Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 8 Nov 2001 15:10:59 -0600
From:      "Nicpon, John" <John.Nicpon@SouthTrust.com>
To:        "Mike Meyer" <mwm@mired.org>
Cc:        "Jonathan Lemon" <jlemon@flugsvamp.com>, "Kent Stewart" <kstewart@owt.com>, <freebsd-hackers@freebsd.org>
Subject:   RE: SIS 900 Onboard NIC /w SIS 735 Chipset Motherboard.
Message-ID:  <2AACFCDB6086274CA42D44085EF1BAA2294069@msm-001.msg.stcorp.com>

next in thread | raw e-mail | index | archive | help
It was a small link on the bottom of this page for users who did a bad
bios flash.
I thought there might be some information as far as card parameters that
would assist in updating the drivers.

http://www.ecsusa.com/ecsusa/www.ecs.com.tw/download/k7s5a.htm

-----Original Message-----
From: Mike Meyer [mailto:mwm@mired.org]
Sent: Thursday, November 08, 2001 3:02 PM
To: Nicpon, John
Cc: Jonathan Lemon; Kent Stewart; freebsd-hackers@freebsd.org
Subject: RE: SIS 900 Onboard NIC /w SIS 735 Chipset Motherboard.


[Context recovered from top posting.]

Nicpon, John <John.Nicpon@SouthTrust.com> types:
> > From: Mike Meyer [mailto:mwm@mired.org]
> > Nicpon, John <John.Nicpon@SouthTrust.com> types:
> > > I've been having the same problem listed below and was wondering
if
> > > anyone had a fix?
> > There wasn't a fix when I asked last week, and I've not been able to
> > get technical specs out of SiS. If you get one, I'd appreciate
hearing
> > about it.
> I have attached a file from the ecsusa.com for reprogramming the MAC
> address. Perhaps the data file included could provide the necessary
> information for updating the SIS900 driver. Please advise.

Could you provide a pointer to where you found it? An explanation of
why users need to reprogram their MAC's - which is rather unusual -
would help quite a bit.

	<mike
--
Mike Meyer <mwm@mired.org>
http://www.mired.org/home/mwm/
Q: How do you make the gods laugh?		A: Tell them your plans.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2AACFCDB6086274CA42D44085EF1BAA2294069>