Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 21 Jul 2009 11:31:28 +0000
From:      "O. Hartmann" <ohartman@zedat.fu-berlin.de>
To:        freebsd-current@FreeBSD.org
Subject:   FreeBSD 8.0-BETA2/amd64 and DELL Poweredge 1930: USB oddities
Message-ID:  <4A65A710.5050508@zedat.fu-berlin.de>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------080706080008040609070704
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit

Running FreeBSD 8.0-BETA2/amd64 now a while on a server we use for 
scientific purposes. I realize problems since a couple of weeks now 
rendering the box instable. Attaching the USB keyboard to any of the 
front USB ports seems to induce some issues - only one port is capable 
of delivering keyboard functionality, the alternative one does not offer 
a keyboard after reboot. Interestingly, a similar issue is recognized on 
another FreeBSD 8.0-BETA2/amd64 box. The system is crashing immediately 
after bootup when moving the USB mouse when the mouse is NOT attached to 
as specific set of two USB ports (USB is only used for mouse, nothing 
else, keyboard is PS/2)!

Referrring to the problems recognized on the DELL box, I can only 
provide a most recent dmesg-output after a crash and reattaching the 
keyboard to another USB port.

Any suggestions out there?

Thanks in advance,
Oliver

--------------080706080008040609070704
Content-Type: text/plain;
 name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.txt"

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA2 #33 r195797: Tue Jul 21 08:39:16 CEST 2009
    root@thusnelda.geoinf.fu-berlin.de:/usr/obj/usr/src/sys/THUSNELDA
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff809dd000.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff809dd1c0.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2496538027 Hz
CPU: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz (2496.54-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 17179869184 (16384 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000a18000 - 0x00000000bfb4ffff, 3205726208 bytes (782648 pages)
0x00000000bfb64000 - 0x00000000bfb65fff, 8192 bytes (2 pages)
0x0000000100000000 - 0x00000004200affff, 13422493696 bytes (3276976 pages)
avail memory = 16547356672 (15780 MB)
ACPI APIC Table: <DELL   PE_SC3  >
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 5
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 7
APIC: CPU 4 has ACPI ID 2
APIC: CPU 5 has ACPI ID 6
APIC: CPU 6 has ACPI ID 4
APIC: CPU 7 has ACPI ID 8
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0xf21b0 00024 (v2 DELL  )
ACPI: XSDT 0xf224c 00084 (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: FACP 0xbfb83524 000F4 (v3 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: DSDT 0xbfb66000 04974 (v1 DELL   PE_SC3   00000001 INTL 20050624)
ACPI: FACS 0xbfb85c00 00040
ACPI: APIC 0xbfb83078 00092 (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: SPCR 0xbfb83130 00050 (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: HPET 0xbfb83184 00038 (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: MCFG 0xbfb831c0 0003C (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: WD__ 0xbfb83200 00134 (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: SLIC 0xbfb83338 00024 (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: ERST 0xbfb6aaf4 00210 (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: HEST 0xbfb6ad04 0027C (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: BERT 0xbfb6a974 00030 (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: EINJ 0xbfb6a9a4 00150 (v1 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: TCPA 0xbfb834bc 00064 (v1 DELL   PE_SC3   00000001 DELL 00000001)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 8
ioapic0: Routing external 8259A's -> intpin 0
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
kbd: new array size 4
kbd1 at kbdmux0
nfslock: pseudo-device
mem: <memory>
crypto: <crypto core>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
acpi0: <DELL PE_SC3> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff8000032000 pa 0x4000
AcpiOsDerivePciId: \\_SB_.PCI0.MCHM.MCH0 -> bus 0 dev 16 func 1
AcpiOsDerivePciId: \\_SB_.PCI0.MCHD.MCH0 -> bus 0 dev 16 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISA_.LPCC -> bus 0 dev 31 func 0
ipmi0: KCS mode found at io 0xca8 on acpi
ipmi0: KCS error: ff
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12
  Validation          0    5   N     0  3 4 5 6 7 10 11 12
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12
  Validation          0   10   N     0  3 4 5 6 7 10 11 12
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12
  Validation          0  255   N     0  3 4 5 6 7 10 11 12
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    6   N     0  3 4 5 6 7 10 11 12
  Validation          0    6   N     0  3 4 5 6 7 10 11 12
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    6   N     0  3 4 5 6 7 10 11 12
  Validation          0    6   N     0  3 4 5 6 7 10 11 12
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12
  Validation          0   10   N     0  3 4 5 6 7 10 11 12
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12
  Validation          0  255   N     0  3 4 5 6 7 10 11 12
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12
  Validation          0   11   N     0  3 4 5 6 7 10 11 12
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x25c0, revid=0x12
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e2, revid=0x12
	domain=0, bus=0, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e3, revid=0x12
	domain=0, bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25f8, revid=0x12
	domain=0, bus=0, slot=4, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e5, revid=0x12
