Date: Fri, 6 Jul 2001 07:22:58 -0400 (EDT) From: "H. Wade Minter" <minter@lunenburg.org> To: Greg Smith <freebsd_mail@yahoo.com> Cc: <freebsd-mobile@freebsd.org> Subject: Re: 4.3-R lockup with Xircom RealPort REM56 (non-cardbus) Message-ID: <20010706072132.A81897-100000@ashburn.skiltech.com> In-Reply-To: <200107051957300340.002E1CEA@smtp.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Actually, it's showing: xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 10 slot 0 on pccard0 Even though I have the pccard_mem="0xd8000" line in rc.conf. Might that be something? --Wade On Thu, 5 Jul 2001, Greg Smith wrote: > Wade, > > These also look normal to me. > > When you last sent us the error messages it showed irq 3 iomem 0xd0000. > Do they now show irq 10 iomem 0xd8000? If they do, then your settings > seem to be working as desired. > > I'm still curious how a NIC can operate on only 8 bytes of ioport, e.g. > 0x2e8-0x2ef. Normally mine seem to take 16 or 32 bytes, which leads me > to believe that it may be a bad config index pointing to a modem > config. You could try changing the 0x27 in pccard.conf to auto or > default or 0x1 or 0x2 or 0x21 etc. and see if that helps. > > Otherwise I am running out of ideas. Except my old favorite of looking > at the details of how Windows has configured this card, and everything > else for that matter. > > Greg > > -----Original Message----- > > >/etc/defaults/pccard.conf (yes, I know, modifying /etc/default = bad) > and > >/etc/rc.conf attached. > > > >I'd bet one of those PCIs is the internal WinModem. The other one may > be > >the internal Maestro sound card. > > > >--Wade > > > >On Thu, 5 Jul 2001, Greg Smith wrote: > > > >> Wade, > >> > >> Given the dmesgs and the vmstat I cannot see anything unusual, only > the > >> following issues: > >> > >> last two PCI devices are not recognized by FreeBSD: > >> > >> found-> vendor=0x11c1, dev=0x0449, revid=0x01 > >> class=07-80-00, hdrtype=0x00, mfdev=0 > >> subordinatebus=0 secondarybus=0 > >> intpin=a, irq=11 > >> map[10]: type 1, range 32, base 41200000, size 8 > >> map[14]: type 1, range 32, base 00003800, size 3 > >> map[18]: type 1, range 32, base 00003400, size 8 > >> > >> found-> vendor=0x1002, dev=0x4c4d, revid=0x64 > >> class=03-00-00, hdrtype=0x00, mfdev=0 > >> subordinatebus=0 secondarybus=0 > >> intpin=a, irq=11 > >> map[10]: type 1, range 32, base 40000000, size 24 > >> map[14]: type 1, range 32, base 00002000, size 8 > >> map[18]: type 1, range 32, base 41000000, size 12 > >> > >> interrupt activity at rtc, which I haven't seen before: > >> > >> # vmstat -i > >> interrupt total rate > >> ata0 irq14 1781 27 > >> fdc0 irq6 2 0 > >> atkbd0 irq1 264 4 > >> clk irq0 6425 100 > >> rtc irq8 8224 128 > >> Total 16696 260 > >> > >> windows showed Secondary IDE, but FreeBSD can't find it: > >> > >> ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x38a8 > >> ata1: mask=00 status0=a5 status1=a5 > >> ata1: probe allocation failed > >> > >> But I can't say that these are problems. I don't know. > >> > >> Hopefully someone else will come up with something. > >> > >> > >> I would be interested in seeing your /etc/rc.conf and > /etc/pccard.conf. > >> > >> Greg > >> > >> -----Original Message----- > >> > >> >Attached is the output of boot -v, as well as vmstat -i. > >> > > >> >The error messages have already been posted. > >> > > >> >--Wade > >> > >> >> >> -----Original Message----- > >> >> >> > >> >> >> >Ok, I booted into Win98 and used Compaq's diagnostics to get > my > >> IRQ > >> >> >> list. > >> >> >> >Here's what it shows > >> >> >> > > >> >> >> >0 - System Timer > >> >> >> >1 - Keyboard > >> >> >> >2 - "Programmable interrupt controller" > >> >> >> >3 - Infared port > >> >> >> >4 - COM1 > >> >> >> >5 - Meastro DOS Games/FM devices > >> >> >> >6 - Floppy controller > >> >> >> >7 - Printer port > >> >> >> >8 - CMOS/RTC > >> >> >> >9 - SCI IRQ used by ACPI bus > >> >> >> >10 - None > >> >> >> >11 - A ton of stuff > >> >> >> >12 - Compaq EasyPoint IV > >> >> >> >13 - Numeric data processor > >> >> >> >14 - Primary IDE > >> >> >> >15 - Secondary IDE > >> > >> > >> > >> _________________________________________________________ > >> Do You Yahoo!? > >> Get your free @yahoo.com address at http://mail.yahoo.com > >> > > > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010706072132.A81897-100000>