Date: Sun, 26 Nov 2006 23:10:13 GMT From: puc-uart@oldach.net (Helge Oldach) To: freebsd-i386@FreeBSD.org Subject: Re: i386/105616: UART PCI device just silent... Message-ID: <200611262310.kAQNADBB016434@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/105616; it has been noted by GNATS.
From: puc-uart@oldach.net (Helge Oldach)
To: xcllnt@mac.com (Marcel Moolenaar)
Cc: FreeBSD-gnats-submit@FreeBSD.org
Subject: Re: i386/105616: UART PCI device just silent...
Date: Mon, 27 Nov 2006 00:00:42 +0100 (CET)
--ELM82590640;-1539-0_
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Hi Marcel,
>> The "sysctl dev" delta between a "sio kernel" and an "uart kernel" is:
>>
>> 107,124c107,118
>> < dev.sio.4.%desc: Dolphin Peripherals 4036
>> < dev.sio.4.%driver: sio
>> < dev.sio.4.%parent: puc0
>> < dev.sio.5.%desc: Dolphin Peripherals 4036
>> < dev.sio.5.%driver: sio
>> < dev.sio.5.%parent: puc0
>> < dev.sio.0.%desc: Standard PC COM port
>> < dev.sio.0.%driver: sio
>> < dev.sio.0.%location: handle=\_SB_.PCI0.IBRG.COM1
>> < dev.sio.0.%pnpinfo: _HID=PNP0501 _UID=1
>> < dev.sio.0.%parent: acpi0
>> < dev.sio.0.wake: 0
>> < dev.sio.1.%desc: Standard PC COM port
>> < dev.sio.1.%driver: sio
>> < dev.sio.1.%location: handle=\_SB_.PCI0.IBRG.COM2
>> < dev.sio.1.%pnpinfo: _HID=PNP0501 _UID=2
>> < dev.sio.1.%parent: acpi0
>> < dev.sio.1.wake: 0
>> ---
>>> dev.uart.2.%desc: 16550 or compatible
>>> dev.uart.2.%driver: uart
>>> dev.uart.2.%parent: puc0
>>> dev.uart.3.%desc: 16550 or compatible
>>> dev.uart.3.%driver: uart
>>> dev.uart.3.%parent: puc0
>>> dev.uart.0.%desc: 16550 or compatible
>>> dev.uart.0.%driver: uart
>>> dev.uart.0.%parent: isa0
>>> dev.uart.1.%desc: 16550 or compatible
>>> dev.uart.1.%driver: uart
>>> dev.uart.1.%parent: isa0
>>
>> Maybe this gives some hint?
>
>One thing that strikes me as odd is that sio(4) attaches to acpi(4),
>while uart(4) attaches to isa(4).
Yes. That is indeed the reason why I send you this. But maybe it's just
harmless.
>While this has nothing to do with puc(4), I'd like to know why this
>is happening. Could you send me a verbose dmesg of both kernels?
Please see attached the kernel configs and verbose debugs. You will see
that the kernel configs are both based on GENERIC with a lot of unused
devices being explicitely disabled. This saves som 1.5 MB kernel space.
Otehrwise the delta between the two currently is:
--- /sys/i386/conf/HMO Thu Aug 31 16:53:24 2006
+++ /sys/i386/conf/HMO-UART Thu Nov 16 00:00:00 2006
@@ -134,7 +134,6 @@
options IPFIREWALL_FORWARD #packet destination changes
device puc
-options PUC_FASTINTR
#options IPSEC #IP security
#options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
@@ -142,3 +141,8 @@
#options IPSEC_FILTERGIF #filter ipsec packets from a tunnel
device crypto # core crypto support
options FAST_IPSEC #new IPsec (cannot define w/ IPSEC)
+
+nodevice sio # 8250, 16[45]50 based serial ports
+# uart: newbusified driver for serial interfaces. It consolidates the sio(4),
+# sab(4) and zs(4) drivers.
