Date: Wed, 21 Sep 2005 17:06:47 +0200 From: "Fretz Marco" <Marco.Fretz@kyberna.com> To: "Rasmus Fauske" <rasmus@postboks.org>, <freebsd-isp@freebsd.org> Subject: AW: AW: AW: HP DL140 with SATA Message-ID: <B193879E1E773E4EAE9DE959C21F459EE1A795@srv06.intern.kyberna.com>
next in thread | raw e-mail | index | archive | help
Hello news: no chance to get the SATA ICH5 run on 6.0 or 5.4. i got only = ATA_IDENTIFY time outs I tried freebsd 4.11 > no problem Why this? Anyone any idea? thanks -----Urspr=FCngliche Nachricht----- Von: Rasmus Fauske [mailto:rasmus@postboks.org]=20 Gesendet: Mittwoch, 21. September 2005 13:24 An: Fretz Marco Betreff: Re: AW: AW: HP DL140 with SATA It was working when I tried it, but I only used it fo some minutes. Fretz Marco wrote: >Hi > >Thanks. Ok but 6.0 isnt stable yet. So i need to run 5.4. you'r sure, = you have a DL140 G2 and SATA controller was working with free 5.4?=20 > >-----Urspr=FCngliche Nachricht----- >Von: Rasmus Fauske [mailto:rasmus@postboks.org]=20 >Gesendet: Mittwoch, 21. September 2005 13:12 >An: Fretz Marco >Betreff: Re: AW: HP DL140 with SATA >Wichtigkeit: Hoch > > =20 > >>Hello >> >>Thanks for your help. I had a dl140 g2 here some days ago. I booted = from a >>5.4-release cd and got no support for this controller. May you send me >>some kernel output? Dmesg? >> =20 >> > >This is the output for 6.0, I don't have for 5.4 any more as this box = is >in production now > >Copyright (c) 1992-2005 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. >FreeBSD 6.0-BETA5 #3: Sun Sep 18 08:22:37 CEST 2005 > admin@web.dialecta.no:/usr/obj/usr/src/sys/WEB >Timecounter "i8254" frequency 1193182 Hz quality 0 >CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz K8-class CPU) > Origin =3D "GenuineIntel" Id =3D 0xf41 Stepping =3D 1 > = Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=3D0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> > AMD Features=3D0x20100800<SYSCALL,NX,LM> > Hyperthreading: 2 logical CPUs >real memory =3D 1073152000 (1023 MB) >avail memory =3D 1027723264 (980 MB) >ACPI APIC Table: <PTLTD APIC > >FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 >ioapic0 <Version 2.0> irqs 0-23 on motherboard >ioapic1 <Version 2.0> irqs 24-47 on motherboard >ioapic2 <Version 2.0> irqs 48-71 on motherboard >acpi0: <PTLTD RSDT> on motherboard >acpi0: Power Button (fixed) >pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0 >pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0 >pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0 >pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0 >pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 >pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 >pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 >pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0 >Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 >cpu0: <ACPI CPU> on acpi0 >acpi_throttle0: <ACPI CPU Throttling> on cpu0 >cpu1: <ACPI CPU> on acpi0 >acpi_throttle1: <ACPI CPU Throttling> on cpu1 >acpi_throttle1: failed to attach P_CNT >device_attach: acpi_throttle1 attach returned 6 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >pci0: <unknown> at device 0.1 (no driver attached) >pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 >pci2: <ACPI PCI bus> on pcib2 >bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem >0xdd100000-0xdd10ffff irq 16 at device 0.0 on pci2 >miibus0: <MII bus> on bge0 >brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 >brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, >1000baseTX-FDX, auto >bge0: Ethernet address: 00:14:38:a7:12:96 >pcib3: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0 >pci3: <ACPI PCI bus> on pcib3 >bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem >0xdd200000-0xdd20ffff irq 16 at device 0.0 on pci3 >miibus1: <MII bus> on bge1 >brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1 >brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, >1000baseTX-FDX, auto >bge1: Ethernet address: 00:14:38:a7:12:97 >pcib4: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0 >pci4: <ACPI PCI bus> on pcib4 >pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4 >pci5: <ACPI PCI bus> on pcib5 >pci4: <base peripheral, interrupt controller> at device 0.1 (no driver >attached) >pcib6: <ACPI PCI-PCI bridge> at device 0.2 on pci4 >pci6: <ACPI PCI bus> on pcib6 >pci4: <base peripheral, interrupt controller> at device 0.3 (no driver >attached) >pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >pci7: <ACPI PCI bus> on pcib7 >pci7: <display, VGA> at device 1.0 (no driver attached) >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <Intel ICH5 SATA150 controller> port >0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1430-0x143f at device 31.2 on = pci0 >atapci0: failed to enable memory mapping! >ata0: <ATA channel 0> on atapci0 >ata1: <ATA channel 1> on atapci0 >pci0: <serial bus, SMBus> at device 31.3 (no driver attached) >acpi_button0: <Power Button> on acpi0 >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xdc000-0xdffff on = isa0 >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=3D0x300> >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 >Timecounters tick every 1.000 msec >acd0: CDROM <CD-224E/9.9A> at ata0-master PIO4 >ad2: 76319MB <Maxtor 6Y080M0 YAR511W0> at ata1-master SATA150 >GEOM_MIRROR: Device gm0 created (id=3D2900722631). >GEOM_MIRROR: Device gm0: provider ad2 detected. >ad3: 76319MB <Maxtor 6Y080M0 YAR511W0> at ata1-slave SATA150 >GEOM_MIRROR: Device gm0: provider ad3 detected. >GEOM_MIRROR: Device gm0: provider ad3 activated. >GEOM_MIRROR: Device gm0: provider mirror/gm0 launched. >GEOM_MIRROR: Device gm0: rebuilding provider ad2. >SMP: AP CPU #1 Launched! >Trying to mount root from ufs:/dev/mirror/gm0s1a > > =20 > >>Thanks >> >>Kind regards >>marco >> >>-----Urspr=FCngliche Nachricht----- >>Von: owner-freebsd-isp@freebsd.org = [mailto:owner-freebsd-isp@freebsd.org] >>Im Auftrag von Rasmus Fauske >>Gesendet: Donnerstag, 15. September 2005 14:14 >>An: freebsd-isp@freebsd.org >>Betreff: Re: HP DL140 with SATA >> >>Fretz Marco wrote: >> >> =20 >> >>>Hi there >>> >>>We are an ips and looking for some pizza box server from HP. Do you = got >>>any experiences with the HP DL140 with SATA Raid? Is this Controller >>>supported in Free 5.4? >>> >>> >>> =20 >>> >>It is a normal SATA non-raid kontroller, I am running a dl140 g2 with = a >>genom mirror. working great with 5.4 and 6.0 and 6.0/amd64 >> >>-- >>Rasmus Fauske >>_______________________________________________ >>freebsd-isp@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-isp >>To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org" >> >> =20 >> > > > =20 >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B193879E1E773E4EAE9DE959C21F459EE1A795>