Date: Thu, 14 Nov 2002 23:11:48 -0500 From: "Dan Langille" <dan@langille.org> To: freebsd-stable@freebsd.org Cc: sos@FreeBSD.org Subject: Re: 4.7 kernel does not find aha1 Message-ID: <3DD42DB4.28201.9CD01B5F@localhost> In-Reply-To: <20021114163407.Y5562-100000@m20.unixathome.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--Message-Boundary-24837 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Content-description: Mail message body Attached are: results of a boot -v for the 4.7 kernel results of a boot -v for the 4.6 kernel pciconf -l for the 4.6 kernel Anything I can provide which might be useful? Thanks -- Dan Langille : http://www.langille.org/ --Message-Boundary-24837 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Content-description: Text from file '4.7-boot-v.txt' ok boot -v SMAP type=01 base=00000000 00000000 len=00000000 0009fc00 SMAP type=01 base=00000000 0009fc00 len=00000000 00000400 SMAP type=02 base=00000000 000f0000 len=00000000 00010000 SMAP type=02 base=00000000 ffff0000 len=00000000 00010000 SMAP type=01 base=00000000 00100000 len=00000000 03f00000 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #0: Fri Nov 15 09:44:58 NZDT 2002 dan@cvsup.nz.freebsd.org:/usr/home/ncvs/usr-src/sys/compile/ZEKE Calibrating clock(s) ... TSC clock: 132974131 Hz, i8254 clock: 1193359 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P54C (132.95-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 67108864 (65536K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x00506000 - 0x03ff7fff, 61808640 bytes (15090 pages) kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 avail memory = 60383232 (58968K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fae70 bios32: Entry = 0xfb270 (c00fb270) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb2a0 pnpbios: Found PnP BIOS data at 0xc00fbf90 pnpbios: Entry = f0000:bfb8 Rev = 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc04df000. Intel Pentium detected, installing workaround for F00F bug Creating DISK md0 md0: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086) npx0: <math processor> on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 130225289 bytes/sec bzero() bandwidth = 736919675 bytes/sec pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x1250, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7000, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7010, revid=0x00 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x8086, dev=0x1229, revid=0x01 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=15 map[10]: type 1, range 32, base e1100000, size 12 map[14]: type 1, range 32, base 00006100, size 5 map[18]: type 1, range 32, base e1000000, size 20 found-> vendor=0x1013, dev=0x00a8, revid=0xf9 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 24 pci0: <PCI bus> on pcib0 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks Extended BIOS: disabled Lower BIOS: disabled Coprocessor IRQ13: enabled Mouse IRQ12: disabled Interrupt Routing: A: disabled, B: IRQ15, C: disabled, D: disabled MB0: disabled, MB1: isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: at 0x170 irq 15 on atapci0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6100-0x611f mem 0xe1000000-0xe10f ffff,0xe1100000-0xe1100fff irq 15 at device 18.0 on pci0 fxp0: using memory space register mapping using shared irq15. fxp0: Ethernet address 00:a0:c9:16:d5:60, 10Mbps fxp0: PCI IDs: 8086 1229 0000 0000 0001 fxp0: Dynamic Standby mode is disabled bpf: fxp0 attached pci0: <Cirrus Logic GD5434 SVGA controller> (vendor=0x1013, dev=0x00a8) at 19.0 ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 ADP1542: adding irq mask 0xdc00 ADP1542: adding dma mask 0xe0 ADP1542: start dependant ADP1542: adding io range 0x330-0x333, size=0x4, align=0x4 ADP1542: start dependant ADP1542: adding io range 0x334-0x337, size=0x4, align=0x4 ADP1542: start dependant ADP1542: adding io range 0x234-0x237, size=0x4, align=0x4 ADP1542: start dependant ADP1542: adding io range 0x230-0x233, size=0x4, align=0x4 ADP1542: start dependant ADP1542: adding io range 0x134-0x137, size=0x4, align=0x4 ADP1542: start dependant ADP1542: adding io range 0x130-0x133, size=0x4, align=0x4 ADP1542: end dependant ADP1542: adding memory range 0xc8000-0xdffff, size=0x4000, align=0x4000 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, terminal emulator: sc (syscons terminal) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0 sio0: type 16550A, console sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 isa_probe_children: probing PnP devices aha1: status reg test failed ff unknown: <Adaptec 1542/aha-1535> failed to probe at port 0x330-0x33f iomem 0xcc0 00-0xcffff irq 10 drq 5 on isa0 BIOS Geometries: 0:026a3f3f 0..618=619 cylinders, 0..63=64 heads, 1..63=63 sectors 1:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors 