Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 04 Jul 2007 20:43:16 -0700
From:      Paul Saab <ps@freebsd.org>
To:        soralx@cydem.org
Cc:        freebsd-hardware@freebsd.org
Subject:   Re: hardware/driver incompatibility ?
Message-ID:  <468C68D4.1060903@freebsd.org>
In-Reply-To: <20070627214300.319cbe41@soralx>
References:  <7D3EA7E7-CF83-4385-A8FC-611B886CC7E3@patpro.net> <20070627214300.319cbe41@soralx>

next in thread | previous in thread | raw e-mail | index | archive | help
The WD5000YS issues are due to a firmware bug
http://support.wdc.com/download/index.asp?cxml=n&pid=15&swid=57


soralx@cydem.org wrote:
>> - 2 Western Digital WD2500YS hard drives
>> - 1GB RAM
>>     
> [...]
>   
>> Is there any way I could test my HD to detect/prevent failure ?
>>     
>
> install smartmontools from ports
> then: smarctl -t long /dev/ad4
> after a couple hours check status: smartctl -a /dev/ad4
>
> Western Digital harddisks are notoriously unreliable (I just had 2
> WD5000YS fail recently, at about the same time; one had ~200 hrs on it,
> the other ~1700h), especially the YS models. Also, WDC won't replace
> them... Beware.
>
> [SorAlx]  ridin' VN1500-B2
> _______________________________________________
> freebsd-hardware@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"
>
>   



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?468C68D4.1060903>