Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 17 May 2005 18:32:12 +0200
From:      Jeremie Le Hen <jeremie@le-hen.org>
To:        freebsd-current@FreeBSD.org
Subject:   ACPI errors with recent laptop
Message-ID:  <20050517163212.GG14297@obiwan.tataz.chchile.org>

next in thread | raw e-mail | index | archive | help

--+HP7ph2BbKc20aGI
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

I run a -CURRENT kernel from yesterday on my very recent laptop (Acer
Extensa 4100), but it has a few problems with ACPI.  In particular,
I have some weird error at boot time or when I run "sysctl hw.acpi"
and I can't get the screen back from S3 state.

I attached the boot -v output with this mail.  Please feel free to
contact me to have more informations.

Best regards,
-- 
Jeremie Le Hen
< jeremie at le-hen dot org >< ttz at chchile dot org >

--+HP7ph2BbKc20aGI
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="JARJARBINKS.dmesg"

ACPI set debug layer 'ACPI_ALL_COMPONENTS ACPI_ALL_DRIVERS' level 'ACPI_LV_VERBOSE'
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #127: Tue May 17 20:22:25 CEST 2005
    root@coyote.tech.sitadelle.com:/usr/src/sys/i386/compile/JARJARBINKS
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08e7000.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc08e720c.
Calibrating clock(s) ... i8254 clock: 1193158 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1729009885 Hz
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 1072168960 (1022 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000003ec3efff, 1040293888 bytes (253978 pages)
avail memory = 1040281600 (992 MB)
Table 'FACP' at 0x3fe88e8a
Table 'APIC' at 0x3fe88efe
MADT: Found table at 0x3fe88efe
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <INTEL  ALVISO  >
bios32: Found BIOS32 Service Directory header at 0xc00f69b0
bios32: Entry = 0xfd560 (c00fd560)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd560+0x25e
pnpbios: Found PnP BIOS data at 0xc00f6a20
pnpbios: Entry = f0000:b1b6  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 2, Interrupt 24 at 0xfec20000
ioapic1: Changing APIC ID to 2
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
ioapic1: intpin 4 -> PCI IRQ 28 (level, low)
ioapic1: intpin 5 -> PCI IRQ 29 (level, low)
ioapic1: intpin 6 -> PCI IRQ 30 (level, low)
ioapic1: intpin 7 -> PCI IRQ 31 (level, low)
ioapic1: intpin 8 -> PCI IRQ 32 (level, low)
ioapic1: intpin 9 -> PCI IRQ 33 (level, low)
ioapic1: intpin 10 -> PCI IRQ 34 (level, low)
ioapic1: intpin 11 -> PCI IRQ 35 (level, low)
ioapic1: intpin 12 -> PCI IRQ 36 (level, low)
ioapic1: intpin 13 -> PCI IRQ 37 (level, low)
ioapic1: intpin 14 -> PCI IRQ 38 (level, low)
ioapic1: intpin 15 -> PCI IRQ 39 (level, low)
ioapic1: intpin 16 -> PCI IRQ 40 (level, low)
ioapic1: intpin 17 -> PCI IRQ 41 (level, low)
ioapic1: intpin 18 -> PCI IRQ 42 (level, low)
ioapic1: intpin 19 -> PCI IRQ 43 (level, low)
ioapic1: intpin 20 -> PCI IRQ 44 (level, low)
ioapic1: intpin 21 -> PCI IRQ 45 (level, low)
ioapic1: intpin 22 -> PCI IRQ 46 (level, low)
ioapic1: intpin 23 -> PCI IRQ 47 (level, low)
ioapic1: intpin 24 -> PCI IRQ 48 (level, low)
ioapic1: intpin 25 -> PCI IRQ 49 (level, low)
ioapic1: intpin 26 -> PCI IRQ 50 (level, low)
ioapic1: intpin 27 -> PCI IRQ 51 (level, low)
ioapic1: intpin 28 -> PCI IRQ 52 (level, low)
ioapic1: intpin 29 -> PCI IRQ 53 (level, low)
ioapic1: intpin 30 -> PCI IRQ 54 (level, low)
ioapic1: intpin 31 -> PCI IRQ 55 (level, low)
ioapic1: intpin 32 -> PCI IRQ 56 (level, low)
ioapic1: intpin 33 -> PCI IRQ 57 (level, low)
ioapic1: intpin 34 -> PCI IRQ 58 (level, low)
ioapic1: intpin 35 -> PCI IRQ 59 (level, low)
ioapic1: intpin 36 -> PCI IRQ 60 (level, low)
ioapic1: intpin 37 -> PCI IRQ 61 (level, low)
ioapic1: intpin 38 -> PCI IRQ 62 (level, low)
ioapic1: intpin 39 -> PCI IRQ 63 (level, low)
ioapic1: intpin 40 -> PCI IRQ 64 (level, low)
ioapic1: intpin 41 -> PCI IRQ 65 (level, low)
ioapic1: intpin 42 -> PCI IRQ 66 (level, low)
ioapic1: intpin 43 -> PCI IRQ 67 (level, low)
ioapic1: intpin 44 -> PCI IRQ 68 (level, low)
ioapic1: intpin 45 -> PCI IRQ 69 (level, low)
ioapic1: intpin 46 -> PCI IRQ 70 (level, low)
ioapic1: intpin 47 -> PCI IRQ 71 (level, low)
