Date: Thu, 10 Nov 2016 09:45:14 +0000 (UTC) From: Markus Graf <markusalbertgraf@gmail.com> To: freebsd-questions@freebsd.org Subject: controller panic: iwn0: iwn_intr: fatal firmware error error type = "BAD_COMMAND" (0x00000007) Message-ID: <872975824.12877.1478771114220@ip-10-184-174-35>
next in thread | raw e-mail | index | archive | help
------=_Part_12874_112851790.1478771114219
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Hi all,
I am new to freebsd and wondering what I am doing wrong.
I keep getting iwn controller panic while booting.
Eventually the machine does come up and does connect to the wireless networ=
k.
But it takes quite long to boot and has sometimes one, sometimes up to 4 ro=
unds of iwn controller panic.
The relevant lines from rc.conf around the panic are below and I attach dme=
sg, rc.conf and loader.conf
The panic might have something to do with dhcp since I do not get it when I=
use dhclient after boot.
Thank you in advance for all tips
Best regards
Markus
** my system
I am on a Lenovo SL520 Laptop
the wlan is identified as
iwn0: <Intel Centrino Wireless-N 1000> mem 0xf2200000-0xf2201fff irq 19 at =
device 0.0 on pci3
uname -a
FreeBSD ########## 11.0-RELEASE-p2 FreeBSD 11.0-RELEASE-p2 #0: Mon Oct 24 0=
6:55:27 UTC 2016
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC=C2=A0 amd64
freebsd-version
11.0-RELEASE-p3
** when does the panic show up
I only get this error when booting.
I cannot remember having seen this panic when I delete the DHCP from ifconf=
ig_wlan0=3D"WPA DHCP" and use dhclient later.
When I play around manually, I never get the panic.
Oddly. when I use SYNDHCP instead of DHCP I get an errormessage while booti=
ng about some wrong pararameter, but *no panic either*.
This errormessage flashes by, to fast to read, and does not show up in eith=
er dmesg or messages.
Putting
if_iwn_load=3D"YES"
iwn1000fw_load=3D"YES"
into loader.conf, does not change anything except reporting "module iwn alr=
eady present!" in line 9 of dmesg.
The result without the two lines is the same.
btw
The wlan worked fine when I had PC-BSD on the Laptop for a couple of weeks,=
but being new to BSD maybe I just didn't notice.
And no, I could not get node.js to work because of openssl-libressl conflic=
ts and I do not have enough ram for zfs.
** Excerpt from dmesg
---------------------------------------------------------------------------=
---------------------------------------
iwn0: <Intel Centrino Wireless-N 1000> mem 0xf2200000-0xf2201fff irq 19 at =
device 0.0 on pci3
.
.
.
wlan0: Ethernet address: ##:##:##:##:##:##
...
iwn0: iwn_read_firmware: ucode rev=3D0x271f0501
wlan0: link state changed to UP
re0: link state changed to UP
...
wlan0: link state changed to DOWN
iwn0: device timeout
iwn0: iwn_read_firmware: ucode rev=3D0x271f0501
iwn0: scan timeout
iwn0: iwn_read_firmware: ucode rev=3D0x271f0501
wlan0: link state changed to UP
iwn0: iwn_intr: fatal firmware error
firmware error log:
=C2=A0 error type=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =3D "BAD_COMMAND" (0x000000=
07)
=C2=A0 program counter =3D 0x000024D8
=C2=A0 source line=C2=A0=C2=A0=C2=A0=C2=A0 =3D 0x00000446
=C2=A0 error data=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =3D 0x0000000000000000
=C2=A0 branch link=C2=A0=C2=A0=C2=A0=C2=A0 =3D 0x000024D6000024D6
=C2=A0 interrupt link=C2=A0 =3D 0x0000082600000000
=C2=A0 time=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0 =3D 8365
driver status:
=C2=A0 tx ring=C2=A0 0: qid=3D0=C2=A0 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring=C2=A0 1: qid=3D1=C2=A0 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring=C2=A0 2: qid=3D2=C2=A0 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring=C2=A0 3: qid=3D3=C2=A0 cur=3D2=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring=C2=A0 4: qid=3D4=C2=A0 cur=3D58=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring=C2=A0 5: qid=3D5=C2=A0 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring=C2=A0 6: qid=3D6=C2=A0 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring=C2=A0 7: qid=3D7=C2=A0 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring=C2=A0 8: qid=3D8=C2=A0 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring=C2=A0 9: qid=3D9=C2=A0 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring 10: qid=3D10 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring 11: qid=3D11 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring 12: qid=3D12 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring 13: qid=3D13 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring 14: qid=3D14 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring 15: qid=3D15 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring 16: qid=3D16 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring 17: qid=3D17 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring 18: qid=3D18 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 tx ring 19: qid=3D19 cur=3D0=C2=A0=C2=A0 queued=3D0 =C2=A0
