Date: Thu, 15 Dec 2005 17:44:22 +0800 From: wsk <wsk@gddsn.org.cn> To: current@freebsd.org, hardware@freebsd.org, stable@freebsd.org Subject: Can support Intel's E8500 chipset on freebsd??? Message-ID: <43A13AF6.90003@gddsn.org.cn>
next in thread | raw e-mail | index | archive | help
lists: with DELL PE6850, It seems 6.0 Can't support the Intel's E8500 XMB chipset pciconf -lv: none0@pci0:9:0: class=0x050000 card=0x01701028 chip=0x26208086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'E8500 XMB A/B/C/D Identification Registers' class = memory subclass = RAM none1@pci0:9:1: class=0x050000 card=0x01701028 chip=0x26218086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'E8500 XMB A/B/C/D Miscellaneous Registers' class = memory subclass = RAM none2@pci0:9:2: class=0x050000 card=0x01701028 chip=0x26228086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'E8500 XMB A/B/C/D Memory Interleaving Registers' class = memory subclass = RAM dmesg: %dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Fri Dec 16 00:54:34 CST 2005 wsk@wfdb2.gddsn.org.cn:/usr/obj/usr/src/sys/WFDB2 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) MP CPU 3.00GHz (2995.52-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x659d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,CX16,<b14>> AMD Features=0x20100800<SYSCALL,NX,LM> real memory = 9395240960 (8960 MB) avail memory = 8288649216 (7904 MB) ACPI APIC Table: <DELL PE68x0 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 cpu2 (AP): APIC ID: 8 cpu3 (AP): APIC ID: 14 ioapic1: Changing APIC ID to 1 ioapic1: WARNING: intbase 32 != expected base 24 ioapic2: Changing APIC ID to 2 ioapic2: WARNING: intbase 64 != expected base 56 ioapic3: Changing APIC ID to 3 ioapic3: WARNING: intbase 96 != expected base 88 ioapic4: Changing APIC ID to 4 ioapic4: WARNING: intbase 128 != expected base 120 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard ioapic2 <Version 2.0> irqs 64-87 on motherboard ioapic3 <Version 2.0> irqs 96-119 on motherboard ioapic4 <Version 2.0> irqs 128-151 on motherboard acpi0: <DELL PE68x0> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0 pci_link4: <ACPI PCI Link LNKE> on acpi0 pci_link5: <ACPI PCI Link LNKF> on acpi0 pci_link6: <ACPI PCI Link LNKG> on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 3 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci7: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci8: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci11: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci14: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> mem 0xdf6ff000-0xdf6fffff at device 0.0 on pci14 pci15: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci14 pci18: <ACPI PCI bus> on pcib8 bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem 0xdf8f0000-0xdf8fffff irq 64 at device 2.0 on pci18 miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:12:3f:ff:81:47 bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem 0xdf8e0000-0xdf8effff irq 65 at device 2.1 on pci18 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:12:3f:ff:81:48 pcib9: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci19: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci19 pci20: <ACPI PCI bus> on pcib10 amr0: <LSILogic MegaRAID 1.51> mem 0xdd0f0000-0xdd0fffff,0xdf4c0000-0xdf4fffff irq 110 at device 14.0 on pci20 amr0: <LSILogic PERC 4e/Di> Firmware 521S, BIOS H430, 256MB RAM pcib11: <ACPI PCI-PCI bridge> at device 0.2 on pci19 pci21: <ACPI PCI bus> on pcib11 pci0: <memory, RAM> at device 9.0 (no driver attached) pci0: <memory, RAM> at device 9.1 (no driver attached) pci0: <memory, RAM> at device 9.2 (no driver attached) pci0: <memory, RAM> at device 9.3 (no driver attached) pci0: <memory, RAM> at device 9.4 (no driver attached) pci0: <memory, RAM> at device 9.5 (no driver attached) pci0: <memory, RAM> at device 9.6 (no driver attached) pci0: <memory, RAM> at device 9.7 (no driver attached) pci0: <memory, RAM> at device 11.0 (no driver attached) pci0: <memory, RAM> at device 11.1 (no driver attached) pci0: <memory, RAM> at device 11.2 (no driver attached) pci0: <memory, RAM> at device 11.3 (no driver attached) pci0: <memory, RAM> at device 11.4 (no driver attached) pci0: <memory, RAM> at device 11.5 (no driver attached) pci0: <memory, RAM> at device 11.6 (no driver attached) pci0: <memory, RAM> at device 11.7 (no driver attached) pci0: <memory, RAM> at device 13.0 (no driver attached) pci0: <memory, RAM> at device 13.1 (no driver attached) pci0: <memory, RAM> at device 13.2 (no driver attached) pci0: <memory, RAM> at device 13.3 (no driver attached) pci0: <memory, RAM> at device 13.4 (no driver attached) pci0: <memory, RAM> at device 13.5 (no driver attached) pci0: <memory, RAM> at device 13.6 (no driver attached) pci0: <memory, RAM> at device 13.7 (no driver attached) pci0: <memory, RAM> at device 15.0 (no driver attached) pci0: <memory, RAM> at device 15.1 (no driver attached) pci0: <memory, RAM> at device 15.2 (no driver attached) pci0: <memory, RAM> at device 15.3 (no driver attached) pci0: <memory, RAM> at device 15.4 (no driver attached) pci0: <memory, RAM> at device 15.5 (no driver attached) pci0: <memory, RAM> at device 15.6 (no driver attached) pci0: <memory, RAM> at device 15.7 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x6ce0-0x6cff irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x6cc0-0x6cdf irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x6ca0-0x6cbf irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff00000-0xdff003ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2 uhub4: multiple transaction translators uhub4: 2 ports with 2 removable, self powered pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci22: <ACPI PCI bus> on pcib12 pci22: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcafff,0xcb000-0xcc7ff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: vendor 0x413c product 0x3010, rev 2.00/2.20, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ukbd0: Dell Dell USB Keyboard, rev 1.10/2.00, addr 3, iclass 3/1 kbd0 at ukbd0 Timecounters tick every 1.000 msec acd0: DVDROM <HL-DT-ST DVD-ROM GDR-8084N/1.01> at ata0-master UDMA33 amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 1144320MB (2343567360 sectors) RAID 5 (optimal) ses0 at amr0 bus 0 target 6 lun 0 ses0: <PE/PV 1x5 SCSI BP 1.0> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Trying to mount root from ufs:/dev/amrd0s1a bge0: link state changed to UP any ideas?? TIA
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43A13AF6.90003>