ioapic1: intpin 48 -> PCI IRQ 72 (level, low)
ioapic1: intpin 49 -> PCI IRQ 73 (level, low)
ioapic1: intpin 50 -> PCI IRQ 74 (level, low)
ioapic1: intpin 51 -> PCI IRQ 75 (level, low)
ioapic1: intpin 52 -> PCI IRQ 76 (level, low)
ioapic1: intpin 53 -> PCI IRQ 77 (level, low)
ioapic1: intpin 54 -> PCI IRQ 78 (level, low)
ioapic1: intpin 55 -> PCI IRQ 79 (level, low)
ioapic1: intpin 56 -> PCI IRQ 80 (level, low)
ioapic1: intpin 57 -> PCI IRQ 81 (level, low)
ioapic1: intpin 58 -> PCI IRQ 82 (level, low)
ioapic1: intpin 59 -> PCI IRQ 83 (level, low)
ioapic1: intpin 60 -> PCI IRQ 84 (level, low)
ioapic1: intpin 61 -> PCI IRQ 85 (level, low)
ioapic1: intpin 62 -> PCI IRQ 86 (level, low)
ioapic1: intpin 63 -> PCI IRQ 87 (level, low)
ioapic1: intpin 64 -> PCI IRQ 88 (level, low)
ioapic1: intpin 65 -> PCI IRQ 89 (level, low)
ioapic1: intpin 66 -> PCI IRQ 90 (level, low)
ioapic1: intpin 67 -> PCI IRQ 91 (level, low)
ioapic1: intpin 68 -> PCI IRQ 92 (level, low)
ioapic1: intpin 69 -> PCI IRQ 93 (level, low)
ioapic1: intpin 70 -> PCI IRQ 94 (level, low)
ioapic1: intpin 71 -> PCI IRQ 95 (level, low)
ioapic1: intpin 72 -> PCI IRQ 96 (level, low)
ioapic1: intpin 73 -> PCI IRQ 97 (level, low)
ioapic1: intpin 74 -> PCI IRQ 98 (level, low)
ioapic1: intpin 75 -> PCI IRQ 99 (level, low)
ioapic1: intpin 76 -> PCI IRQ 100 (level, low)
ioapic1: intpin 77 -> PCI IRQ 101 (level, low)
ioapic1: intpin 78 -> PCI IRQ 102 (level, low)
ioapic1: intpin 79 -> PCI IRQ 103 (level, low)
ioapic1: intpin 80 -> PCI IRQ 104 (level, low)
ioapic1: intpin 81 -> PCI IRQ 105 (level, low)
ioapic1: intpin 82 -> PCI IRQ 106 (level, low)
ioapic1: intpin 83 -> PCI IRQ 107 (level, low)
ioapic1: intpin 84 -> PCI IRQ 108 (level, low)
ioapic1: intpin 85 -> PCI IRQ 109 (level, low)
ioapic1: intpin 86 -> PCI IRQ 110 (level, low)
ioapic1: intpin 87 -> PCI IRQ 111 (level, low)
ioapic1: intpin 88 -> PCI IRQ 112 (level, low)
ioapic1: intpin 89 -> PCI IRQ 113 (level, low)
ioapic1: intpin 90 -> PCI IRQ 114 (level, low)
ioapic1: intpin 91 -> PCI IRQ 115 (level, low)
ioapic1: intpin 92 -> PCI IRQ 116 (level, low)
ioapic1: intpin 93 -> PCI IRQ 117 (level, low)
ioapic1: intpin 94 -> PCI IRQ 118 (level, low)
ioapic1: intpin 95 -> PCI IRQ 119 (level, low)
ioapic1: intpin 96 -> PCI IRQ 120 (level, low)
ioapic1: intpin 97 -> PCI IRQ 121 (level, low)
ioapic1: intpin 98 -> PCI IRQ 122 (level, low)
ioapic1: intpin 99 -> PCI IRQ 123 (level, low)
ioapic1: intpin 100 -> PCI IRQ 124 (level, low)
ioapic1: intpin 101 -> PCI IRQ 125 (level, low)
ioapic1: intpin 102 -> PCI IRQ 126 (level, low)
ioapic1: intpin 103 -> PCI IRQ 127 (level, low)
ioapic1: intpin 104 -> PCI IRQ 128 (level, low)
ioapic1: intpin 105 -> PCI IRQ 129 (level, low)
ioapic1: intpin 106 -> PCI IRQ 130 (level, low)
ioapic1: intpin 107 -> PCI IRQ 131 (level, low)
ioapic1: intpin 108 -> PCI IRQ 132 (level, low)
ioapic1: intpin 109 -> PCI IRQ 133 (level, low)
ioapic1: intpin 110 -> PCI IRQ 134 (level, low)
ioapic1: intpin 111 -> PCI IRQ 135 (level, low)
ioapic1: intpin 112 -> PCI IRQ 136 (level, low)
ioapic1: intpin 113 -> PCI IRQ 137 (level, low)
ioapic1: intpin 114 -> PCI IRQ 138 (level, low)
ioapic1: intpin 115 -> PCI IRQ 139 (level, low)
ioapic1: intpin 116 -> PCI IRQ 140 (level, low)
ioapic1: intpin 117 -> PCI IRQ 141 (level, low)
ioapic1: intpin 118 -> PCI IRQ 142 (level, low)
ioapic1: intpin 119 -> PCI IRQ 143 (level, low)
ioapic1: intpin 120 -> PCI IRQ 144 (level, low)
ioapic1: intpin 121 -> PCI IRQ 145 (level, low)
ioapic1: intpin 122 -> PCI IRQ 146 (level, low)
ioapic1: intpin 123 -> PCI IRQ 147 (level, low)
ioapic1: intpin 124 -> PCI IRQ 148 (level, low)
ioapic1: intpin 125 -> PCI IRQ 149 (level, low)
ioapic1: intpin 126 -> PCI IRQ 150 (level, low)
ioapic1: intpin 127 -> PCI IRQ 151 (level, low)
ioapic1: intpin 128 -> PCI IRQ 152 (level, low)
ioapic1: intpin 129 -> PCI IRQ 153 (level, low)
ioapic1: intpin 130 -> PCI IRQ 154 (level, low)
ioapic1: intpin 131 -> PCI IRQ 155 (level, low)
ioapic1: intpin 132 -> PCI IRQ 156 (level, low)
ioapic1: intpin 133 -> PCI IRQ 157 (level, low)
ioapic1: intpin 134 -> PCI IRQ 158 (level, low)
ioapic1: intpin 135 -> PCI IRQ 159 (level, low)
ioapic1: intpin 136 -> PCI IRQ 160 (level, low)
