Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 3 Oct 2011 12:54:30 +0800
From:      Adrian Chadd <adrian@freebsd.org>
To:        Roman Bogorodskiy <novel@freebsd.org>
Cc:        freebsd-wireless@freebsd.org
Subject:   Re: bwn + BETA3/ppc = very unstable
Message-ID:  <CAJ-VmonYRHHbU-z219TjqnOxLppWhyjpTNw09Z_qzbuPCGmzCA@mail.gmail.com>
In-Reply-To: <20111003044350.GD1943@reemsky>
References:  <20111002232848.GA1943@reemsky> <CAJ-Vmo=DidydmY3Lr-WhMnNfPRODnO0C4rd=%2B2XcdeUDUe4WoA@mail.gmail.com> <20111003024406.GC1943@reemsky> <20111003044350.GD1943@reemsky>

next in thread | previous in thread | raw e-mail | index | archive | help
On 3 October 2011 12:43, Roman Bogorodskiy <novel@freebsd.org> wrote:
> =A0Roman Bogorodskiy wrote:

> Hm, I have applied a fix similar to this one:
>
> http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/ic/bwi.c.diff?r1=3D1.88=
;r2=3D1.89
>
> I'm not sure if it's a coincidence or not, but I had no panics since
> then. Packet loss rate are still very high - first packets go through
> without losses, but eventually loss rate goes up.

It sounds like a calibration issue.

> Now uptime is 1 hour and loss rate is about 80-85%.
>
> Any directions how can I debug this?

Well, firstly, can you please do up a patch against -HEAD? I'll commit
it to FreeBSD-HEAD ASAP and then include it in the list of things I
want to backmerge into -9.

Debugging this - I'd first isolate it to whether it is:

* TX issues;
* RX issues;
* or both TX and RX issues.

I suggest liberal use of iperf in UDP mode to TX things. It's a bit
difficult as TX'ing a one way UDP stream also involves RX'ing an ACK
from the remote end, so it isn't a 100% guaranteed way of debugging
it. But it hopefully will show it's either TX or RX related.

I'd also enable BWI_DEBUG and then flip on the relevant bits that let
you debug the attach and configuration bits (BWI_DBG_RF,
BWI_DBG_TXPOWER, BWI_DBG_ATTACH).
In fact, enable both BWI_DEBUG and BWI_DEBUG_VERBOSE in your kernel
config and rebuild.

The BWI_DBG bits are defined in if_bwivar.h.

Adrian



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmonYRHHbU-z219TjqnOxLppWhyjpTNw09Z_qzbuPCGmzCA>