=C2=A0 rx ring: cur=3D19
iwn0: iwn_panicked: controller panicked, iv_state =3D 5; restarting
wlan0: link state changed to DOWN
iwn0: iwn_read_firmware: ucode rev=3D0x271f0501
wlan0: link state changed to UP
=C2=A0 =C2=A0
------=_Part_12874_112851790.1478771114219
Content-Type: application/octet-stream; name=dmesg
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=dmesg
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p2 #0: Mon Oct 24 06:55:27 UTC 2016
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT(vga): resolution 640x480
module iwn already present!
CPU: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz (2094.79-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc08e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: (disabled in BIOS) HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4054011904 (3866 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <LENOVO TP-6J >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101c970, 0) error 19
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-6J> on motherboard
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xdfffffff,0xf2100000-0xf210ffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV730 HDA Controller> mem 0xf2110000-0xf2113fff irq 17 at device 0.1 on pci1
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1800-0x181f irq 16 at device 26.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 21 at device 26.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 19 at device 26.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf2604800-0xf2604bff irq 19 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
hdac1: <Intel 82801I HDA Controller> mem 0xf2600000-0xf2603fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
sdhci_pci0: <JMicron JMB38X SD> mem 0xf2300400-0xf23004ff irq 16 at device 0.2 on pci2
sdhci_pci0: 1 slot(s) allocated
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib3: [GIANT-LOCKED]
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib4: [GIANT-LOCKED]
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib5: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib5
iwn0: <Intel Centrino Wireless-N 1000> mem 0xf2200000-0xf2201fff irq 19 at device 0.0 on pci3
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib6: [GIANT-LOCKED]
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib7: [GIANT-LOCKED]
pci4: <ACPI PCI bus> on pcib7
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xf2004000-0xf2004fff,0xf2000000-0xf2003fff irq 17 at device 0.0 on pci4
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: ##:##:##:##:##:##
re0: netmap queues/slots: TX 1/256, RX 1/256
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at device 29.0 on pci0
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 19 at device 29.1 on pci0
usbus5 on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0
usbus6 on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf2604c00-0xf2604fff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9M AHCI SATA controller> port 0x18f0-0x18f7,0x18e4-0x18e7,0x18e8-0x18ef,0x18e0-0x18e3,0x18c0-0x18df mem 0xf2604000-0xf26047ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xd07ff,0xe0000-0xe1fff,0xe2000-0xe37ff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
usbus0: 12Mbps Full Speed USB v1.0
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 18 on hdaa1
pcm2: <Realtek ALC269 (Rear Analog Mic)> at nid 24 on hdaa1
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GT30N LG09> Removable CD-ROM SCSI device
cd0: Serial Number M2QA3LM1856
cd0: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD3200BEVS-08VAT2 14.01A14> ATA8-ACS SATA 1.x device
ada0: Serial Number WD-WXE1A2012178
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors)
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 2094793176 Hz quality 1000
Trying to mount root from ufs:/dev/ada0p2 [rw]...