ioapic1: intpin 137 -> PCI IRQ 161 (level, low)
ioapic1: intpin 138 -> PCI IRQ 162 (level, low)
ioapic1: intpin 139 -> PCI IRQ 163 (level, low)
ioapic1: intpin 140 -> PCI IRQ 164 (level, low)
ioapic1: intpin 141 -> PCI IRQ 165 (level, low)
ioapic1: intpin 142 -> PCI IRQ 166 (level, low)
ioapic1: intpin 143 -> PCI IRQ 167 (level, low)
ioapic1: intpin 144 -> PCI IRQ 168 (level, low)
ioapic1: intpin 145 -> PCI IRQ 169 (level, low)
ioapic1: intpin 146 -> PCI IRQ 170 (level, low)
ioapic1: intpin 147 -> PCI IRQ 171 (level, low)
ioapic1: intpin 148 -> PCI IRQ 172 (level, low)
ioapic1: intpin 149 -> PCI IRQ 173 (level, low)
ioapic1: intpin 150 -> PCI IRQ 174 (level, low)
ioapic1: intpin 151 -> PCI IRQ 175 (level, low)
ioapic1: intpin 152 -> PCI IRQ 176 (level, low)
ioapic1: intpin 153 -> PCI IRQ 177 (level, low)
ioapic1: intpin 154 -> PCI IRQ 178 (level, low)
ioapic1: intpin 155 -> PCI IRQ 179 (level, low)
ioapic1: intpin 156 -> PCI IRQ 180 (level, low)
ioapic1: intpin 157 -> PCI IRQ 181 (level, low)
ioapic1: intpin 158 -> PCI IRQ 182 (level, low)
ioapic1: intpin 159 -> PCI IRQ 183 (level, low)
ioapic1: intpin 160 -> PCI IRQ 184 (level, low)
ioapic1: intpin 161 -> PCI IRQ 185 (level, low)
ioapic1: intpin 162 -> PCI IRQ 186 (level, low)
ioapic1: intpin 163 -> PCI IRQ 187 (level, low)
ioapic1: intpin 164 -> PCI IRQ 188 (level, low)
ioapic1: intpin 165 -> PCI IRQ 189 (level, low)
ioapic1: intpin 166 -> PCI IRQ 190 (level, low)
ioapic1: intpin 167 -> PCI IRQ 191 (level, low)
ioapic1: intpin 168 -> PCI IRQ 192 (level, low)
ioapic1: intpin 169 -> PCI IRQ 193 (level, low)
ioapic1: intpin 170 -> PCI IRQ 194 (level, low)
ioapic1: intpin 171 -> PCI IRQ 195 (level, low)
ioapic1: intpin 172 -> PCI IRQ 196 (level, low)
ioapic1: intpin 173 -> PCI IRQ 197 (level, low)
ioapic1: intpin 174 -> PCI IRQ 198 (level, low)
ioapic1: intpin 175 -> PCI IRQ 199 (level, low)
ioapic1: intpin 176 -> PCI IRQ 200 (level, low)
ioapic1: intpin 177 -> PCI IRQ 201 (level, low)
ioapic1: intpin 178 -> PCI IRQ 202 (level, low)
ioapic1: intpin 179 -> PCI IRQ 203 (level, low)
ioapic1: intpin 180 -> PCI IRQ 204 (level, low)
ioapic1: intpin 181 -> PCI IRQ 205 (level, low)
ioapic1: intpin 182 -> PCI IRQ 206 (level, low)
ioapic1: intpin 183 -> PCI IRQ 207 (level, low)
ioapic1: intpin 184 -> PCI IRQ 208 (level, low)
ioapic1: intpin 185 -> PCI IRQ 209 (level, low)
ioapic1: intpin 186 -> PCI IRQ 210 (level, low)
ioapic1: intpin 187 -> PCI IRQ 211 (level, low)
ioapic1: intpin 188 -> PCI IRQ 212 (level, low)
ioapic1: intpin 189 -> PCI IRQ 213 (level, low)
ioapic1: intpin 190 -> PCI IRQ 214 (level, low)
ioapic1: intpin 191 -> PCI IRQ 215 (level, low)
ioapic1: intpin 192 -> PCI IRQ 216 (level, low)
ioapic1: intpin 193 -> PCI IRQ 217 (level, low)
ioapic1: intpin 194 -> PCI IRQ 218 (level, low)
ioapic1: intpin 195 -> PCI IRQ 219 (level, low)
ioapic1: intpin 196 -> PCI IRQ 220 (level, low)
ioapic1: intpin 197 -> PCI IRQ 221 (level, low)
ioapic1: intpin 198 -> PCI IRQ 222 (level, low)
ioapic1: intpin 199 -> PCI IRQ 223 (level, low)
ioapic1: intpin 200 -> PCI IRQ 224 (level, low)
ioapic1: intpin 201 -> PCI IRQ 225 (level, low)
ioapic1: intpin 202 -> PCI IRQ 226 (level, low)
ioapic1: intpin 203 -> PCI IRQ 227 (level, low)
ioapic1: intpin 204 -> PCI IRQ 228 (level, low)
ioapic1: intpin 205 -> PCI IRQ 229 (level, low)
ioapic1: intpin 206 -> PCI IRQ 230 (level, low)
ioapic1: intpin 207 -> PCI IRQ 231 (level, low)
ioapic1: intpin 208 -> PCI IRQ 232 (level, low)
ioapic1: intpin 209 -> PCI IRQ 233 (level, low)
ioapic1: intpin 210 -> PCI IRQ 234 (level, low)
ioapic1: intpin 211 -> PCI IRQ 235 (level, low)
ioapic1: intpin 212 -> PCI IRQ 236 (level, low)
ioapic1: intpin 213 -> PCI IRQ 237 (level, low)
ioapic1: intpin 214 -> PCI IRQ 238 (level, low)
ioapic1: intpin 215 -> PCI IRQ 239 (level, low)
ioapic1: intpin 216 -> PCI IRQ 240 (level, low)
ioapic1: intpin 217 -> PCI IRQ 241 (level, low)
ioapic1: intpin 218 -> PCI IRQ 242 (level, low)
ioapic1: intpin 219 -> PCI IRQ 243 (level, low)
ioapic1: intpin 220 -> PCI IRQ 244 (level, low)
ioapic1: intpin 221 -> PCI IRQ 245 (level, low)
ioapic1: intpin 222 -> PCI IRQ 246 (level, low)
ioapic1: intpin 223 -> PCI IRQ 247 (level, low)