+device uart
Regards,
Helge
--ELM82590640;-1539-0_
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=HMO
Content-Description: /sys/i386/conf/HMO
Content-Transfer-Encoding: 7bit
include GENERIC
nodevice ahb # EISA AHA1742 family
nodevice ahc # AHA2940 and onboard AIC7xxx devices
nodevice ahd # AHA39320/29320 and onboard AIC79xx devices
nodevice amd # AMD 53C974 (Tekram DC-390(T))
nodevice isp # Qlogic family
nodevice mpt # LSI-Logic MPT-Fusion
nodevice sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
nodevice trm # Tekram DC395U/UW/F DC315U adapters
nodevice adv # Advansys SCSI adapters
nodevice adw # Advansys wide SCSI adapters
nodevice aha # Adaptec 154x SCSI adapters
nodevice aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
nodevice bt # Buslogic/Mylex MultiMaster SCSI adapters
nodevice ncv # NCR 53C500
nodevice nsp # Workbit Ninja SCSI-3
nodevice stg # TMC 18C30/18C50
nodevice amr # AMI MegaRAID
nodevice arcmsr # Areca SATA II RAID
nodevice asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
nodevice ciss # Compaq Smart RAID 5*
nodevice dpt # DPT Smartcache III, IV - See NOTES for options
nodevice hptmv # Highpoint RocketRAID 182x
nodevice rr232x # Highpoint RocketRAID 232x
nodevice iir # Intel Integrated RAID
nodevice ips # IBM (Adaptec) ServeRAID
nodevice mly # Mylex AcceleRAID/eXtremeRAID
nodevice twa # 3ware 9000 series PATA/SATA RAID
nodevice aac # Adaptec FSA RAID
nodevice aacp # SCSI passthrough for aac (requires CAM)
nodevice ida # Compaq Smart RAID
nodevice mfi # LSI MegaRAID SAS
nodevice mlx # Mylex DAC960 family
nodevice pst # Promise Supertrak SX6000
nodevice twe # 3ware ATA RAID
nodevice cbb # cardbus (yenta) bridge
nodevice pccard # PC Card (16-bit) bus
nodevice cardbus # CardBus (32-bit) bus
nodevice plip # TCP/IP over parallel
nodevice de # DEC/Intel DC21x4x (``Tulip'')
nodevice em # Intel PRO/1000 adapter Gigabit Ethernet Card
nodevice ixgb # Intel PRO/10GbE Ethernet Card
nodevice txp # 3Com 3cR990 (``Typhoon'')
nodevice vx # 3Com 3c590, 3c595 (``Vortex'')
nodevice bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
nodevice bfe # Broadcom BCM440x 10/100 Ethernet
nodevice bge # Broadcom BCM570xx Gigabit Ethernet
nodevice dc # DEC/Intel 21143 and various workalikes
nodevice fxp # Intel EtherExpress PRO/100B (82557, 82558)
nodevice lge # Level 1 LXT1001 gigabit ethernet
nodevice nge # NatSemi DP83820 gigabit ethernet
nodevice nve # nVidia nForce MCP on-board Ethernet Networking
nodevice pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
nodevice re # RealTek 8139C+/8169/8169S/8110S
nodevice rl # RealTek 8129/8139
nodevice sf # Adaptec AIC-6915 (``Starfire'')
nodevice sis # Silicon Integrated Systems SiS 900/SiS 7016
nodevice sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
nodevice ste # Sundance ST201 (D-Link DFE-550TX)
nodevice stge # Sundance/Tamarack TC9021 gigabit Ethernet
nodevice ti # Alteon Networks Tigon I/II gigabit Ethernet
nodevice tl # Texas Instruments ThunderLAN
nodevice tx # SMC EtherPower II (83c170 ``EPIC'')
nodevice vge # VIA VT612x gigabit ethernet
nodevice vr # VIA Rhine, Rhine II
nodevice wb # Winbond W89C840F
nodevice xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
nodevice cs # Crystal Semiconductor CS89x0 NIC
nodevice ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
nodevice ex # Intel EtherExpress Pro/10 and Pro/10+
nodevice ep # Etherlink III based cards
nodevice fe # Fujitsu MB8696x based cards
nodevice ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
nodevice lnc # NE2100, NE32-VL Lance Ethernet cards
nodevice sn # SMC's 9000 series of Ethernet chips
nodevice xe # Xircom pccard Ethernet
nodevice wlan # 802.11 support
nodevice wlan_wep # 802.11 WEP support
nodevice wlan_ccmp # 802.11 CCMP support
nodevice wlan_tkip # 802.11 TKIP support
nodevice an # Aironet 4500/4800 802.11 wireless NICs.
nodevice ath # Atheros pci/cardbus NIC's
nodevice ath_hal # Atheros HAL (Hardware Access Layer)
nodevice ath_rate_sample # SampleRate tx rate control for ath
nodevice awi # BayStack 660 and others
nodevice ral # Ralink Technology RT2500 wireless NICs.
nodevice wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
nodevice sl # Kernel SLIP
nodevice ppp # Kernel PPP
nodevice tun # Packet tunnel.
nodevice md # Memory "disks"
nodevice gif # IPv6 and IPv4 tunneling
nodevice faith # IPv6-to-IPv4 relaying (translation)
nodevice uhci # UHCI PCI->USB interface
nodevice ohci # OHCI PCI->USB interface
nodevice ehci # EHCI PCI->USB interface (USB 2.0)
nodevice usb # USB Bus (required)
nodevice ugen # Generic
nodevice uhid # "Human Interface Devices"
nodevice ukbd # Keyboard
nodevice ulpt # Printer
nodevice umass # Disks/Mass storage - Requires scbus and da
nodevice ums # Mouse
nodevice ural # Ralink Technology RT2500USB wireless NICs
nodevice urio # Diamond Rio 500 MP3 player
nodevice uscanner # Scanners
nodevice aue # ADMtek USB Ethernet
nodevice axe # ASIX Electronics USB Ethernet
nodevice cdce # Generic USB over Ethernet
nodevice cue # CATC USB Ethernet
nodevice kue # Kawasaki LSI USB Ethernet
nodevice rue # RealTek RTL8150 USB Ethernet
nodevice firewire # FireWire bus code
nodevice sbp # SCSI over FireWire (Requires scbus and da)
nodevice fwe # Ethernet over FireWire (non-standard!)