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen7.2: <Bison> at usbus7
wlan0: Ethernet address: ##:##:##:##:##:##:##
ugen4.2: <Logitech> at usbus4
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 2> on usbus4
kbd2 at ukbd0
iwn0: iwn_read_firmware: ucode rev=0x271f0501
wlan0: link state changed to UP
re0: link state changed to UP
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 2> on usbus4
ums0: 18 buttons and [XYZT] coordinates ID=2
wlan0: link state changed to DOWN
iwn0: device timeout
iwn0: iwn_read_firmware: ucode rev=0x271f0501
iwn0: scan timeout
iwn0: iwn_read_firmware: ucode rev=0x271f0501
wlan0: link state changed to UP
iwn0: iwn_intr: fatal firmware error
firmware error log:
error type = "BAD_COMMAND" (0x00000007)
program counter = 0x000024D8
source line = 0x00000446
error data = 0x0000000000000000
branch link = 0x000024D6000024D6
interrupt link = 0x0000082600000000
time = 8365
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=2 queued=0
tx ring 4: qid=4 cur=58 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=19
iwn0: iwn_panicked: controller panicked, iv_state = 5; restarting
wlan0: link state changed to DOWN
iwn0: iwn_read_firmware: ucode rev=0x271f0501
wlan0: link state changed to UP
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <ATI Mobility Radeon 4500 Series> on vgapci0
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x17AA:0x2129).
info: [drm] register mmio base: 0xF2100000
info: [drm] register mmio size: 65536
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=9553
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM"
info: [drm] radeon_atrm_get_bios: Failed to get "ATRM" handle: AE_NOT_FOUND
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xd0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800d0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0xFFFF
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
info: [drm] ATOM BIOS: BR30919.013
drmn0: info: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
drmn0: info: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
info: [drm] Detected VRAM RAM=256M, BAR=256M
info: [drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 2062528 kiB
[TTM] Initializing pool allocator
info: [drm] radeon: 256M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] MSI enabled 1 message(s)
drmn0: info: radeon: using MSI.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] probing gen 2 caps for device 8086:2a41 = 1/0
info: [drm] Loading RV710 Microcode
info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
drmn0: info: WB enabled
drmn0: info: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0x0xfffff80019e14c00
drmn0: info: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0x0xfffff80019e14c0c
info: [drm] ring test on 0 succeeded in 1 usecs
info: [drm] ring test on 3 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] radeon_device_init: Taking over the fictitious range 0xd0000000-0xe0000000
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb1 addr 0x0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb2 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on iicbb3 addr 0x0
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb4 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on iicbb5 addr 0x0
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb6 addr 0x0
iic6: <I2C generic I/O> on iicbus6
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm] VGA-1
info: [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
info: [drm] Encoders:
info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] Connector 1:
info: [drm] HDMI-A-1
info: [drm] HPD1
info: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
info: [drm] Encoders:
info: [drm] DFP1: INTERNAL_UNIPHY
info: [drm] Connector 2:
info: [drm] LVDS-1
info: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
info: [drm] Encoders:
info: [drm] LCD1: INTERNAL_UNIPHY2
info: [drm] radeon: power management initialized
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.LVDS-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] fb mappable at 0xD0142000
info: [drm] vram apper at 0xD0000000
info: [drm] size 9216000
info: [drm] fb depth is 24
info: [drm] pitch is 7680
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized radeon 2.29.0 20080528 for drmn0 on minor 0
WARNING pid 1371 (python2.7): ioctl sign-extension ioctl ffffffff80087467
WARNING pid 1373 (python2.7): ioctl sign-extension ioctl ffffffff80087467
------=_Part_12874_112851790.1478771114219
Content-Type: text/plain; charset=us-ascii; name=rc.conf
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=rc.conf
hostname="##############"
keymap="german.iso.kbd"
#ifconfig_re0="up"
#ifconfig_iwn0="ether ##:##:##:##:##:##"
wlans_iwn0="wlan0"
ifconfig_wlan0="WPA DHCP"
create_args_wlan0="country DE regdomain ETSI"
#cloned_interfaces="lagg0"
#ifconfig_lagg0="laggproto failover laggport re0 laggport wlan0 DHCP"
sshd_enable="YES"
ntpd_enable="YES"
powerd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
# fuer kde
hald_enable="YES"
dbus_enable="YES"
kdm4_enable="YES"
cupsd_enable="YES"
------=_Part_12874_112851790.1478771114219
Content-Type: text/plain; charset=us-ascii; name=loader.conf
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=loader.conf
kern.vty=vt
if_iwn_load="YES"
iwn1000fw_load="YES"
------=_Part_12874_112851790.1478771114219--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?872975824.12877.1478771114220>