2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c040, tty 630098, net 678098 bpf: sl0 attached bpf: faith0 attached IPsec: Initialized Security Association Processing. ad0: success setting WDMA2 on Intel chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <Seagate Technology 1275MB - ST31276A/1.35> ATA-2 disk at ata0-master ad0: 1221MB (2501856 sectors), 2482 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, WDMA2 ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0 Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 2499839, size 2499777 : OK start_init: trying /sbin/init swapon: adding /dev/ad0s1b as swap device Automatic boot in progress... /dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1a: clean, 6417 free (113 frags, 788 blocks, 0.2% fragmentation) Can't open /dev/da1s1e: Device not configured /dev/da1s1e: CAN'T CHECK FILE SYSTEM. /dev/da1s1e: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. /dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1f: clean, 647395 free (40411 frags, 75873 blocks, 3.6% fragmentation) /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1e: clean, 17010 free (266 frags, 2093 blocks, 1.3% fragmentation) THE FOLLOWING FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY: /dev/da1s1e (/home/ncvs) Automatic file system check failed . . . help! Enter full pathname of shell or RETURN for /bin/sh: --Message-Boundary-24837 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Content-description: Text from file '4.6-boot-v.txt' ok unload ok load kernel.old.works /kernel.old.works text=0x2e3775 data=0x3b4a0+0x345f4 syms=[0x4+0x3e450+0x4+0x44e 15] ok boot -v SMAP type=01 base=00000000 00000000 len=00000000 0009fc00 SMAP type=01 base=00000000 0009fc00 len=00000000 00000400 SMAP type=02 base=00000000 000f0000 len=00000000 00010000 SMAP type=02 base=00000000 ffff0000 len=00000000 00010000 SMAP type=01 base=00000000 00100000 len=00000000 03f00000 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-STABLE #0: Tue Aug 13 13:31:45 NZST 2002 dan@cvsup.nz.freebsd.org:/usr/home/ncvs/usr-obj/usr/src/sys/ZEKE Calibrating clock(s) ... TSC clock: 132973991 Hz, i8254 clock: 1193358 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P54C (132.96-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 67108864 (65536K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x00500000 - 0x03ff7fff, 61833216 bytes (15096 pages) kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 avail memory = 60407808 (58992K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fae70 bios32: Entry = 0xfb270 (c00fb270) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb2a0 pnpbios: Found PnP BIOS data at 0xc00fbf90 pnpbios: Entry = f0000:bfb8 Rev = 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel.old.works" at 0xc04d9000. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086) npx0: <math processor> on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 130225289 bytes/sec bzero() bandwidth = 736377025 bytes/sec pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x1250, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7000, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7010, revid=0x00 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x8086, dev=0x1229, revid=0x01 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=15 map[10]: type 1, range 32, base e1100000, size 12 map[14]: type 1, range 32, base 00006100, size 5 map[18]: type 1, range 32, base e1000000, size 20 found-> vendor=0x1013, dev=0x00a8, revid=0xf9 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 24 pci0: <PCI bus> on pcib0 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks Extended BIOS: disabled Lower BIOS: disabled Coprocessor IRQ13: enabled Mouse IRQ12: disabled Interrupt Routing: A: disabled, B: IRQ15, C: disabled, D: disabled MB0: disabled, MB1: isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: at 0x170 irq 15 on atapci0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6100-0x611f mem 0xe1000000-0xe10f ffff,0xe1100000-0xe1100fff irq 15 at device 18.0 on pci0 fxp0: using memory space register mapping using shared irq15. fxp0: Ethernet address 00:a0:c9:16:d5:60, 10Mbps fxp0: PCI IDs: 8086 1229 0000 0000 0001 fxp0: Dynamic Standby mode is disabled bpf: fxp0 attached pci0: <Cirrus Logic GD5434 SVGA controller> (vendor=0x1013, dev=0x00a8) at 19.0 ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 ADP1542: adding irq mask 0xdc00 ADP1542: adding dma mask 0xe0 ADP1542: start dependant ADP1542: adding io range 0x330-0x333, size=0x4, align=0x4 ADP1542: start dependant ADP1542: adding io range 0x334-0x337, size=0x4, align=0x4 ADP1542: start dependant ADP1542: adding io range 0x234-0x237, size=0x4, align=0x4 ADP1542: start dependant ADP1542: adding io range 0x230-0x233, size=0x4, align=0x4 ADP1542: start