nooption NFSCLIENT # Network Filesystem Client
nooption NFSSERVER # Network Filesystem Server
nooption NFS_ROOT # NFS usable as /, requires NFSCLIENT
nooption MSDOSFS # MSDOS Filesystem
nooption CD9660 # ISO 9660 Filesystem
nooption PROCFS # Process filesystem (requires PSEUDOFS)
nooption PSEUDOFS # Pseudo-filesystem framework
options IPFIREWALL #firewall
options IPFIREWALL_FORWARD #packet destination changes
device puc
options PUC_FASTINTR
#options IPSEC #IP security
#options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
#options IPSEC_DEBUG #debug for IP security
#options IPSEC_FILTERGIF #filter ipsec packets from a tunnel
device crypto # core crypto support
options FAST_IPSEC #new IPsec (cannot define w/ IPSEC)
--ELM82590640;-1539-0_
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=HMO.dmesg
Content-Description: /tmp/HMO.dmesg
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-615 #0: Mon Nov 20 15:58:20 CET 2006
toor@sep.oldach.net:/usr/obj/usr/src/sys/HMO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08a3000.
Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc08a30cc.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08a3178.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08a3224.
Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc08a32d0.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc08a337c.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc08a3428.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc08a34d4.
Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08a357c.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc08a3628.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08a36d4.
Preloaded elf module "/boot/kernel/cbb.ko" at 0xc08a3780.
Preloaded elf module "/boot/kernel/exca.ko" at 0xc08a3828.
Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08a38d4.
Preloaded elf module "/boot/kernel/sym.ko" at 0xc08a3980.
Preloaded elf module "/boot/kernel/uplcom.ko" at 0xc08a3a28.
Preloaded elf module "/boot/kernel/ucom.ko" at 0xc08a3ad4.
Preloaded elf module "/boot/kernel/uvisor.ko" at 0xc08a3b80.
Preloaded elf module "/boot/kernel/wlan_wep.ko" at 0xc08a3c2c.
Preloaded elf module "/boot/kernel/if_bridge.ko" at 0xc08a3cdc.
Calibrating clock(s) ... i8254 clock: 1193072 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 646666138 Hz
CPU: Intel Pentium III (646.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 402653184 (384 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x00000000178fcfff, 382566400 bytes (93400 pages)
avail memory = 384528384 (366 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xec700 (c00ec700) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xec700+0x11a0
pnpbios: Found PnP BIOS data at 0xc00f7db0
pnpbios: Entry = f0000:6480 Rev = 1.0
pnpbios: OEM ID b5b0110e
Other BIOS signatures found:
wlan: <802.11 Link Layer>
crypto: <crypto core>
random: <entropy source, Software, Yarrow>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
npx0: INT 16 interface
acpi0: <COMPAQ CPQB0B5> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00edd10
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 13 A 0x60 3 4 5 6 7 9 10 11
slot 1 0 13 B 0x61 3 4 5 6 7 9 10 11
slot 1 0 13 C 0x62 3 4 5 6 7 9 10 11
slot 1 0 13 D 0x63 3 4 5 6 7 9 10 11
slot 2 0 14 A 0x61 3 4 5 6 7 9 10 11
slot 2 0 14 B 0x62 3 4 5 6 7 9 10 11
slot 2 0 14 C 0x63 3 4 5 6 7 9 10 11
slot 2 0 14 D 0x60 3 4 5 6 7 9 10 11
slot 3 0 15 A 0x62 3 4 5 6 7 9 10 11
slot 3 0 15 B 0x63 3 4 5 6 7 9 10 11
slot 3 0 15 C 0x60 3 4 5 6 7 9 10 11
slot 3 0 15 D 0x61 3 4 5 6 7 9 10 11
slot 4 0 16 A 0x63 3 4 5 6 7 9 10 11
slot 4 0 16 B 0x60 3 4 5 6 7 9 10 11
slot 4 0 16 C 0x61 3 4 5 6 7 9 10 11
slot 4 0 16 D 0x62 3 4 5 6 7 9 10 11
slot 5 0 18 A 0x61 3 4 5 6 7 9 10 11
slot 5 0 18 B 0x62 3 4 5 6 7 9 10 11
slot 5 0 18 C 0x63 3 4 5 6 7 9 10 11
slot 5 0 18 D 0x60 3 4 5 6 7 9 10 11
embedded 0 12 A 0x60 3 4 5 6 7 9 10 11
embedded 0 12 B 0x61 3 4 5 6 7 9 10 11
embedded 0 12 C 0x62 3 4 5 6 7 9 10 11
embedded 0 12 D 0x63 3 4 5 6 7 9 10 11
embedded 0 20 D 0x63 3 4 5 6 7 9 10 11
embedded 0 1 A 0x62 3 4 5 6 7 9 10 11
embedded 0 1 B 0x63 3 4 5 6 7 9 10 11
embedded 0 11 A 0x61 3 4 5 6 7 9 10 11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 20 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 20 func 2
acpi0: wakeup code va 0xca4b3000 pa 0x9e000
atpic: Programming IRQ9 as level/low
acpi: bad write to port 0x070 (8), val 0x31
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x30
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x31
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x30
acpi: bad read from port 0x071 (8)
ACPI timer: 0/4 0/3 0/4 0/5 0/4 0/3 0/3 0/4 0/3 0/4 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0xf810
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.13.INTA at func 0: 11
ACPI: Found matching pin for 0.14.INTA at func 0: 10
ACPI: Found matching pin for 0.15.INTA at func 0: 11
ACPI: Found matching pin for 0.16.INTA at func 0: 255
ACPI: Found matching pin for 0.20.INTD at func 2: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x3210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base 44000000, size 26, enabled
