Date: Wed, 29 Jul 1998 15:34:59 +0200 (CEST) From: Holm Tiffe <freebsd@magnet.geophysik.tu-freiberg.de> To: maf@net.ohio-state.edu (Mark Fullmer) Cc: freebsd-current@FreeBSD.ORG Subject: Re: Answering myself, was: URGENT! ASUS P2B/LS supported ? Message-ID: <199807291334.PAA06279@magnet.geophysik.tu-freiberg.de> In-Reply-To: <19980728120553.A22817@net.ohio-state.edu> from Mark Fullmer at "Jul 28, 98 12:05:53 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
> On Tue, Jul 28, 1998 at 01:08:58PM +0200, Holm Tiffe wrote: [..] > > This is -stable around the 2.2.7 branch, not current. The pci code > has changed quite a bit in -current. > > chip2 <Intel 82371AB PCI-ISA bridge> rev 2 on pci0:4:0 > chip3 <Intel 82371AB IDE interface> rev 1 on pci0:4:1 > chip4 <Intel 82371AB USB interface> rev 1 int d irq 12 on pci0:4:2 > chip5 <Intel 82371AB Power management controller> rev 2 on pci0:4:3 > ahc0 <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0 int a irq 12 on pci0:6:0 > pci_map_mem failed: bad memory type=0xfffff004 > ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 32/255 SCBs > fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 5 int a irq 10 on pci0:7:0 > avail memory = 259104768 (253032K bytes) Probing for devices on PCI bus 0: chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0 chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0 chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0 chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 255 on pci0.4.2 chip4: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3 ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 15 on pci0.6.0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 32/255 SCBs fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 10 on pci0.7.0 fxp0: Ethernet address 00:e0:18:90:2b:8f This is from my dmesg output. You are sure, that you have used the cam-drivers? [yeah, I know, a stupid question] (I've never tryed to use the old drivers) Have we the same revision of the host to pci bridge ? Holm -- ******************************************************************************* * Holm Tiffe holm@geophysik.tu-freiberg.de * * Freiberger Strasse 24 * * 09600 Kleinschirma, Germany Microsoft is not the Answer - * * Tel.: 49 3731 74233 Microsoft is the Question, * * UUCP: 49 3731 73719 unicorn!holm and the Answer is no ! * ******************************************************************************* To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199807291334.PAA06279>