Date: Wed, 16 Oct 2002 16:35:22 +0200 From: Francois E Jaccard <fjaccard@runbox.com> To: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de>, freebsd-stable@freebsd.org Cc: freebsd-hardware@freebsd.org Subject: Re: em0: Intel Pro/1000MT is not working! Message-ID: <5.1.0.14.0.20021016163219.00bde568@node11bis> In-Reply-To: <20021009144810.R32647-100000@klima.physik.uni-mainz.de>
next in thread | previous in thread | raw e-mail | index | archive | help
At 09/10/2002 15:03, Hartmann, O. wrote: >Hello. > >I got a problem with a Intel Pro/1000MT NIC on a FreeBSD 4.7-RC box >(cvsupdated yesterday). > >When booting, kernel reports the following: > >em0: <Intel (R) PRO/1000 Network Connection, Version 1.3.14> at device >16.0 on pci0 >em0: Memory Access and/or Bus Master bits were not set! >em0: Unable to allocate bus resource: memory >em0: Allocation of PCI resources failed >device_probe_and_attach: em0 and attach returned 6 > >The mainboard is a new VIA A7V333 (KT333 chipset), disabled RAID controller. >Also atached: LSI Logic 21040 U160 SCSI controller (also 64 Bit/33 Mhz in 32 >Bit PCI slot). > >I disabled IEEE1394 device by jumper, USB2.0 and the Promise RAID chip, >I tried the Intel PRO/1000MT NIC in each possible PCI slot, but no chance, >it does not work. The I tried to assign an IRQ explicitely by BIOS setting >to a specific PCI slot the NIC resides in. No effect. >Due to the use of SCSI both IDE controllers are disabled, APIC mode is >enabled, >parallel and both serial ports are disbaled, so their IRQs should be free. > >Can anyone help? We plan to order more Intel PRO/1000MT Server Adapters for >all of our FreeBSD boxes. What makes the NIC working improper? > >At this moment I'm sorry not offering dmesg-output, but without a working NIC >it's not possible to offer the whole dmesg output (later!). > >I tried the NIC in a normal PC/Windows 2000 system and it works fine. The only >thing I did not check is whether there is something to switch within the BIOS/ >Firmware of the NIC itself. > >Can anyone help? > >Thanks in advance, >Oliver > >-- >MfG >O. Hartmann > >ohartman@klima.physik.uni-mainz.de >------------------------------------------------------------------ >IT-Administration des Institutes fuer Physik der Atmosphaere (IPA) >------------------------------------------------------------------ >Johannes Gutenberg Universitaet Mainz >Becherweg 21 >55099 Mainz > >Tel: +496131/3924662 (Maschinenraum) >Tel: +496131/3924144 (Buero) >FAX: +496131/3923532 > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-hardware" in the body of the message Hi, I had something similar on one of my boxes. I changed the bios setting "Plug and Play OS" to no so that the bios gives the IRQ to the card and it worked :) The card was a 3Com 3C905B IIRC... Regards, -- Francois Jaccard Public Key: http://keys.pgp.com:11371/pks/lookup?op=get&search=0x11CA35A6 PGP Key Fingerprint:7268 1690 7448 0FE4 0B40 3BD6 E550 CBCE 11CA 35A6 ICQ: 270437 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.0.20021016163219.00bde568>