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 41300000, size 12, enabled
map[14]: type 4, range 32, base 00002040, size 6, enabled
map[18]: type 1, range 32, base 41200000, size 20, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.LNKA:0)
pcib0: slot 13 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x1409, dev=0x7168, revid=0x01
bus=0, slot=14, func=0
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0081, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type 4, range 32, base 00002000, size 5, enabled
pcib0: matched entry for 0.14.INTA (src \\_SB_.LNKB:0)
pcib0: slot 14 INTA routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x1000, dev=0x0001, revid=0x02
bus=0, slot=15, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 1, range 32, base 41100000, size 8, enabled
pcib0: matched entry for 0.15.INTA (src \\_SB_.LNKC:0)
pcib0: slot 15 INTA routed to irq 11 via \\_SB_.LNKC
found-> vendor=0x104c, dev=0xac1e, revid=0x00
bus=0, slot=16, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0004, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=20, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=20, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 000020e0, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=20, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type 4, range 32, base 000020c0, size 5, enabled
pcib0: matched entry for 0.20.INTD (src \\_SB_.LNKD:0)
pcib0: slot 20 INTD routed to irq 11 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=20, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 0000fc00, size 4, enabled
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x44000000-0x47ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x44000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x1000-0x1fff
pcib1: memory decode 0x40000000-0x410fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4742, revid=0x5c
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base 40000000, size 24, enabled
pcib1: (null) requested memory range 0x40000000-0x40ffffff: good
map[14]: type 4, range 32, base 00001000, size 8, enabled
pcib1: (null) requested I/O range 0x1000-0x10ff: in range
map[18]: type 1, range 32, base 41000000, size 12, enabled
pcib1: (null) requested memory range 0x41000000-0x41000fff: good
pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKC:0)
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.LNKC
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2040-0x207f mem 0x41300000-0x41300fff,0x41200000-0x412fffff irq 11 at device 13.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41300000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000e 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:90:27:88:10:e6
fxp0: [MPSAFE]
puc0: <Dolphin Peripherals 4036> port 0x2000-0x201f irq 10 at device 14.0 on pci0
puc0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x2000
sio4: <Dolphin Peripherals 4036> on puc0
sio4: type 16550A
sio5: <Dolphin Peripherals 4036> on puc0
sio5: type 16550A
sym0: <810> port 0x2400-0x24ff mem 0x41100000-0x411000ff irq 11 at device 15.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x41100000
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: [GIANT-LOCKED]
cbb0: <TI1211 PCI-CardBus Bridge> at device 16.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.16.INTA (src \\_SB_.LNKD:0)
pcib0: slot 16 INTA routed to irq 11 via \\_SB_.LNKD
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac1e104c 0x02100007 0x06070000 0x00024208
0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x00000000 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0044b060 0x00000000 0x00000000 0x00000022
0x90: 0x616600c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00c00000 0x0000000b 0x0000001f
0xb0: 0x09000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20e0-0x20ef at device 20.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x20e0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x52 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=52 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=50
ata1: stat0=0x00 err=0x50 lsb=0x00 msb=0x00
ata1: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=50 devices=0x2<ATA_SLAVE>
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x20c0-0x20df irq 11 at device 20.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20c0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 20.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:08, syncbits:00
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sbc0: <ESS ES1869> port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on acpi0
sbc0: [GIANT-LOCKED]
pcm0: <ESS 18xx DSP> on sbc0
pcm0: ESS1869 detected, newspeed
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap ff4000, 1000; 0xd52b4000 -> ff4000
pcm0: sndbuf_setmap ff3000, 1000; 0xd52b5000 -> ff3000
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xe0000-0xe7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ugen0: vendor 0x05a9 product 0xa511, rev 1.00/1.00, addr 2
uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.08, addr 3
uhub1: 4 ports with 4 removable, self powered
ucom0: vendor 0x067b product 0x2303, rev 1.10/2.02, addr 4
Device configuration finished.