	domain=0, bus=0, slot=5, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25f9, revid=0x12
	domain=0, bus=0, slot=6, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e7, revid=0x12
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x1a38, revid=0x12
	domain=0, bus=0, slot=8, func=0
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xfc600c00, size 10, enabled
pcib0: matched entry for 0.8.INTA
pcib0: slot 8 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x25f0, revid=0x12
	domain=0, bus=0, slot=16, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f0, revid=0x12
	domain=0, bus=0, slot=16, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f0, revid=0x12
	domain=0, bus=0, slot=16, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f1, revid=0x12
	domain=0, bus=0, slot=17, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f3, revid=0x12
	domain=0, bus=0, slot=19, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f5, revid=0x12
	domain=0, bus=0, slot=21, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f6, revid=0x12
	domain=0, bus=0, slot=22, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2690, revid=0x09
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2688, revid=0x09
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xcce0, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found->	vendor=0x8086, dev=0x2689, revid=0x09
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=6
	map[20]: type I/O Port, range 32, base 0xccc0, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 20
found->	vendor=0x8086, dev=0x268a, revid=0x09
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[20]: type I/O Port, range 32, base 0xcca0, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 21
found->	vendor=0x8086, dev=0x268b, revid=0x09
	domain=0, bus=0, slot=29, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=6
	map[20]: type I/O Port, range 32, base 0xcc80, size  5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 20
found->	vendor=0x8086, dev=0x268c, revid=0x09
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfc600800, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found->	vendor=0x8086, dev=0x244e, revid=0xd9
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2670, revid=0x09
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x269e, revid=0x09
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type I/O Port, range 32, base 0xfc00, size  4, enabled
found->	vendor=0x8086, dev=0x2680, revid=0x09
	domain=0, bus=0, slot=31, func=2
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xcc78, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xcc70, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xcc60, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xcc58, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xcc40, size  4, enabled
	map[24]: type Memory, range 32, base 0xfc600400, size 10, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 23
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     4
pcib1:   subordinate bus   9
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xf2000000-0xf7ffffff
pcib1:   no prefetched decode
pci4: <ACPI PCI bus> on pcib1
pci4: domain=0, physical bus=4
found->	vendor=0x8086, dev=0x3500, revid=0x01
	domain=0, bus=4, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x350c, revid=0x01
	domain=0, bus=4, slot=0, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pcib2:   domain            0
pcib2:   secondary bus     5
pcib2:   subordinate bus   8
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xf4000000-0xf7ffffff
pcib2:   no prefetched decode
pci5: <ACPI PCI bus> on pcib2
pci5: domain=0, physical bus=5
found->	vendor=0x8086, dev=0x3510, revid=0x01
	domain=0, bus=5, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x3514, revid=0x01
	domain=0, bus=5, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pcib3:   domain            0
pcib3:   secondary bus     6
pcib3:   subordinate bus   7
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xf4000000-0xf7ffffff
pcib3:   no prefetched decode
pci6: <ACPI PCI bus> on pcib3
pci6: domain=0, physical bus=6
found->	vendor=0x1166, dev=0x0103, revid=0xc3
	domain=0, bus=6, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
pcib4: <PCI-PCI bridge> at device 0.0 on pci6
pcib4:   domain            0
pcib4:   secondary bus     7
pcib4:   subordinate bus   7
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xf4000000-0xf7ffffff
pcib4:   no prefetched decode
pci7: <PCI bus> on pcib4
pci7: domain=0, physical bus=7
found->	vendor=0x14e4, dev=0x164c, revid=0x12
	domain=0, bus=7, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf4000000, size 25, enabled
pcib4: requested memory range 0xf4000000-0xf5ffffff: good
pcib3: requested memory range 0xf4000000-0xf5ffffff: good
pcib2: requested memory range 0xf4000000-0xf5ffffff: good
pcib1: requested memory range 0xf4000000-0xf5ffffff: good
pcib3: matched entry for 6.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
pcib4: slot 0 INTA is routed to irq 17
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf4000000-0xf5ffffff irq 17 at device 0.0 on pci7
bce0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf4000000
bce0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
bce0: using IRQ 256 for MSI
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0036, rev. 6
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce0: bpf attached
bce0: Ethernet address: 00:1e:c9:b4:6a:6f
bce0: [MPSAFE]
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.0.3); Flags (MSI|MFW); MFW (UMP 1.1.9)
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci5
pcib5:   domain            0
pcib5:   secondary bus     8
pcib5:   subordinate bus   8