dependant ADP1542: adding io range 0x134-0x137, size=0x4, align=0x4 ADP1542: start dependant ADP1542: adding io range 0x130-0x133, size=0x4, align=0x4 ADP1542: end dependant ADP1542: adding memory range 0xc8000-0xdffff, size=0x4000, align=0x4000 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, terminal emulator: sc (syscons terminal) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0 sio0: type 16550A, console sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 isa_probe_children: probing PnP devices aha1: <Adaptec 1542/aha-1535> at port 0x330-0x333 iomem 0xcc000-0xcffff irq 10 d rq 5 on isa0 aha1: AHA-1542CP FW Rev. F.0 (ID=46) SCSI Host Adapter, SCSI ID 7, 16 CCBs BIOS Geometries: 0:026a3f3f 0..618=619 cylinders, 0..63=64 heads, 1..63=63 sectors 1:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors 2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: faith0 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c040, tty 630098, net 678098 bpf: sl0 attached IPsec: Initialized Security Association Processing. ad0: success setting WDMA2 on Intel chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <Seagate Technology 1275MB - ST31276A/1.35> ATA-2 disk at ata0-master ad0: 1221MB (2501856 sectors), 2482 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, WDMA2 ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0 Waiting 15 seconds for SCSI devices to settle Creating DISK da0 Creating DISK da1 pass0 at aha1 bus 0 target 0 lun 0 pass0: <SEAGATE ST32550N 0019> Fixed Direct Access SCSI-2 device pass0: Serial Number 01414934 pass0: 10.000MB/s transfers (10.000MHz, offset 8) pass1 at aha1 bus 0 target 3 lun 0 pass1: <COMPAQ ST19171W 9A10> Fixed Direct Access SCSI-2 device pass1: Serial Number LAA89359 pass1: 10.000MB/s transfers (10.000MHz, offset 8) da0 at aha1 bus 0 target 0 lun 0 da0: <SEAGATE ST32550N 0019> Fixed Direct Access SCSI-2 device da0: Serial Number 01414934 da0: 10.000MB/s transfers (10.000MHz, offset 8) da0: 2047MB (4194058 512 byte sectors: 64H 32S/T 2047C) da1 at aha1 bus 0 target 3 lun 0 da1: <COMPAQ ST19171W 9A10> Fixed Direct Access SCSI-2 device da1: Serial Number LAA89359 da1: 10.000MB/s transfers (10.000MHz, offset 8) da1: 8678MB (17773500 512 byte sectors: 64H 32S/T 8678C) Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 2499839, size 2499777 : OK start_init: trying /sbin/init swapon: adding /dev/ad0s1b as swap device Automatic boot in progress... /dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1a: clean, 6417 freed (113 frags, 788a blocks, 0.2% fr1agmentation) s1: type 0xa5, start 63, end = 17767889, size 17767827 : OK /dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1f: clean, 647398 free (40414 frags, 75873 blocks, 3.6% fragmentation) /dev/da1s1e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da1s1e: clean, 5907968 free (25344 frags, 735328 blocks, 0.3% fragmentation ) /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1e: clean, 17038 free (262 frags, 2097 blocks, 1.3% fragmentation) da1s1: type 0xa5, start 63, end = 17767889, size 17767827 : OK Doing initial network setup: hostnameIP Filter: v3.4.29 initialized. Default = pass all, Logging = enabled IP-filter module loaded. ipfilter. fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 210.48.103.157 netmask 0xfffffff0 broadcast 210.48.103.159 inet6 fe80::2a0:c9ff:fe16:d560%fxp0 prefixlen 64 tentative scopeid 0x1 ether 00:a0:c9:16:d5:60 media: Ethernet manual lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff000000 add net default: gateway 210.48.103.145 Additional routing options: TCP keepalive=YES. Routing daemons:. Additional daemons: syslogd. Doing additional network setup: ntpd. Starting final network daemons:. ELF ldconfig path: /usr/lib /usr/lib/compat /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout Starting standard daemons: inetd cron sshd sendmail-submit sendmail-clientmqueue . Initial rc.i386 initialization:. Configuring syscons: blanktime screensaver. Additional ABI support:. Local package initialization: cvsupd. Additional TCP options:. Fri Nov 15 17:00:45 NZDT 2002 FreeBSD/i386 (cvsup.nz.freebsd.org) (ttyd0) login: --Message-Boundary-24837 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Content-description: Text from file '4.6-pciconf.txt' [dan@cvsup:/usr/home/dan] $ sudo pciconf -l chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x12508086 rev=0x03 hdr=0x00 isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x70008086 rev=0x01 hdr=0x00 atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x70108086 rev=0x00 hdr=0x00 fxp0@pci0:18:0: class=0x020000 card=0x00000000 chip=0x12298086 rev=0x01 hdr=0x00 none0@pci0:19:0: class=0x030000 card=0x00000000 chip=0x00a81013 rev=0xf9 hdr=0x00 --Message-Boundary-24837-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DD42DB4.28201.9CD01B5F>