Timecounter "TSC" frequency 646666138 Hz quality 800
Timecounters tick every 1.000 msec
crypto: assign driver 0, flags 6
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
Fast IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging disabled
lo0: bpf attached
pccard0: CIS version PC Card Standard 5.0
pccard0: CIS info: LG, 11Mbps Wireless LAN PCI Card, Version 01.02,
pccard0: Manufacturer code 0x156, product 0x2
pccard0: function 0: network adapter, ccr addr 3e0 mask 1
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16
wi0: <LG 11Mbps Wireless LAN PCI Card> at port 0x100-0x13f irq 11 function 0 config 1 on pccard0
wi0: [MPSAFE]
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9)
wi0: bpf attached
wi0: Ethernet address: 00:04:47:50:15:3a
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad0: setting PIO4 on PIIX4 chip
ad0: setting UDMA33 on PIIX4 chip
ad0: 19595MB <MAXTOR 6L020L1 A93.0500> at ata0-master UDMA33
ad0: 40132503 sectors [42468C/15H/63S] 16 sectors/interrupt 1 depth queue
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad3: setting PIO4 on PIIX4 chip
ad3: setting UDMA33 on PIIX4 chip
ad3: 19470MB <IC35L020AVER07 0 ER2OA45A> at ata1-slave UDMA33
ad3: 39876480 sectors [42197C/15H/63S] 16 sectors/interrupt 1 depth queue
ad3: Intel check1 failed
ad3: Adaptec check1 failed
ad3: LSI (v3) check1 failed
ad3: LSI (v2) check1 failed
ad3: FreeBSD check1 failed
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(probe3:sym0:0:3:0): Retrying Command
(probe3:sym0:0:3:0): error 22
(probe3:sym0:0:3:0): Unretryable Error
pass0 at sym0 bus 0 target 3 lun 0
pass0: <TOSHIBA CD-ROM XM-5201TA 3014> Removable CD-ROM SCSI-2 device
pass0: 4.237MB/s transfers (4.237MHz, offset 8)
ATA PseudoRAID loaded
(cd0:sym0:0:3:0): Retrying Command
cd0 at sym0 bus 0 target 3 lun 0
cd0: <TOSHIBA CD-ROM XM-5201TA 3014> Removable CD-ROM SCSI-2 device
cd0: 4.237MB/s transfers (4.237MHz, offset 8)
cd0: cd present [296339 x 2048 byte records]
GEOM: new disk ad0
GEOM: new disk ad3
GEOM: new disk cd0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
--ELM82590640;-1539-0_
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=HMO-UART
Content-Description: /sys/i386/conf/HMO-UART
Content-Transfer-Encoding: 7bit
include GENERIC
nodevice ahb # EISA AHA1742 family
nodevice ahc # AHA2940 and onboard AIC7xxx devices
nodevice ahd # AHA39320/29320 and onboard AIC79xx devices
nodevice amd # AMD 53C974 (Tekram DC-390(T))
nodevice isp # Qlogic family
nodevice mpt # LSI-Logic MPT-Fusion
nodevice sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
nodevice trm # Tekram DC395U/UW/F DC315U adapters
nodevice adv # Advansys SCSI adapters
nodevice adw # Advansys wide SCSI adapters
nodevice aha # Adaptec 154x SCSI adapters
nodevice aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
nodevice bt # Buslogic/Mylex MultiMaster SCSI adapters
nodevice ncv # NCR 53C500
nodevice nsp # Workbit Ninja SCSI-3
nodevice stg # TMC 18C30/18C50
nodevice amr # AMI MegaRAID
nodevice arcmsr # Areca SATA II RAID
nodevice asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
nodevice ciss # Compaq Smart RAID 5*
nodevice dpt # DPT Smartcache III, IV - See NOTES for options
nodevice hptmv # Highpoint RocketRAID 182x
nodevice rr232x # Highpoint RocketRAID 232x
nodevice iir # Intel Integrated RAID
nodevice ips # IBM (Adaptec) ServeRAID
nodevice mly # Mylex AcceleRAID/eXtremeRAID
nodevice twa # 3ware 9000 series PATA/SATA RAID
nodevice aac # Adaptec FSA RAID
nodevice aacp # SCSI passthrough for aac (requires CAM)
nodevice ida # Compaq Smart RAID
nodevice mfi # LSI MegaRAID SAS
nodevice mlx # Mylex DAC960 family
nodevice pst # Promise Supertrak SX6000
nodevice twe # 3ware ATA RAID
nodevice cbb # cardbus (yenta) bridge
nodevice pccard # PC Card (16-bit) bus
nodevice cardbus # CardBus (32-bit) bus
nodevice plip # TCP/IP over parallel
nodevice de # DEC/Intel DC21x4x (``Tulip'')
nodevice em # Intel PRO/1000 adapter Gigabit Ethernet Card
nodevice ixgb # Intel PRO/10GbE Ethernet Card
nodevice txp # 3Com 3cR990 (``Typhoon'')
nodevice vx # 3Com 3c590, 3c595 (``Vortex'')
nodevice bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
nodevice bfe # Broadcom BCM440x 10/100 Ethernet
nodevice bge # Broadcom BCM570xx Gigabit Ethernet
nodevice dc # DEC/Intel 21143 and various workalikes
nodevice fxp # Intel EtherExpress PRO/100B (82557, 82558)
nodevice lge # Level 1 LXT1001 gigabit ethernet
nodevice nge # NatSemi DP83820 gigabit ethernet
nodevice nve # nVidia nForce MCP on-board Ethernet Networking
nodevice pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
nodevice re # RealTek 8139C+/8169/8169S/8110S
nodevice rl # RealTek 8129/8139
nodevice sf # Adaptec AIC-6915 (``Starfire'')
nodevice sis # Silicon Integrated Systems SiS 900/SiS 7016
nodevice sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
nodevice ste # Sundance ST201 (D-Link DFE-550TX)
nodevice stge # Sundance/Tamarack TC9021 gigabit Ethernet
nodevice ti # Alteon Networks Tigon I/II gigabit Ethernet
nodevice tl # Texas Instruments ThunderLAN
nodevice tx # SMC EtherPower II (83c170 ``EPIC'')
nodevice vge # VIA VT612x gigabit ethernet
nodevice vr # VIA Rhine, Rhine II
nodevice wb # Winbond W89C840F
nodevice xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
nodevice cs # Crystal Semiconductor CS89x0 NIC
nodevice ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
nodevice ex # Intel EtherExpress Pro/10 and Pro/10+
nodevice ep # Etherlink III based cards
nodevice fe # Fujitsu MB8696x based cards
nodevice ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
nodevice lnc # NE2100, NE32-VL Lance Ethernet cards
nodevice sn # SMC's 9000 series of Ethernet chips
nodevice xe # Xircom pccard Ethernet
nodevice wlan # 802.11 support
nodevice wlan_wep # 802.11 WEP support
nodevice wlan_ccmp # 802.11 CCMP support
nodevice wlan_tkip # 802.11 TKIP support
nodevice an # Aironet 4500/4800 802.11 wireless NICs.