pcib5:   I/O decode        0xf000-0xfff
pcib5:   no prefetched decode
pci8: <ACPI PCI bus> on pcib5
pci8: domain=0, physical bus=8
pcib6: <PCI-PCI bridge> at device 0.3 on pci4
pcib6:   domain            0
pcib6:   secondary bus     9
pcib6:   subordinate bus   9
pcib6:   I/O decode        0xf000-0xfff
pcib6:   no prefetched decode
pci9: <PCI bus> on pcib6
pci9: domain=0, physical bus=9
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib7:   domain            0
pcib7:   secondary bus     1
pcib7:   subordinate bus   1
pcib7:   I/O decode        0xe000-0xefff
pcib7:   memory decode     0xfc300000-0xfc5fffff
pcib7:   no prefetched decode
pci1: <ACPI PCI bus> on pcib7
pci1: domain=0, physical bus=1
found->	vendor=0x1000, dev=0x0058, revid=0x08
	domain=0, bus=1, slot=0, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 1 message in map 0x14
	map[10]: type I/O Port, range 32, base 0xec00, size  8, enabled
pcib7: requested I/O range 0xec00-0xecff: in range
	map[14]: type Memory, range 64, base 0xfc4fc000, size 14, enabled
pcib7: requested memory range 0xfc4fc000-0xfc4fffff: good
	map[1c]: type Memory, range 64, base 0xfc4e0000, size 16, enabled
pcib7: requested memory range 0xfc4e0000-0xfc4effff: good
pcib7: matched entry for 1.0.INTA
pcib7: slot 0 INTA hardwired to IRQ 16
mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfc4fc000-0xfc4fffff,0xfc4e0000-0xfc4effff irq 16 at device 0.0 on pci1
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xec00
mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xfc4fc000
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 50
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.14.0
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib8:   domain            0
pcib8:   secondary bus     10
pcib8:   subordinate bus   10
pcib8:   I/O decode        0xf000-0xfff
pcib8:   no prefetched decode
pci10: <ACPI PCI bus> on pcib8
pci10: domain=0, physical bus=10
pcib9: <PCI-PCI bridge> at device 5.0 on pci0
pcib9:   domain            0
pcib9:   secondary bus     11
pcib9:   subordinate bus   11
pcib9:   I/O decode        0xf000-0xfff
pcib9:   no prefetched decode
pci11: <PCI bus> on pcib9
pci11: domain=0, physical bus=11
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib10:   domain            0
pcib10:   secondary bus     12
pcib10:   subordinate bus   12
pcib10:   I/O decode        0xf000-0xfff
pcib10:   no prefetched decode
pci12: <ACPI PCI bus> on pcib10
pci12: domain=0, physical bus=12
pcib11: <PCI-PCI bridge> at device 7.0 on pci0
pcib11:   domain            0
pcib11:   secondary bus     13
pcib11:   subordinate bus   13
pcib11:   I/O decode        0xf000-0xfff
pcib11:   no prefetched decode
pci13: <PCI bus> on pcib11
pci13: domain=0, physical bus=13
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib12:   domain            0
pcib12:   secondary bus     2
pcib12:   subordinate bus   3
pcib12:   I/O decode        0xf000-0xfff
pcib12:   memory decode     0xf8000000-0xfbffffff
pcib12:   no prefetched decode
pci2: <ACPI PCI bus> on pcib12
pci2: domain=0, physical bus=2
found->	vendor=0x1166, dev=0x0103, revid=0xc3
	domain=0, bus=2, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
pcib13: <PCI-PCI bridge> at device 0.0 on pci2
pcib13:   domain            0
pcib13:   secondary bus     3
pcib13:   subordinate bus   3
pcib13:   I/O decode        0xf000-0xfff
pcib13:   memory decode     0xf8000000-0xfbffffff
pcib13:   no prefetched decode
pci3: <PCI bus> on pcib13
pci3: domain=0, physical bus=3
found->	vendor=0x14e4, dev=0x164c, revid=0x12
	domain=0, bus=3, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf8000000, size 25, enabled
pcib13: requested memory range 0xf8000000-0xf9ffffff: good
pcib12: requested memory range 0xf8000000-0xf9ffffff: good
pcib12: matched entry for 2.0.INTA
pcib12: slot 0 INTA hardwired to IRQ 16
pcib13: slot 0 INTA is routed to irq 16
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
bce1: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf8000000
bce1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 51
bce1: using IRQ 257 for MSI
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0036, rev. 6
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce1: bpf attached
bce1: Ethernet address: 00:1e:c9:b4:6a:6d
bce1: [MPSAFE]
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.0.3); Flags (MSI|MFW); MFW (UMP 1.1.9)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xcce0-0xccff irq 21 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcce0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 52
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x0000
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xccc0-0xccdf irq 20 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xccc0
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 53
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x0000
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xcca0-0xccbf irq 21 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcca0
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x0000
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0xcc80-0xcc9f irq 20 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcc80
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x0000
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc600800-0xfc600bff irq 21 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfc600800
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib14:   domain            0
pcib14:   secondary bus     14
pcib14:   subordinate bus   14
pcib14:   I/O decode        0xd000-0xdfff
pcib14:   memory decode     0xfc100000-0xfc2fffff
pcib14:   prefetched decode 0xd8000000-0xdfffffff
pcib14:   Subtractively decoded bridge.
