Date: Sun, 15 Jan 2017 12:00:37 -0700 From: Ian Lepore <ian@freebsd.org> To: Torfinn Ingolfsen <torfinn.ingolfsen@getmail.no>, freebsd-arm@FreeBSD.org Cc: Thomas Skibo <thomasskibo@yahoo.com> Subject: Re: Finally bringing FreeBSD to Parallella Message-ID: <1484506837.86335.106.camel@freebsd.org> In-Reply-To: <20170114215137.4b77f54ef7d7b9cb3b11bc6c@getmail.no> References: <2CAC521E-AB65-453F-B1CC-DE025DA43596@yahoo.com> <CAJ-Vmo=cCBS4-W_q0RKYT4pnkdoKj_kSrk8eem%2BeDOqZt2W-AQ@mail.gmail.com> <4B0F21E0-D0FD-409D-81A5-C0DBBFF26251@yahoo.com> <20170114215137.4b77f54ef7d7b9cb3b11bc6c@getmail.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 2017-01-14 at 21:51 +0100, Torfinn Ingolfsen wrote: > Hello, > > On Mon, 2 Jan 2017 10:08:59 -0800 > Thomas Skibo via freebsd-arm <freebsd-arm@freebsd.org> wrote: > > > > > > > I found the instructions I wrote a while ago on booting FreeBSD on > > Parallella and put it back on my site: http://www.skibo.net/zedbsd/ > > #parallella . It explains how to modify the Zedboard SD card image > > and > > boot it on Parallella. I updated the .dtb file in the tarball > > because the old one isn?t compatible with 11-release. It would > > help if somebody could give this a whirl and give me feedback. > The instructions works. There is one small change: the bitstreams are > no longer discussed in in Parallella's guide for creating an SD card. > I just used a bistream I had from back when I got the card. > The image created appears to work also, but I get no output on the > serial console. Is this image supposed to have serial console? > I use > cu -l /dev/cuau0 -s 115200 > with a PL2303HX usb-to-serial cable > Was this just a typo in the mail? The usb serial device is cuaU0, uppercase U. -- Ian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1484506837.86335.106.camel>