Date: Thu, 15 Jan 2004 17:21:49 -0800 From: Max Clark <max@clarksys.com> To: freebsd-stable@freebsd.org Cc: freebsd-questions@freebsd.org Subject: Re: 4.9-Stable: Disk error booting from hard drive Message-ID: <bu7eco$bjb$1@sea.gmane.org> In-Reply-To: <bu7c15$7fo$1@sea.gmane.org> References: <bu7c15$7fo$1@sea.gmane.org>
next in thread | previous in thread | raw e-mail | index | archive | help
To make this even weirder, I just installed 4.8 and it works. So now 4.8 works, 5.2 works and 4.9 doesn't. What is up with 4.9? Thanks, Max Max Clark wrote: > Hi all, > > I am completely stumped by this one. I have a new MSI 1u P1-1000 server: > 2.4GHz P4, 1GB Ram, with a 40GB IDE (38166MB <ST340014A> [77545/16/63]) > hard drive on the primary master channel. > > Here's the problem, I can install 4.9-Stable, but when I finish and > reboot the machine the bios reports disk error, the machine reboots and > is trapped in this loop (I've tried setting the box up with a Boot > Manger and Standard, but it doesn't work for either). > > To make things interesting 5.2-Release works fine, I can install, > reboot, everything is cool. I don't understand what is going on here, I > even tried re-downloading the 4.9 iso to check my cd with no luck. > > This machine will be a high use server so I really want to run Stable, > what do I need to do? > > Thanks in advance, > Max > > This is the dmesg from 5.2: > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004 > root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a331f4. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2391.15-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > real memory = 1073676288 (1023 MB) > avail memory = 1033510912 (985 MB) > ACPI APIC Table: <IntelR AWRDACPI> > ioapic0 <Version 2.0> irqs 0-23 on motherboard > Pentium Pro MTRR support enabled > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <IntelR AWRDACPI> on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 10 entries at 0xc00fdec0 > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_cpu1: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu1 attach returned 6 > acpi_tz0: <Thermal Zone> on acpi0 > acpi_button0: <Power Button> on acpi0 > acpi_button1: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82845 host to AGP bridge> mem 0xd0000000-0xdfffffff at > device 0.0 on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f > irq 16 at device 29.0 on pci0 > usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f > irq 19 at device 29.1 on pci0 > usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd400-0xd41f > irq 18 at device 29.2 on pci0 > usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pci0: <serial bus, USB> at device 29.7 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port > 0xc000-0xc03f mem 0xe2000000-0xe201ffff irq 21 at device 5.0 on pci2 > em0: Speed:N/A Duplex:N/A > fxp0: <Intel 82551 Pro/100 Ethernet> port 0xc400-0xc43f mem > 0xe2020000-0xe203ffff,0xe2041000-0xe2041fff irq 23 at device 6.0 on pci2 > fxp0: Ethernet address 00:0c:76:4e:78:73 > miibus0: <MII bus> on fxp0 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci2: <display, VGA> at device 7.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH4 UDMA100 controller> port > 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > acpi_cpu1: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu1 attach returned 6 > orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2391145900 Hz quality 800 > Timecounters tick every 10.000 msec > GEOM: create disk ad0 dp=0xc6b80d60 > ad0: 38166MB <ST340014A> [77545/16/63] at ata0-master UDMA100 > acd0: CDROM <SR244W> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > em0: Link is up 100 Mbps Full Duplex > em0: Link is up 100 Mbps Full Duplex > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bu7eco$bjb$1>