Date: Mon, 4 Oct 2004 14:06:07 -0700 (PDT) From: George Mitchell <george@m5p.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/72334: FreeBSD 5.3 Beta6 and Beta7 carsh on boot Message-ID: <200410042106.i94L67Eo010657@m5p.com> Resent-Message-ID: <200410042110.i94LAT5W026746@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 72334 >Category: i386 >Synopsis: FreeBSD 5.3 Beta6 and Beta7 carsh on boot >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Oct 04 21:10:28 GMT 2004 >Closed-Date: >Last-Modified: >Originator: George Mitchell >Release: FreeBSD 5.3-BETA(6|7) i386 >Organization: >Environment: System: FreeBSD 5.3 BETA7 boot-only ISO downloaded from ftp.freebsd.org Motherboard: FIC VA-503+ Here's a dmesg from 5.2, which currently runs just fine: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a07000. Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc0a071f4. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0a072a4. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 536805376 (511 MB) avail memory = 511766528 (488 MB) K6-family MTRR support enabled (2 registers) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00fdd50 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci_cfgintr: 0:7 INTD BIOS irq 9 pci_cfgintr: 0:9 INTA BIOS irq 10 pci_cfgintr: 0:10 INTA BIOS irq 7 agp0: <VIA 82C597 (Apollo VP3) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C586B UDMA33 controller> port 0xe400-0xe40f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 9 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib2: <PCI-PCI bridge> at device 7.3 on pci0 pcm0: <Creative CT5880-C> port 0xe800-0xe83f irq 10 at device 9.0 on pci0 pcm0: <TriTech TR28602 AC97 Codec> rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xf3000000-0xf30000ff irq 7 at device 10.0 on pci0 rl0: Ethernet address: 00:50:22:96:d3:6c miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcc7ff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fd1: <1200-KB 5.25" drive> on fdc0 drive 1 ppc0: <Parallel port> at port 0x278-0x27f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 aha1 at port 0x330-0x333 irq 11 drq 5 on isa0 aha1: AHA-1542CF FW Rev. C.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs unknown: <PNP0303> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) Timecounter "TSC" frequency 501139086 Hz quality 800 Timecounters tick every 10.000 msec GEOM: create disk ad0 dp=0xc4878060 ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA33 acd0: DVDROM <DVD-ROM OEM316B> at ata1-master PIO4 Waiting 15 seconds for SCSI devices to settle GEOM: create disk da0 dp=0xc48fc850 GEOM: create disk da1 dp=0xc48d4c50 GEOM: create disk da2 dp=0xc48d4850 da0 at aha1 bus 0 target 1 lun 0 da0: <CONNER CFP1060E LKM1.05 2035> Fixed Direct Access SCSI-2 device da0: 3.300MB/s transfers da0: 1001MB (2050801 512 byte sectors: 64H 32S/T 1001C) da1 at aha1 bus 0 target 2 lun 0 da1: <CONNER CFP1060S SUN1.05 245C> Fixed Direct Access SCSI-2 device da1: 3.300MB/s transfers da1: 1010MB (2070400 512 byte sectors: 64H 32S/T 1010C) da2 at aha1 bus 0 target 6 lun 0 da2: <IOMEGA ZIP 100 D.06> Removable Direct Access SCSI-2 device da2: 3.300MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present (da2:aha1:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:aha1:0:6:0): CAM Status: SCSI Status Error (da2:aha1:0:6:0): SCSI Status: Check Condition (da2:aha1:0:6:0): NOT READY asc:3a,0 (da2:aha1:0:6:0): Medium not present (da2:aha1:0:6:0): Unretryable error Opened disk da2 -> 6 (da2:aha1:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:aha1:0:6:0): CAM Status: SCSI Status Error (da2:aha1:0:6:0): SCSI Status: Check Condition (da2:aha1:0:6:0): NOT READY asc:3a,0 (da2:aha1:0:6:0): Medium not present (da2:aha1:0:6:0): Unretryable error Opened disk da2 -> 6 Mounting root from ufs:/dev/ad0s2a >Description: FreeBSD 5.3-BETA6 or BETA7 crashes immediately upon booting >How-To-Repeat: Burn a CD with BETA7 boot-only ISO image. Insert CD into drive. Boot. Within one or two seconds after the 15 second SCSI settling delay, system gets a fatal trap 12: Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x3c fault code = supervisor write, page not present instruction pinter = 0x8:0xc05d69ad stack pointer = 0x10:0xd4424ce4 frame pointer = 0x10:0xd4424ce8 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 2 (g_event) trap number = 12 panic: page fault cpuid = 0 Uptime: 17s >Fix: You tell me. Is there something that needs to get updated in th aha driver? At the time of the panic, the tail end of some text which just scrolled off the screen seems to indicate problems scanning the SCSI bus. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200410042106.i94L67Eo010657>