ioapic1: intpin 224 -> PCI IRQ 248 (level, low)
ioapic1: intpin 225 -> PCI IRQ 249 (level, low)
ioapic1: intpin 226 -> PCI IRQ 250 (level, low)
ioapic1: intpin 227 -> PCI IRQ 251 (level, low)
ioapic1: intpin 228 -> ExtINT (level, low)
ioapic1: intpin 229 -> NMI (level, low)
ioapic1: intpin 230 -> SMI (level, low)
ioapic1: intpin 232 -> ISA IRQ 0 (level, low)
ioapic1: intpin 233 -> ISA IRQ 1 (edge, high)
ioapic1: intpin 234 -> ISA IRQ 2 (edge, high)
ioapic1: intpin 235 -> ISA IRQ 3 (edge, high)
ioapic1: intpin 236 -> ISA IRQ 4 (edge, high)
ioapic1: intpin 237 -> ISA IRQ 5 (edge, high)
ioapic1: intpin 238 -> ISA IRQ 6 (edge, high)
ioapic1: intpin 239 -> ISA IRQ 7 (edge, high)
ioapic1: intpin 240 -> ISA IRQ 8 (edge, high)
ioapic1: intpin 241 -> ISA IRQ 9 (edge, high)
ioapic1: intpin 242 -> ISA IRQ 10 (edge, high)
ioapic1: intpin 243 -> ISA IRQ 11 (edge, high)
ioapic1: intpin 244 -> ISA IRQ 12 (edge, high)
ioapic1: intpin 245 -> ISA IRQ 13 (edge, high)
ioapic1: intpin 246 -> ISA IRQ 14 (edge, high)
ioapic1: intpin 247 -> ISA IRQ 15 (edge, high)
ioapic1: intpin 248 -> PCI IRQ 16 (level, low)
ioapic1: intpin 249 -> PCI IRQ 17 (level, low)
ioapic1: intpin 250 -> PCI IRQ 18 (level, low)
ioapic1: intpin 251 -> PCI IRQ 19 (level, low)
ioapic1: intpin 252 -> PCI IRQ 20 (level, low)
ioapic1: intpin 253 -> PCI IRQ 21 (level, low)
ioapic1: intpin 254 -> PCI IRQ 22 (level, low)
ioapic1: intpin 255 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 15.15> irqs 24-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
null: <null device, zero device>
nfslock: pseudo-device
io: <I/O>
random: <entropy source, Software, Yarrow>
VESA: information block
56 45 53 41 00 03 40 02 00 c0 01 00 00 00 44 00 
00 01 00 01 0a 09 88 01 00 c0 94 00 00 c0 4a 50 
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
VESA: 76 mode(s) found
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc0840c44 (1000044)
VESA: ATI ATOMBIOS
VESA: (C) 1988-2003, ATI Technologies Inc.  M26-P 01.00
mem: <memory>
Pentium Pro MTRR support enabled
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [MPSAFE]
  psargs-0438: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
SearchNode 0xc22ec3e8 StartNode 0xc22ec3e8 ReturnNode 0
  psargs-0438: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
SearchNode 0xc22ebd68 StartNode 0xc22ebd68 ReturnNode 0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80010010
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25908086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 2 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 28 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  1 3 4 5 6 7 10 12 14 15
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  1 3 4 5 6 7 10 12 14 15
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  1 3 4 5 6 7 11 12 14 15
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 10 12 14 15
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 11 12 14 15
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 11 12 14 15
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 10 12 14 15
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 11 12 14 15
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 11 12 14 15
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on acpi0
acpi_ec0: info: new max delay is 20 us
acpi_ec0: info: new max delay is 270 us
acpi_ec0: info: new max delay is 530 us
acpi_ec0: info: new max delay is 540 us
acpi_ec0: info: new max delay is 550 us
unknown: I/O range not supported
ACPI timer: 1/2 1/2 1/2 1/2 0/14155 1/2 1/2 1/2 1/2 1/2 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x2590, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2591, revid=0x03
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2660, revid=0x04
	bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x2662, revid=0x04
	bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2664, revid=0x04
	bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x2658, revid=0x04
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 00001800, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2659, revid=0x04
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type 4, range 32, base 00001820, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x265a, revid=0x04
