Date: Mon, 20 Apr 2009 11:19:10 GMT From: Tinus Blaauw <tinus@nanodog.org> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/133872: SATA300 controlled as SATA150 on ICH7R mobo Message-ID: <200904201119.n3KBJA0f003094@www.freebsd.org> Resent-Message-ID: <200904201120.n3KBK3K4050549@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 133872 >Category: misc >Synopsis: SATA300 controlled as SATA150 on ICH7R mobo >Confidential: no >Severity: non-critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Apr 20 11:20:03 UTC 2009 >Closed-Date: >Last-Modified: >Originator: Tinus Blaauw >Release: AMD64 - FreeBSD 7.1-RELEASE (GENERIC) #0: Thu Jan 1 08:58:24 UTC 2009 >Organization: None >Environment: FreeBSD server.nanite.local 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Thu Jan 1 08:58:24 UTC 2009 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 >Description: A very good day! I find myself in a severe predicament. I am unable to get my SATA300 drives running at SATA300. Instead they are reported as SATA150. My setup is NOT being run as RAID, only as a normal setup with 3 hard drives, and a 4th DMA-33 drive on which the O/S is installed. Motherboard : MSI G31M3-F CPU : CPU: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (2520.67-MHz K8-class CPU) SATA Controller: atapci0: <SiI SiI 3114 SATA150 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfebffc00-0xfebfffff irq 16 at device 0.0 on pci3 [No drives connected to this PCI Card] AND atapci2: <Intel ICH7 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at device 31.2 on pci0 [All 3 hard drives connected to this on-board controller] Hard Drives : ad12: 343399MB <Seagate ST3360320AS 3.AAM> at ata6-master SATA150 ad13: 305245MB <WDC WD3200AAKS-00SBA0 12.01B01> at ata6-slave SATA150 ad14: 953869MB <WDC WD1001FALS-00J7B0 05.00K05> at ata7-master SATA150 Thank you so kindly for any/all help! Regards Tinus >How-To-Repeat: Same hardware as above - unconfirmed though. >Fix: None known. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200904201119.n3KBJA0f003094>