0xc0001fff irq 16 at device 2.0 on pci0 vtblk0: <VirtIO Block Adapter> on virtio_pci0 vtblk0: 9216MB (18874557 512 byte sectors) virtio_pci1: <VirtIO PCI (legacy) Block adapter> port 0x2080-0x20ff mem 0xc0002000-0xc0003fff irq 17 at device 3.0 on pci0 vtblk1: <VirtIO Block Adapter> on virtio_pci1 vtblk1: 512MB (1048576 512 byte sectors) ahci0: <Intel ICH8 AHCI SATA controller> mem 0xc0004000-0xc0005fff irq 18 at device 4.0 on pci0 ahci0: AHCI v1.30 with 32 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 virtio_pci2: <VirtIO PCI (legacy) Block adapter> port 0x2100-0x217f mem 0xc0006000-0xc0007fff irq 19 at device 5.0 on pci0 vtblk2: <VirtIO Block Adapter> on virtio_pci2 vtblk2: 128MB (262144 512 byte sectors) virtio_pci3: <VirtIO PCI (legacy) Block adapter> port 0x2180-0x21ff mem 0xc0008000-0xc0009fff irq 20 at device 6.0 on pci0 vtblk3: <VirtIO Block Adapter> on virtio_pci3 vtblk3: 128MB (262144 512 byte sectors) virtio_pci4: <VirtIO PCI (legacy) Block adapter> port 0x2200-0x227f mem 0xc000a000-0xc000bfff irq 21 at device 7.0 on pci0 vtblk4: <VirtIO Block Adapter> on virtio_pci4 vtblk4: 128MB (262144 512 byte sectors) virtio_pci5: <VirtIO PCI (legacy) Block adapter> port 0x2280-0x22ff mem 0xc000c000-0xc000dfff irq 22 at device 8.0 on pci0 vtblk5: <VirtIO Block Adapter> on virtio_pci5 vtblk5: 128MB (262144 512 byte sectors) virtio_pci6: <VirtIO PCI (legacy) Block adapter> port 0x2300-0x237f mem 0xc000e000-0xc000ffff irq 23 at device 9.0 on pci0 vtblk6: <VirtIO Block Adapter> on virtio_pci6 vtblk6: 128MB (262144 512 byte sectors) vmgenc0: <VM Generation Counter> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) Unhandled ps2 mouse command 0xe1 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. psm0: model Generic PS/2 mouse, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart2: <16550 or compatible> port 0x3e8-0x3ef irq 4 on acpi0 uart3: <16550 or compatible> port 0x2e8-0x2ef irq 3 on acpi0 vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0 Timecounter "TSC-low" frequency 1533473593 Hz quality 1000 Timecounters tick every 10.000 msec usb_needs_explore_all: no devclass Trying to mount root from ufs:/dev/gpt/rootfs [rw]... WARNING: WITNESS option enabled, expect reduced performance. ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <BHYVE SATA DISK 001> ACS-2 ATA SATA 3.x device ada0: Serial Number BHYVE-AC61-4EA8-6E92 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 128MB (262144 512 byte sectors) panic: vm_page_assert_xbusied: page 0xfffff8010260c070 not exclusive busy @ /usr/src/sys/vm/vm_pager.c:299 cpuid = 1 time = 1747742030 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008de4a710 vpanic() at vpanic+0x136/frame 0xfffffe008de4a840 panic() at panic+0x43/frame 0xfffffe008de4a8a0 vm_pager_assert_in() at vm_pager_assert_in+0x191/frame 0xfffffe008de4a8e0 vm_pager_get_pages() at vm_pager_get_pages+0x3a/frame 0xfffffe008de4a930 vm_page_grab_valid_iter() at vm_page_grab_valid_iter+0x3e1/frame 0xfffffe008de4aa40 vm_page_grab_valid_unlocked() at vm_page_grab_valid_unlocked+0xe4/frame 0xfffffe008de4aaa0 exec_map_first_page() at exec_map_first_page+0x9d/frame 0xfffffe008de4aad0 kern_execve() at kern_execve+0x52f/frame 0xfffffe008de4ae60 start_init() at start_init+0x1c6/frame 0xfffffe008de4aef0 fork_exit() at fork_exit+0x82/frame 0xfffffe008de4af30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008de4af30 --- trap 0, rip = 0, rsp = 0, rbp = 0 --- KDB: enter: panic [ thread pid 1 tid 100002 ] Stopped at kdb_enter+0x33: movq $0,0x1232382(%rip) db> + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26432' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./run.sh x ./disable-dtrace-tests.sh x ./run-kyua.sh x ./disable-zfs-tests.sh x ./auto-shutdown x ./disable-notyet-tests.sh + rm -f test-report.txt test-report.xml + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins12651565792666466414.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '0f941203ac513f5ed3cf30038ac9e7a062acf1b7', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../0f941203ac513f5ed3cf30038ac9e7a062acf1b7/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2043461219.837.1747763507503>