Date: Wed, 4 Jul 2001 21:54:09 +0300 From: Tomi Vainio - Sun Finland - <Tomi.Vainio@Sun.COM> To: freebsd-current@freebsd.org Subject: Nokia C110 WLAN Message-ID: <15171.26193.676993.450713@gargle.gargle.HOWL>
next in thread | raw e-mail | index | archive | help
Hi,
This card should be a prism2 clone and it works with Linux prism2
driver. I have tried to get this work with current but no luck yet.
Jul 4 21:48:35 phb pccardd[174]: Card "Nokia"("C110/C111 Wireless LAN
Card") [(null)] [(null)] matched "Nokia" ("C110/C111 Wireless LAN Card") [(null)] [(null)]
Jul 4 21:48:40 phb /boot/kernel/kernel: wi0: No I/O space?!
Jul 4 21:48:40 phb pccardd[174]: driver allocation failed for Nokia(C110/C111 Wireless LAN Card): Device not configured
card "Nokia" "C110/C111 Wireless LAN Card"
config 0x1 "wi" ? 0x10000
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
I already tried auto and without 0x10000
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
000: 02 00 00 ff
(3V card)
Tuple #3, code = 0x15 (Version 1 info), length = 37
000: 07 00 4e 6f 6b 69 61 00 43 31 31 30 2f 43 31 31
010: 31 20 57 69 72 65 6c 65 73 73 20 4c 41 4e 20 43
020: 61 72 64 00 ff
Version = 7.0, Manuf = [Nokia], card vers = [C110/C111
Wireless LAN Card]
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
000: 24 01 10 11
PCMCIA ID = 0x124, OEM ID = 0x1110
Tuple #5, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #6, code = 0x22 (Functional EXT), length = 2
000: 01 07
Network technology: Wireless
Tuple #7, code = 0x22 (Functional EXT), length = 5
000: 02 c0 d8 a7 00
Network speed: 11 Mb/sec
Tuple #8, code = 0x22 (Functional EXT), length = 2
000: 03 07
Network media: 2.4 GHz
Tuple #9, code = 0x1a (Configuration map), length = 4
000: 00 02 f4 01
Reg len = 1, config register addr = 0xf4, last config = 0x2
Registers: X-------
Tuple #10, code = 0x1b (Configuration entry), length = 19
000: c1 01 1d 79 55 a6 1e a6 1e b6 14 24 e5 13 5f 64
010: 30 ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 2 x 100mA, ext = 0x1e
Max current average over 1 second: 2 x 100mA, ext =
0x1e
Max current average over 10 ms: 3 x 100mA, ext = 0x14
Power down supply current: 2 x 1mA
Wait scale Speed = 1.2 x 1 us, scaled by 10
RDY/BSY scale Speed = 5.0 x 10 ms, scaled by 10
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #11, code = 0x1b (Configuration entry), length = 10
000: 02 01 79 b5 1e 36 36 b6 46 24
Config index = 0x2
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Continuous supply current: 3 x 100mA
Max current average over 1 second: 3 x 100mA
Max current average over 10 ms: 3 x 100mA, ext = 0x46
Power down supply current: 2 x 1mA
Tuple #12, code = 0x14 (No link), length = 0
Tuple #13, code = 0xff (Terminator), length = 0
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: Tomi.Vainio@Sun.COM +358 9 52556252 fax
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15171.26193.676993.450713>