nodevice ath # Atheros pci/cardbus NIC's
nodevice ath_hal # Atheros HAL (Hardware Access Layer)
nodevice ath_rate_sample # SampleRate tx rate control for ath
nodevice awi # BayStack 660 and others
nodevice ral # Ralink Technology RT2500 wireless NICs.
nodevice wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
nodevice sl # Kernel SLIP
nodevice ppp # Kernel PPP
nodevice tun # Packet tunnel.
nodevice md # Memory "disks"
nodevice gif # IPv6 and IPv4 tunneling
nodevice faith # IPv6-to-IPv4 relaying (translation)
nodevice uhci # UHCI PCI->USB interface
nodevice ohci # OHCI PCI->USB interface
nodevice ehci # EHCI PCI->USB interface (USB 2.0)
nodevice usb # USB Bus (required)
nodevice ugen # Generic
nodevice uhid # "Human Interface Devices"
nodevice ukbd # Keyboard
nodevice ulpt # Printer
nodevice umass # Disks/Mass storage - Requires scbus and da
nodevice ums # Mouse
nodevice ural # Ralink Technology RT2500USB wireless NICs
nodevice urio # Diamond Rio 500 MP3 player
nodevice uscanner # Scanners
nodevice aue # ADMtek USB Ethernet
nodevice axe # ASIX Electronics USB Ethernet
nodevice cdce # Generic USB over Ethernet
nodevice cue # CATC USB Ethernet
nodevice kue # Kawasaki LSI USB Ethernet
nodevice rue # RealTek RTL8150 USB Ethernet
nodevice firewire # FireWire bus code
nodevice sbp # SCSI over FireWire (Requires scbus and da)
nodevice fwe # Ethernet over FireWire (non-standard!)
nooption NFSCLIENT # Network Filesystem Client
nooption NFSSERVER # Network Filesystem Server
nooption NFS_ROOT # NFS usable as /, requires NFSCLIENT
nooption MSDOSFS # MSDOS Filesystem
nooption CD9660 # ISO 9660 Filesystem
nooption PROCFS # Process filesystem (requires PSEUDOFS)
nooption PSEUDOFS # Pseudo-filesystem framework
options IPFIREWALL #firewall
options IPFIREWALL_FORWARD #packet destination changes
device puc
#options IPSEC #IP security
#options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
#options IPSEC_DEBUG #debug for IP security
#options IPSEC_FILTERGIF #filter ipsec packets from a tunnel
device crypto # core crypto support
options FAST_IPSEC #new IPsec (cannot define w/ IPSEC)
nodevice sio # 8250, 16[45]50 based serial ports
# uart: newbusified driver for serial interfaces. It consolidates the sio(4),
# sab(4) and zs(4) drivers.
device uart
--ELM82590640;-1539-0_
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=HMO-UART.dmesg
Content-Description: /tmp/HMO-UART.dmesg
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-615 #0: Mon Nov 20 16:43:26 CET 2006
toor@sep.oldach.net:/usr/obj/usr/src/sys/HMO-UART
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08a7000.
Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc08a70cc.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08a7178.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08a7224.
Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc08a72d0.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc08a737c.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc08a7428.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc08a74d4.
Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08a757c.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc08a7628.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08a76d4.
Preloaded elf module "/boot/kernel/cbb.ko" at 0xc08a7780.
Preloaded elf module "/boot/kernel/exca.ko" at 0xc08a7828.
Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08a78d4.
Preloaded elf module "/boot/kernel/sym.ko" at 0xc08a7980.
Preloaded elf module "/boot/kernel/uplcom.ko" at 0xc08a7a28.
Preloaded elf module "/boot/kernel/ucom.ko" at 0xc08a7ad4.