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[20]: type 4, range 32, base 00001840, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x265b, revid=0x04
	bus=0, slot=29, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=10
	map[20]: type 4, range 32, base 00001860, size  5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found->	vendor=0x8086, dev=0x265c, revid=0x04
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base c8000000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2448, revid=0xd4
	bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x266e, revid=0x04
	bus=0, slot=30, func=2
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00001c00, size  8, enabled
	map[14]: type 4, range 32, base 00001880, size  6, enabled
	map[18]: type 1, range 32, base c8000800, size  9, enabled
	map[1c]: type 1, range 32, base c8000400, size  8, enabled
pcib0: matched entry for 0.30.INTA
pcib0: slot 30 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x266d, revid=0x04
	bus=0, slot=30, func=3
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00002400, size  8, enabled
	map[14]: type 4, range 32, base 00002000, size  7, enabled
pcib0: matched entry for 0.30.INTB
pcib0: slot 30 INTB hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2641, revid=0x04
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x266f, revid=0x04
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type 4, range 32, base 000018c0, size  4, enabled
found->	vendor=0x8086, dev=0x266a, revid=0x04
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type 4, range 32, base 000020a0, size  5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0xc8100000-0xc81fffff
pcib1:   prefetched decode 0xd0000000-0xd7ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found->	vendor=0x1002, dev=0x5653, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib1: (null) requested memory range 0xd0000000-0xd7ffffff: good
	map[14]: type 4, range 32, base 00003000, size  8, enabled
pcib1: (null) requested I/O range 0x3000-0x30ff: in range
	map[18]: type 1, range 32, base c8100000, size 16, enabled
pcib1: (null) requested memory range 0xc8100000-0xc810ffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2:   secondary bus     9
pcib2:   subordinate bus   9
pcib2:   I/O decode        0x0-0x0
pcib2:   memory decode     0x0-0x0
pcib2:   prefetched decode 0x0-0x0
pci9: <ACPI PCI bus> on pcib2
pci9: physical bus=9
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib3:   secondary bus     10
pcib3:   subordinate bus   10
pcib3:   I/O decode        0x0-0x0
pcib3:   memory decode     0x0-0x0
pcib3:   prefetched decode 0x0-0x0
pci10: <ACPI PCI bus> on pcib3
pci10: physical bus=10
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib4:   secondary bus     2
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x0-0x0
pcib4:   memory decode     0x0-0x0
pcib4:   prefetched decode 0x0-0x0
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.RP03 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib4
pci2: physical bus=2
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 23 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pci0:29:7: Transition from D0 to D3
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5:   secondary bus     6
pcib5:   subordinate bus   7
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0xc8200000-0xc82fffff
pcib5:   prefetched decode 0xfff00000-0xfffff
pcib5:   Subtractively decoded bridge.
pci6: <ACPI PCI bus> on pcib5
pci6: physical bus=6
found->	vendor=0x104c, dev=0x8031, revid=0x00
	bus=6, slot=1, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x31 (1470 ns), mingnt=0x44 (17000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base c8216000, size 12, enabled
pcib5: (null) requested memory range 0xc8216000-0xc8216fff: good
pcib5: matched entry for 6.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 18
found->	vendor=0x104c, dev=0x8032, revid=0x00
	bus=6, slot=1, func=2
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0012, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base c8217000, size 11, enabled
