Date: Tue, 1 May 2001 11:30:02 -0700 (PDT) From: "F. Johan Beisser" <johan.beisser@caustic.org> To: stable@freebsd.org Subject: ACPI support, FreeBSD 4.3-RELEASE, and other wonkyness. Message-ID: <Pine.BSF.4.21.0105011115580.12910-200000@pogo.caustic.org>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I am having some minor problems with my Toshiba Satellite Pro 4600, and FreeBSD 4.3. i've attached the output from "boot -v" of the current kernel, which is essentially the GENERIC kernel with USB devices commented out (USB was sharing IRQ 11 with many other PCI devices). The partial issue, seems to be a lack of ACPI support in freebsd, and perhaps more than a few things related to the Toshiba BIOS. thanks for your help, -- johan +------/ f. johan beisser /-----------------------------------+ Web: http://caustic.org/~jan email: johan.beisser@caustic.org "knowledge is power, power corrupts. study hard, be evil" [-- Attachment #2 --] Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RELEASE #0: Fri Apr 27 18:20:15 PDT 2001 root@garandou.nttmcl.com:/usr/src/sys/compile/GARANDOU Calibrating clock(s) ... TSC clock: 797535761 Hz, i8254 clock: 1193122 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (797.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 267780096 (261504K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00446000 - 0x0ff57fff, 263266304 bytes (64274 pages) avail memory = 256524288 (250512K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f0250 bios32: Entry = 0xfbf88 (c00fbf88) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xdbab pnpbios: Found PnP BIOS data at 0xc00f8f30 pnpbios: Entry = f0000:928c Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID d935f351 Other BIOS signatures found: ACPI: 000f01a0 Preloaded elf kernel "kernel" at 0xc0420000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x1130, revid=0x11 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f0000000, size 26 found-> vendor=0x8086, dev=0x1131, revid=0x11 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x2448, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=7 secondarybus=2 found-> vendor=0x8086, dev=0x244c, revid=0x03 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x244a, revid=0x03 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000cff0, size 4 found-> vendor=0x8086, dev=0x2442, revid=0x03 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 0000cf80, size 5 found-> vendor=0x8086, dev=0x2444, revid=0x03 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=c, irq=11 map[20]: type 1, range 32, base 0000cf60, size 5 found-> vendor=0x8086, dev=0x2445, revid=0x03 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[10]: type 1, range 32, base 0000ce00, size 8 map[14]: type 1, range 32, base 0000cdc0, size 6 found-> vendor=0x8086, dev=0x2446, revid=0x03 class=07-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[10]: type 1, range 32, base 0000ca00, size 8 map[14]: type 1, range 32, base 0000c980, size 7 pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=8086 device=1131)> at device 1.0 on pci0 found-> vendor=0x1023, dev=0x9910, revid=0x63 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base fc000000, size 25 map[14]: type 1, range 32, base fbc00000, size 22 map[18]: type 1, range 32, base f8000000, size 25 map[1c]: type 1, range 32, base f7ff8000, size 15 pci1: <PCI bus> on pcib1 pci1: <Trident model 9910 VGA-compatible display device> (vendor=0x1023, dev=0x9910) at 0.0 irq 11 pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 found-> vendor=0x8086, dev=0x2449, revid=0x03 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base f7dff000, size 12 map[14]: type 1, range 32, base 0000df40, size 6 found-> vendor=0x1179, dev=0x0617, revid=0x31 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=4 secondarybus=4 intpin=a, irq=255 found-> vendor=0x1179, dev=0x0617, revid=0x31 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=5 secondarybus=5 intpin=b, irq=255 pci2: <PCI bus> on pcib2 fxp0: <Intel PLC 10/100 Ethernet> port 0xdf40-0xdf7f mem 0xf7dff000-0xf7dfffff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:00:39:90:58:2c bpf: fxp0 attached chip1: <PCI to CardBus bridge (vendor=1179 device=0617)> at device 13.0 on pci2 chip2: <PCI to CardBus bridge (vendor=1179 device=0617)> at device 13.1 on pci2 isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 ATA100 controller> port 0xcff0-0xcfff at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xcff0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-slave: ATAPI probe a=00 b=00 ata0-master: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xcff8 ata1: mask=03 status0=50 status1=00 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI probe a=14 b=eb ata1-slave: ATAPI probe a=ff b=ff ata1: mask=03 status0=00 status1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 pci0: <UHCI USB controller> (vendor=0x8086, dev=0x2442) at 31.2 irq 11 pci0: <UHCI USB controller> (vendor=0x8086, dev=0x2444) at 31.4 irq 11 pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 11 pci0: <unknown card> (vendor=0x8086, dev=0x2446) at 31.6 irq 11 ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe at port 0x330 on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode stat is f2 stat is f2 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x41 0x41 0x41 0x41 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c040, tty 631092, net 671892 bpf: sl0 attached ata0-master: success setting UDMA4 on Intel chip Creating DISK ad0 Creating DISK wd0 ad0: <IBM-DJSA-220/JS4OAC3A> ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA66 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA66 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <TOSHIBA DVD-ROM SD-R2002/1324> CD-RW drive at ata1 as master acd0: read 4133KB/s (4133KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet acd0: Writes: CD-R, CD-RW, test write acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked Mounting root from ufs:/dev/ad0s2a ad0s1: type 0xc, start 63, end = 22539194, size 22539132 : OK ad0s2: type 0xa5, start 22539195, end = 39070079, size 16530885 : OK start_init: trying /sbin/init
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0105011115580.12910-200000>