Preloaded elf module "/boot/kernel/uvisor.ko" at 0xc08a7b80.
Preloaded elf module "/boot/kernel/wlan_wep.ko" at 0xc08a7c2c.
Preloaded elf module "/boot/kernel/if_bridge.ko" at 0xc08a7cdc.
Calibrating clock(s) ... i8254 clock: 1193072 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 646665859 Hz
CPU: Intel Pentium III (646.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 402653184 (384 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x00000000178fcfff, 382566400 bytes (93400 pages)
avail memory = 384528384 (366 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xec700 (c00ec700) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xec700+0x11a0
pnpbios: Found PnP BIOS data at 0xc00f7db0
pnpbios: Entry = f0000:6480 Rev = 1.0
pnpbios: OEM ID b5b0110e
Other BIOS signatures found:
wlan: <802.11 Link Layer>
crypto: <crypto core>
random: <entropy source, Software, Yarrow>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
npx0: INT 16 interface
acpi0: <COMPAQ CPQB0B5> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00edd10
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 13 A 0x60 3 4 5 6 7 9 10 11
slot 1 0 13 B 0x61 3 4 5 6 7 9 10 11
slot 1 0 13 C 0x62 3 4 5 6 7 9 10 11
slot 1 0 13 D 0x63 3 4 5 6 7 9 10 11
slot 2 0 14 A 0x61 3 4 5 6 7 9 10 11
slot 2 0 14 B 0x62 3 4 5 6 7 9 10 11
slot 2 0 14 C 0x63 3 4 5 6 7 9 10 11
slot 2 0 14 D 0x60 3 4 5 6 7 9 10 11
slot 3 0 15 A 0x62 3 4 5 6 7 9 10 11
slot 3 0 15 B 0x63 3 4 5 6 7 9 10 11
slot 3 0 15 C 0x60 3 4 5 6 7 9 10 11
slot 3 0 15 D 0x61 3 4 5 6 7 9 10 11
slot 4 0 16 A 0x63 3 4 5 6 7 9 10 11
slot 4 0 16 B 0x60 3 4 5 6 7 9 10 11
slot 4 0 16 C 0x61 3 4 5 6 7 9 10 11
slot 4 0 16 D 0x62 3 4 5 6 7 9 10 11
slot 5 0 18 A 0x61 3 4 5 6 7 9 10 11
slot 5 0 18 B 0x62 3 4 5 6 7 9 10 11
slot 5 0 18 C 0x63 3 4 5 6 7 9 10 11
slot 5 0 18 D 0x60 3 4 5 6 7 9 10 11
embedded 0 12 A 0x60 3 4 5 6 7 9 10 11
embedded 0 12 B 0x61 3 4 5 6 7 9 10 11
embedded 0 12 C 0x62 3 4 5 6 7 9 10 11
embedded 0 12 D 0x63 3 4 5 6 7 9 10 11
embedded 0 20 D 0x63 3 4 5 6 7 9 10 11
embedded 0 1 A 0x62 3 4 5 6 7 9 10 11
embedded 0 1 B 0x63 3 4 5 6 7 9 10 11
embedded 0 11 A 0x61 3 4 5 6 7 9 10 11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 20 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 20 func 2
acpi0: wakeup code va 0xca4b3000 pa 0x9e000
atpic: Programming IRQ9 as level/low
acpi: bad write to port 0x070 (8), val 0x31
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x30
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x31
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x30
acpi: bad read from port 0x071 (8)
ACPI timer: 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0xf810
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.13.INTA at func 0: 11
ACPI: Found matching pin for 0.14.INTA at func 0: 10
ACPI: Found matching pin for 0.15.INTA at func 0: 11
ACPI: Found matching pin for 0.16.INTA at func 0: 255
ACPI: Found matching pin for 0.20.INTD at func 2: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x3210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base 44000000, size 26, enabled
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 41300000, size 12, enabled
map[14]: type 4, range 32, base 00002040, size 6, enabled
map[18]: type 1, range 32, base 41200000, size 20, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.LNKA:0)
pcib0: slot 13 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x1409, dev=0x7168, revid=0x01
bus=0, slot=14, func=0
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0081, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type 4, range 32, base 00002000, size 5, enabled
pcib0: matched entry for 0.14.INTA (src \\_SB_.LNKB:0)
pcib0: slot 14 INTA routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x1000, dev=0x0001, revid=0x02
bus=0, slot=15, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 1, range 32, base 41100000, size 8, enabled
pcib0: matched entry for 0.15.INTA (src \\_SB_.LNKC:0)
pcib0: slot 15 INTA routed to irq 11 via \\_SB_.LNKC
found-> vendor=0x104c, dev=0xac1e, revid=0x00
bus=0, slot=16, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0004, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=20, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=20, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 000020e0, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=20, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type 4, range 32, base 000020c0, size 5, enabled
pcib0: matched entry for 0.20.INTD (src \\_SB_.LNKD:0)
pcib0: slot 20 INTD routed to irq 11 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=20, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 0000fc00, size 4, enabled
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x44000000-0x47ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x44000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x1000-0x1fff
pcib1: memory decode 0x40000000-0x410fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4742, revid=0x5c
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base 40000000, size 24, enabled
pcib1: (null) requested memory range 0x40000000-0x40ffffff: good
map[14]: type 4, range 32, base 00001000, size 8, enabled
pcib1: (null) requested I/O range 0x1000-0x10ff: in range
