Date: Mon, 25 Aug 2003 15:02:38 -0700 (PDT) From: Nate Lawson <nate@root.org> To: Lars Eggert <larse@ISI.EDU> Cc: current@freebsd.org Subject: Re: panic with CF drive + USB reader Message-ID: <20030825150135.C18645@root.org> In-Reply-To: <3F4A8446.30504@isi.edu> References: <20030825141234.Q18452@root.org> <3F4A8446.30504@isi.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 25 Aug 2003, Lars Eggert wrote: > Nate Lawson wrote: > >>this happens with an IBM MicroDrive mounted on a USB CF reader, -current > > > >>from 8/19/03. I couldn't get a coredump: > > > >>umass0: BBB reset failed, STALLED > >>(da2:umass-sim0:0:0:0): AutoSense Failed > >>umass0: BBB reset failed, STALLED > >>(da2:umass-sim0:0:0:0): AutoSense Failed > >>panic: softdep_setup_freeblocks: inode busy > >>da2 at umass-sim0 bus 0 target 0 lun 0 > >>da2: <SanDisk ImageMate II 1.30> Removable Direct Access SCSI-2 device > >>da2: 1.000MB/s transfers > >>da2: 1027MB (2104705 512 byte sectors: 255H 63S/T 131C) > > > > Your microdrive may need some USB quirks. Try RS_NO_CLEAR_UA (see > > /sys/dev/usb/umass.c for examples). > > Thanks, I'll try that. It also complains during boot about not > supporting Get Max Lun, so that's a quirk also. No, that's likely not a quirk. Complaining is ok if it doesn't cause actual problems (i.e. can't mount partition). Try one quirk at a time until it works. > Do you have any guesses what combination to use for the wire and command > protocol fields for this device? Copy a BBB line most likely. -Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030825150135.C18645>