Date: Wed, 12 Dec 2012 16:44:44 -0800 From: "Adrian Chadd" <adrian.chadd@gmail.com> To: "Andrey Fesenko" <f0andrey@gmail.com>, "Adrian Chadd" <adrian@freebsd.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org>, freebsd-current <freebsd-current@freebsd.org> Subject: Re: AR9285 not see n-channels Message-ID: <50c92508.6384440a.1379.3a4a@mx.google.com> In-Reply-To: <CA%2BK5SrNXYStOoXbp5N4Gnd4_omkr0HghCYGhNvFHSk7EDcDYRA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Yup. It's doing 11n rates.
Compile and run athstats, it'll tell you how many aggregate frames are bein=
g sent and received.
Adrian
Sent from my Palm Pre on AT&T
On Dec 12, 2012 4:39 PM, Andrey Fesenko <f0andrey@gmail.com> wrote:=20
On Thu, Dec 13, 2012 at 4:32 AM, Adrian Chadd <adrian@freebsd.org> wr=
ote:
> What's 'ifconfig wlan0' and 'ifconfig wlan0 list sta' look like?
>
>
>
> adrian
>
>
> On 12 December 2012 15:51, Andrey Fesenko <f0andrey@gmail.com>=
wrote:
>> I have
>> # uname -a
>> FreeBSD beastie.mydomain.local 10.0-CURRENT FreeBSD 10.0-CURRENT=
#1
>> r243259: Mon Nov 19 09:28:08 MSK 2012
>> root@beastie.mydomain.local:/usr/obj/usr/src/sys/W_BOOK amd64
>> # grep ATH /usr/src/sys/amd64/conf/W_BOOK
>> options ATH_ENABLE_11N
>> options ATH_DEBUG
>> options ATH_DIAGAPI
>>
>> pciconf
>> ath0@pci0:5:0:0: class=3D0x028000 card=3D0xe016105b chip=3D=
0x002b168c
>> rev=3D0x01 hdr=3D0x00
>> vendor =3D 'Atheros Communications Inc.'
>> device =3D 'AR9285 Wireless Network Adapter (PCI-Express)'
>> class =3D network
>>
>>
>> # ifconfig -v wlan0 list channel
>> Channel 1 : 2412 MHz 11b Channel 7 : 2442 =
MHz 11g ht/20
>> Channel 1 : 2412 MHz 11g Channel 8 : 2447 =
MHz 11b
>> Channel 1 : 2412 MHz 11g ht/20 Channel 8 : 2447 =
MHz 11g
>> Channel 2 : 2417 MHz 11b Channel 8 : 2447 =
MHz 11g ht/20
>> Channel 2 : 2417 MHz 11g Channel 9 : 2452 =
MHz 11b
>> ....
>>
>> wi-fi router have and enable n-mode (linksys e4200)
>> How to turn on or activate n-mode?
# ifconfig wlan0 list sta
ADDR AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS FLAG
58:6d:8f:fa:d9:50 5 12 72M 27.5 0 2079 31872 EP AQEHTRS
RSN HTCAP WME WPS
# ifconfig wlan0
wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0=
mtu 1500
ether 4c:0f:6e:4b:4e:f5
inet 192.168.1.41 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
status: associated
ssid hometest channel 12 (2467 MHz 11g ht/20) bssid 58:6d:8f:fa:d9:=
50
regdomain 101 indoor ecm authmode WPA2/802.11i privacy ON
deftxkey UNDEF AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 20 bmiss=
7
scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 4 shortgi wme
burst roaming MANUAL
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50c92508.6384440a.1379.3a4a>