map[18]: type 1, range 32, base 41000000, size 12, enabled
pcib1: (null) requested memory range 0x41000000-0x41000fff: good
pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKC:0)
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.LNKC
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2040-0x207f mem 0x41300000-0x41300fff,0x41200000-0x412fffff irq 11 at device 13.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41300000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000e 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:90:27:88:10:e6
fxp0: [MPSAFE]
puc0: <Dolphin Peripherals 4036> port 0x2000-0x201f irq 10 at device 14.0 on pci0
puc0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x2000
uart2: <16550 or compatible> on puc0
uart3: <16550 or compatible> on puc0
sym0: <810> port 0x2400-0x24ff mem 0x41100000-0x411000ff irq 11 at device 15.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x41100000
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: [GIANT-LOCKED]
cbb0: <TI1211 PCI-CardBus Bridge> at device 16.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.16.INTA (src \\_SB_.LNKD:0)
pcib0: slot 16 INTA routed to irq 11 via \\_SB_.LNKD
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac1e104c 0x02100007 0x06070000 0x00024208
0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x00000000 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0044b060 0x00000000 0x00000000 0x00000022
0x90: 0x616600c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00c00000 0x0000000b 0x0000001f
0xb0: 0x09000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20e0-0x20ef at device 20.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x20e0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=50
ata1: stat0=0x00 err=0x10 lsb=0x00 msb=0x00
ata1: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=50 devices=0x2<ATA_SLAVE>
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x20c0-0x20df irq 11 at device 20.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20c0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 20.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:08, syncbits:00
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <floppy drive controller> port 0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sbc0: <ESS ES1869> port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on acpi0
sbc0: [GIANT-LOCKED]
pcm0: <ESS 18xx DSP> on sbc0
pcm0: ESS1869 detected, newspeed
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap ff3000, 1000; 0xd52b5000 -> ff3000
pcm0: sndbuf_setmap ff2000, 1000; 0xd52b6000 -> ff2000
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xe0000-0xe7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: fast interrupt
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: fast interrupt
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ugen0: vendor 0x05a9 product 0xa511, rev 1.00/1.00, addr 2
uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.08, addr 3
uhub1: 4 ports with 4 removable, self powered
ucom0: vendor 0x067b product 0x2303, rev 1.10/2.02, addr 4
Device configuration finished.
Timecounter "TSC" frequency 646665859 Hz quality 800
Timecounters tick every 1.000 msec
crypto: assign driver 0, flags 6
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
Fast IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging disabled
lo0: bpf attached
pccard0: CIS version PC Card Standard 5.0
pccard0: CIS info: LG, 11Mbps Wireless LAN PCI Card, Version 01.02,
pccard0: Manufacturer code 0x156, product 0x2
pccard0: function 0: network adapter, ccr addr 3e0 mask 1
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16
wi0: <LG 11Mbps Wireless LAN PCI Card> at port 0x100-0x13f irq 11 function 0 config 1 on pccard0
wi0: [MPSAFE]
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9)
wi0: bpf attached
wi0: Ethernet address: 00:04:47:50:15:3a
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad0: setting PIO4 on PIIX4 chip
ad0: setting UDMA33 on PIIX4 chip
ad0: 19595MB <MAXTOR 6L020L1 A93.0500> at ata0-master UDMA33
ad0: 40132503 sectors [42468C/15H/63S] 16 sectors/interrupt 1 depth queue
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad3: setting PIO4 on PIIX4 chip
ad3: setting UDMA33 on PIIX4 chip
ad3: 19470MB <IC35L020AVER07 0 ER2OA45A> at ata1-slave UDMA33
ad3: 39876480 sectors [42197C/15H/63S] 16 sectors/interrupt 1 depth queue
ad3: Intel check1 failed
ad3: Adaptec check1 failed
ad3: LSI (v3) check1 failed
ad3: LSI (v2) check1 failed
ad3: FreeBSD check1 failed
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(probe3:sym0:0:3:0): Retrying Command
(probe3:sym0:0:3:0): error 22
(probe3:sym0:0:3:0): Unretryable Error
pass0 at sym0 bus 0 target 3 lun 0
pass0: <TOSHIBA CD-ROM XM-5201TA 3014> Removable CD-ROM SCSI-2 device
pass0: 4.237MB/s transfers (4.237MHz, offset 8)
ATA PseudoRAID loaded
(cd0:sym0:0:3:0): Retrying Command
cd0 at sym0 bus 0 target 3 lun 0
cd0: <TOSHIBA CD-ROM XM-5201TA 3014> Removable CD-ROM SCSI-2 device
cd0: 4.237MB/s transfers (4.237MHz, offset 8)
cd0: cd present [296339 x 2048 byte records]
GEOM: new disk ad0
GEOM: new disk ad3
GEOM: new disk cd0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
--ELM82590640;-1539-0_--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200611262310.kAQNADBB016434>