Date: Tue, 10 Feb 1998 07:25:19 -0800 From: Ron Rosson <insane@oneinsane.net> To: "Neil T. Mathison" <mathison@sara.cpb.org> Cc: freebsd-hardware@FreeBSD.ORG Subject: Re: DEC TLZ06 4mm DAT Message-ID: <3.0.5.32.19980210072519.03521140@the.oneinsane.net> In-Reply-To: <Pine.OSF.3.96.980209100739.20696A-100000@sara.cpb.org> References: <3.0.5.32.19980208092308.035c83a0@the.oneinsane.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Just a thank you for all the replies on got on this request. It was alot more than I could find digging through search engines and the web. You guys are the greatest. This info hopefully will help me solve my issue I have with the drive. Ron At 10:35 AM 2/9/98 -0500, Neil T. Mathison wrote: > >On Sun, 8 Feb 1998, Ron Rosson wrote: > >> I am looking for a tech sheet, jumper configuration sheet >> and anything that is useful for me to troubleshoot this drive. >> At the moment it makes tapes but when I do a tar tvf It fails. >> I have been told it is power connectors but at this point in >> time I dont have time to break this box down. So when I do get >> the time to work on it, I would enjoy in any tech, configuration, >> etc sheets on this drive. >> >> TIA >> Ron >> P.S. Running FreeBSD-2.2.5-STABLE >> > > > No compression Compression >TLZ06-CA (90 m) 2.0 GB 4.0 GB > >90 meter tapes are the maximum. > >Dip switch setting > > 1 SCSI ID 1 > 2 SCSI ID 2 > 3 SCSI ID 3 > 4 SCSI-1 or SCSI-2 (on is SCSI-2) > 5 Parity Enable (in is enabled) > 6 Compression Enable/Disbale (on is disabled) > 7 off (reserved for future use) > 8 self-test (on is enabled) > >The parameters that should be used when running dump > > noncompressed > density = 61000 effective tape length (with 90 meter tape) = 57440 > dump 0ds 61000 57440 ... > compressed > density = 61000 effective tape length (with 90 meter tape) = > 57740 x 2 > dump 0ds 61000 114880 ... > > > -------------------------------------------------------- Ron Rosson ... and a UNIX user said ... rlr@n2.net rm -rf * insane@oneinsane.net and all was null and void -------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.19980210072519.03521140>