pcib5: (null) requested memory range 0xc8217000-0xc82177ff: good
	map[14]: type 1, range 32, base c8210000, size 14, enabled
pcib5: (null) requested memory range 0xc8210000-0xc8213fff: good
pcib5: matched entry for 6.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 18
found->	vendor=0x104c, dev=0x8033, revid=0x00
	bus=6, slot=1, func=3
	class=01-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0002, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base c8214000, size 13, enabled
pcib5: (null) requested memory range 0xc8214000-0xc8215fff: good
pcib5: matched entry for 6.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 18
found->	vendor=0x8086, dev=0x4220, revid=0x05
	bus=6, slot=3, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0012, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base c8218000, size 12, enabled
pcib5: (null) requested memory range 0xc8218000-0xc8218fff: good
pcib5: matched entry for 6.3.INTA
pcib5: slot 3 INTA hardwired to IRQ 17
found->	vendor=0x14e4, dev=0x169c, revid=0x03
	bus=6, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0012, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type 1, range 32, base c8200000, size 16, enabled
pcib5: (null) requested memory range 0xc8200000-0xc820ffff: good
pcib5: matched entry for 6.8.INTA
pcib5: slot 8 INTA hardwired to IRQ 16
cbb0: <PCI-CardBus Bridge> mem 0xc8216000-0xc8216fff irq 18 at device 1.0 on pci6
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc8216000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x8031104c 0x02100007 0x06070000 0x00823108 
  0x10: 0xc8216000 0x020000a0 0x24070706 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07440112 
  0x40: 0x00661025 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x18441060 0x02d00019 0x000f0000 0x01c21b22 
  0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 
  0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pci6: <serial bus, FireWire> at device 1.2 (no driver attached)
pci6:1:2: Transition from D0 to D3
pci6: <mass storage> at device 1.3 (no driver attached)
pci6:1:3: Transition from D0 to D3
pci6: <network> at device 3.0 (no driver attached)
pci6:3:0: Transition from D0 to D3
bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xc8200000-0xc820ffff irq 16 at device 8.0 on pci6
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xc8200000
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:c0:9f:94:39:8f
bge0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 30.2 (no driver attached)
pci0:30:2: Transition from D0 to D3
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
pci0:30:3: Transition from D0 to D3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18c0-0x18cf at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18c0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcf7ff,0xe0000-0xe17ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 66500332 hz
Timecounter "TSC" frequency 1729009885 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
pfsync0: bpf attached
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging unlimited
DUMMYNET with IPv6 initialized (040826)
pflog0: bpf attached
lo0: bpf attached
Expensive timeout(9) function: 0xc05c87d0(0) 0.002451428 s
acpi_acad0: acline initialization start
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
pid 25: corrected slot count (0->1)
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on Intel ICH6 chip
ad0: DMA limited to UDMA33, controller found non-ATA66 cable
ad0: setting UDMA33 on Intel ICH6 chip
ad0: 76319MB <TOSHIBA MK8025GAS KA023A> at ata0-master UDMA33
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
acd0: setting PIO4 on Intel ICH6 chip
acd0: setting UDMA33 on Intel ICH6 chip
acpi_ec0: info: new max delay is 11000 us
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acd0: <MATSHITAUJ-845D/D100> DVDR drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable caddy, unlocked
acd0: Medium: no/blank disc
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
cpu0: Cx states changed
cpu0: Cx states changed
acpi_cmbat0: battery initialization start
  psargs-0438: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
SearchNode 0xc22ec3e8 StartNode 0xc22ec3e8 ReturnNode 0

