Date: Thu, 27 Mar 2008 13:32:46 +0200 From: Danny Braniss <danny@cs.huji.ac.il> To: pyunyh@gmail.com Cc: freebsd-stable@freebsd.org Subject: Re: Marvell Technology Group Ltd. Yukon EC Ultra Message-ID: <E1JeqLf-000EDk-0z@cs1.cs.huji.ac.il> In-Reply-To: Your message of Thu, 27 Mar 2008 20:24:25 %2B0900 .
next in thread | raw e-mail | index | archive | help
> On Thu, Mar 27, 2008 at 12:57:31PM +0200, Danny Braniss wrote: > > Hi, > > Under load, the msk has problems, with hw.msk.legacy_intr=1 and 0. > > with = 1, i get > > TCP segementation error > > watchdog timeout > > with = 0, > > Tx MAC parity error > > watchdog timeout > > > > Would you show me verbosed boot messages related with msk(4)/e1000phy(4)? > mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfeafc000-0xfeafffff irq 17 at device 0.0 on pci1 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfeafc000 mskc0: MSI count : 1 mskc0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 52 mskc0: using IRQ 256 for MSI mskc0: RAM buffer size : 128KB mskc0: Port 0 : Rx Queue 85KB(0x00000000:0x000153ff) mskc0: Port 0 : Tx Queue 43KB(0x00015400:0x0001ffff) msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 msk0: bpf attached msk0: Ethernet address: 00:1e:8c:6d:5c:fe miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [MPSAFE] mskc0: [FILTER] is this enough? danny > > the board is a Asus P5K-VM > > > > Cheers, > > danny > > > > > > -- > Regards, > Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1JeqLf-000EDk-0z>