Date: Wed, 1 May 2002 20:09:56 -0400 (EDT) From: ". ten tacles . ." <tentacles@mail.themuseav.com> To: freebsd-current@FreeBSD.ORG Subject: difficulties with ed driver (was d-link dwl520 wireless pci...) Message-ID: <Pine.LNX.4.21.0205011936220.27911-100000@mail.themuseav.com> In-Reply-To: <Pine.LNX.4.21.0204261905310.21333-100000@mail.themuseav.com>
next in thread | previous in thread | raw e-mail | index | archive | help
i broke down and did a fresh install of the developer's
preview of 5.0 and the wi driver picks up the d-link
wireless card and works like a champ. the catch is that
for some reason the ed driver doesn't seem to want to recognize
my isa ne2000 (compliant) nic. i recompiled the kernel making
sure that "device ed" was specified (along with miibus) and still
no luck. i was thinking it may have been a problem with the network card,
but slackware 8 with kernel 2.4.17 (on a different partition) picked up
the network card just fine (as well as the d-link card, via wlan drivers).
i've gone into the dumb dos setup utility for the network
card at least twenty times, specifying just about every
combination of options (enabled/disabled plug-and-play
and tried a bunch of different port/irq/iomem). i've also
gone into the bios and tried enabling and disabling pnp-OS.
dmesg (used boot -v) doesn't list anything resembling an
isa nic at all, but kldstat -v has if_ed listed in (seemingly)
all the right places. i did specify the pertaining values
in /boot/devices for the ed driver as well.
all this to no avail. i know there's something i've overlooked..
any hints/suggestions? thanks!!!
--tents
On Fri, 26 Apr 2002, . ten tacles . . wrote:
>
> recently acquired a dwl520 and i was wondering
> if there is freebsd support for this card.
> i looked through what appeared to be the pci-support
> portion of the wi driver (if_wi_pci.c ..checked out
> via cvs last night) and i couldn't find a definition of this card:
>
> pci_ids[] = {
> {0x1638, 0x1100, WI_BUS_PCI_PLX, "PRISM2STA PCI WaveLAN/IEEE 802.11"},
> {0x1385, 0x4100, WI_BUS_PCI_PLX, "Netgear MA301 PCI IEEE 802.11b"},
> {0x16ab, 0x1101, WI_BUS_PCI_PLX, "GLPRISM2 PCI WaveLAN/IEEE 802.11"},
> {0x16ab, 0x1102, WI_BUS_PCI_PLX, "Linksys WDT11 PCI IEEE 802.11b"},
> {0x1260, 0x3873, WI_BUS_PCI_NATIVE, "Linksys WMP11 PCI Prism2.5"},
> {0x10b7, 0x7770, WI_BUS_PCI_PLX, "3Com Airconnect IEEE 802.11b"},
> {0x111a, 0x1023, WI_BUS_PCI_PLX, "Siemens SpeedStream IEEE 802.11b"},
> {0, 0, 0, NULL}
>
> this may or may not be indicative of support for this card as far as i
> know (which is not much regarding driver hacking). i compiled the driver
> into the kernel anyways and got this on bootup:
>
> pci0: <unknown card> (vendor=0x1260, dev=0x3873) at 11.0 irq 12
>
> so would anyone happen to know if this card is supported and if so,
> is there a diff/patch/revision that i should get or procedure i should
> follow?
> thanks a bunches!
>
> --tents
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0205011936220.27911-100000>