**** Exception AE_NOT_FOUND during execution of method [\\_SB_.BAT1._BST] (Node 0xc22ec1e8)

Method Execution Stack:
    Method [_BST] executing:   17c #  88 Index (PBST, 0x 0)

Local Variables for method [_BST]:
    Local0: 0xc23ae628 <Obj>             Integer        0       0
    Local1: 0xc23aeaa8 <Obj>             Integer        0    1130
    Local2: 0xc23ae5a8 <Obj>             Integer        0    4165
    Local3: 0xc23ae3a8 <Obj>             Integer        0       0
    Local4: 0xc23ae828 <Obj>             Integer        0       0
    Local5: 0xc23ae6a8 <Obj>             Integer        0       1
    Local6: 0xc23aea28 <Obj>             Integer        0       1
    Local7: 0xc23ae728 <Obj>             Integer        0       0

Arguments for Method [_BST]:  (0 arguments defined, max concurrency = ff)
    Arg0:   0 <NullObj>
    Arg1:   0 <NullObj>
    Arg2:   0 <NullObj>
    Arg3:   0 <NullObj>
    Arg4:   0 <NullObj>
    Arg5:   0 <NullObj>
    Arg6:   0 <NullObj>

 psparse-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc22ec1e8), AE_NOT_FOUND
acpi_cmbat0: error fetching current battery status -- AE_NOT_FOUND
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
Expensive timeout(9) function: 0xc05aa840(0xc2328e10) 0.064885062 s
cpu0: Cx states changed
  psargs-0438: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
SearchNode 0xc22ec3e8 StartNode 0xc22ec3e8 ReturnNode 0

**** Exception AE_NOT_FOUND during execution of method [\\_SB_.BAT1._BST] (Node 0xc22ec1e8)

Method Execution Stack:
    Method [_BST] executing:   17c #  88 Index (PBST, 0x 0)

Local Variables for method [_BST]:
    Local0: 0xc23af028 <Obj>             Integer        0       0
    Local1: 0xc23ae4a8 <Obj>             Integer        0    10fc
    Local2: 0xc239c628 <Obj>             Integer        0    4165
    Local3: 0xc23aea28 <Obj>             Integer        0       0
    Local4: 0xc239c8a8 <Obj>             Integer        0       0
    Local5: 0xc239c9a8 <Obj>             Integer        0       1
    Local6: 0xc23ae828 <Obj>             Integer        0       1
    Local7: 0xc23aeaa8 <Obj>             Integer        0       0

Arguments for Method [_BST]:  (0 arguments defined, max concurrency = ff)
    Arg0:   0 <NullObj>
    Arg1:   0 <NullObj>
    Arg2:   0 <NullObj>
    Arg3:   0 <NullObj>
    Arg4:   0 <NullObj>
    Arg5:   0 <NullObj>
    Arg6:   0 <NullObj>

 psparse-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc22ec1e8), AE_NOT_FOUND
acpi_cmbat0: error fetching current battery status -- AE_NOT_FOUND
  psargs-0438: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
SearchNode 0xc22ec3e8 StartNode 0xc22ec3e8 ReturnNode 0

**** Exception AE_NOT_FOUND during execution of method [\\_SB_.BAT1._BST] (Node 0xc22ec1e8)

Method Execution Stack:
    Method [_BST] executing:   17c #  88 Index (PBST, 0x 0)

Local Variables for method [_BST]:
    Local0: 0xc23ae828 <Obj>             Integer        0       0
    Local1: 0xc239c528 <Obj>             Integer        0    10fc
    Local2: 0xc239c8a8 <Obj>             Integer        0    4165
    Local3: 0xc23aea28 <Obj>             Integer        0       0
    Local4: 0xc23ae628 <Obj>             Integer        0       0
    Local5: 0xc23ae4a8 <Obj>             Integer        0       1
    Local6: 0xc23af028 <Obj>             Integer        0       1
    Local7: 0xc23aeaa8 <Obj>             Integer        0       0

Arguments for Method [_BST]:  (0 arguments defined, max concurrency = ff)
    Arg0:   0 <NullObj>
    Arg1:   0 <NullObj>
    Arg2:   0 <NullObj>
    Arg3:   0 <NullObj>
    Arg4:   0 <NullObj>
    Arg5:   0 <NullObj>
    Arg6:   0 <NullObj>

 psparse-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc22ec1e8), AE_NOT_FOUND
acpi_cmbat0: error fetching current battery status -- AE_NOT_FOUND
  psargs-0438: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
SearchNode 0xc22ec3e8 StartNode 0xc22ec3e8 ReturnNode 0

**** Exception AE_NOT_FOUND during execution of method [\\_SB_.BAT1._BST] (Node 0xc22ec1e8)

Method Execution Stack:
    Method [_BST] executing:   17c #  88 Index (PBST, 0x 0)

Local Variables for method [_BST]:
    Local0: 0xc23af028 <Obj>             Integer        0       0
    Local1: 0xc23ae928 <Obj>             Integer        0    10fc
    Local2: 0xc23ae628 <Obj>             Integer        0    4165
    Local3: 0xc23aea28 <Obj>             Integer        0       0
    Local4: 0xc239c9a8 <Obj>             Integer        0       0
    Local5: 0xc239c528 <Obj>             Integer        0       1
    Local6: 0xc23ae828 <Obj>             Integer        0       1
    Local7: 0xc23aeaa8 <Obj>             Integer        0       0

Arguments for Method [_BST]:  (0 arguments defined, max concurrency = ff)
    Arg0:   0 <NullObj>
    Arg1:   0 <NullObj>
    Arg2:   0 <NullObj>
    Arg3:   0 <NullObj>
    Arg4:   0 <NullObj>
    Arg5:   0 <NullObj>
    Arg6:   0 <NullObj>

 psparse-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc22ec1e8), AE_NOT_FOUND
acpi_cmbat0: error fetching current battery status -- AE_NOT_FOUND
  psargs-0438: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
SearchNode 0xc22ec3e8 StartNode 0xc22ec3e8 ReturnNode 0

**** Exception AE_NOT_FOUND during execution of method [\\_SB_.BAT1._BST] (Node 0xc22ec1e8)

Method Execution Stack:
    Method [_BST] executing:   17c #  88 Index (PBST, 0x 0)

Local Variables for method [_BST]:
    Local0: 0xc23ae828 <Obj>             Integer        0       0
    Local1: 0xc239c628 <Obj>             Integer        0    10fc
    Local2: 0xc239c9a8 <Obj>             Integer        0    4165
    Local3: 0xc23aea28 <Obj>             Integer        0       0
    Local4: 0xc23ae4a8 <Obj>             Integer        0       0
    Local5: 0xc23ae928 <Obj>             Integer        0       1
    Local6: 0xc23af028 <Obj>             Integer        0       1
    Local7: 0xc23aeaa8 <Obj>             Integer        0       0

Arguments for Method [_BST]:  (0 arguments defined, max concurrency = ff)
    Arg0:   0 <NullObj>
    Arg1:   0 <NullObj>
    Arg2:   0 <NullObj>
    Arg3:   0 <NullObj>
    Arg4:   0 <NullObj>
    Arg5:   0 <NullObj>
    Arg6:   0 <NullObj>

 psparse-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc22ec1e8), AE_NOT_FOUND
acpi_cmbat0: error fetching current battery status -- AE_NOT_FOUND
  psargs-0438: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
SearchNode 0xc22ec3e8 StartNode 0xc22ec3e8 ReturnNode 0

**** Exception AE_NOT_FOUND during execution of method [\\_SB_.BAT1._BST] (Node 0xc22ec1e8)

Method Execution Stack:
    Method [_BST] executing:   17c #  88 Index (PBST, 0x 0)

Local Variables for method [_BST]:
    Local0: 0xc23af028 <Obj>             Integer        0       0
    Local1: 0xc239c8a8 <Obj>             Integer        0    10fc
    Local2: 0xc23ae4a8 <Obj>             Integer        0    4165
    Local3: 0xc23aea28 <Obj>             Integer        0       0
    Local4: 0xc239c528 <Obj>             Integer        0       0
    Local5: 0xc239c628 <Obj>             Integer        0       1
    Local6: 0xc23ae828 <Obj>             Integer        0       1
    Local7: 0xc23aeaa8 <Obj>             Integer        0       0

Arguments for Method [_BST]:  (0 arguments defined, max concurrency = ff)
    Arg0:   0 <NullObj>
    Arg1:   0 <NullObj>
    Arg2:   0 <NullObj>
    Arg3:   0 <NullObj>
    Arg4:   0 <NullObj>
    Arg5:   0 <NullObj>
    Arg6:   0 <NullObj>

 psparse-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc22ec1e8), AE_NOT_FOUND
acpi_cmbat0: error fetching current battery status -- AE_NOT_FOUND
  psargs-0438: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
SearchNode 0xc22ec3e8 StartNode 0xc22ec3e8 ReturnNode 0

**** Exception AE_NOT_FOUND during execution of method [\\_SB_.BAT1._BST] (Node 0xc22ec1e8)

Method Execution Stack:
    Method [_BST] executing:   17c #  88 Index (PBST, 0x 0)

Local Variables for method [_BST]:
    Local0: 0xc23ae828 <Obj>             Integer        0       0
    Local1: 0xc23ae628 <Obj>             Integer        0    10fc
    Local2: 0xc239c528 <Obj>             Integer        0    4165
    Local3: 0xc23aea28 <Obj>             Integer        0       0
    Local4: 0xc23ae928 <Obj>             Integer        0       0
    Local5: 0xc239c8a8 <Obj>             Integer        0       1
    Local6: 0xc23af028 <Obj>             Integer        0       1
    Local7: 0xc23aeaa8 <Obj>             Integer        0       0

Arguments for Method [_BST]:  (0 arguments defined, max concurrency = ff)
    Arg0:   0 <NullObj>
    Arg1:   0 <NullObj>
    Arg2:   0 <NullObj>
    Arg3:   0 <NullObj>
    Arg4:   0 <NullObj>
    Arg5:   0 <NullObj>
    Arg6:   0 <NullObj>

 psparse-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc22ec1e8), AE_NOT_FOUND
acpi_cmbat0: error fetching current battery status -- AE_NOT_FOUND
bge0: link state changed to UP
acpi_cmbat1: battery initialization failed, giving up
splash: image decoder found: fade_saver
Linux ELF exec handler installed

--+HP7ph2BbKc20aGI--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050517163212.GG14297>