pci14: <ACPI PCI bus> on pcib14
pci14: domain=0, physical bus=14
found->	vendor=0x1002, dev=0x515e, revid=0x02
	domain=0, bus=14, slot=13, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x01a7, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=6
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xd8000000, size 27, enabled
pcib14: requested memory range 0xd8000000-0xdfffffff: good
	map[14]: type I/O Port, range 32, base 0xdc00, size  8, enabled
pcib14: requested I/O range 0xdc00-0xdcff: in range
	map[18]: type Memory, range 32, base 0xfc2d0000, size 16, enabled
pcib14: requested memory range 0xfc2d0000-0xfc2dffff: good
pcib14: matched entry for 14.13.INTA
pcib14: slot 13 INTA hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 0xd8000000-0xdfffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on pci14
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54
ata0: [MPSAFE]
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port 0xcc78-0xcc7f,0xcc70-0xcc73,0xcc60-0xcc67,0xcc58-0xcc5b,0xcc40-0xcc4f mem 0xfc600400-0xfc6007ff irq 23 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc40
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55
atapci1: [MPSAFE]
atapci1: [ITHREAD]
pci0: child atapci1 requested type 4 for rid 0x24, but the BAR says it is an memio
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc78
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xcc70
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcc60
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xcc58
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 57
uart1: [FILTER]
uart1: fast interrupt
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
cpu4: <ACPI CPU> on acpi0
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
cpu5: <ACPI CPU> on acpi0
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
cpu6: <ACPI CPU> on acpi0
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
cpu7: <ACPI CPU> on acpi0
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
isa_probe_children: disabling PnP devices
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
atrtc: atrtc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xffffffff (1)
atkbd: failed to reset the keyboard.
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: failed to reset the aux device.
ppc0 failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 1021109 -> 100000
lapic: Divisor 2, Frequency 166435872 hz
Timecounter "TSC" frequency 2496538027 Hz quality -100
Timecounters tick every 1.111 msec
crypto: <crypto device>
vlan: initialized, using hash tables with chaining
IPsec: Initialized Security Association Processing.
enc0: bpf attached
lo0: bpf attached
pflog0: bpf attached
ata0: Identifying devices: 00010000
ata0: New devices: 00010000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 63XXESB2 chip
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acd0: setting UDMA33 on 63XXESB2 chip
acd0: <TEAC DVD-ROM DV28EV/D.AE> DVDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 198KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2: Identifying devices: 00000000
ata2: New devices: 00000000
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ipmi0: IPMI device rev. 0, firmware rev. 2.2, version 2.0
ipmi0: Number of channels 4
ipmi0: Attached watchdog
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
(probe67:mpt0:1:3:0): error 22
(probe67:mpt0:1:3:0): Unretryable Error
(probe68:mpt0:1:4:0): error 22
(probe68:mpt0:1:4:0): Unretryable Error
(probe69:mpt0:1:5:0): error 22
(probe69:mpt0:1:5:0): Unretryable Error
(probe70:mpt0:1:6:0): error 22
(probe70:mpt0:1:6:0): Unretryable Error
(probe71:mpt0:1:7:0): error 22
(probe71:mpt0:1:7:0): Unretryable Error
(probe64:mpt0:1:0:0): error 22
(probe64:mpt0:1:0:0): Unretryable Error
(probe65:mpt0:1:1:0): error 22
(probe65:mpt0:1:1:0): Unretryable Error
(probe66:mpt0:1:2:0): error 22
(probe66:mpt0:1:2:0): Unretryable Error
(probe72:mpt0:1:8:0): error 22
(probe72:mpt0:1:8:0): Unretryable Error
(probe73:mpt0:1:9:0): error 22
(probe73:mpt0:1:9:0): Unretryable Error
(probe74:mpt0:1:10:0): error 22
(probe74:mpt0:1:10:0): Unretryable Error
(probe75:mpt0:1:11:0): error 22
(probe75:mpt0:1:11:0): Unretryable Error
(probe76:mpt0:1:12:0): error 22
(probe76:mpt0:1:12:0): Unretryable Error
(probe77:mpt0:1:13:0): error 22
(probe77:mpt0:1:13:0): Unretryable Error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): Down reving Protocol Version from 2 to 0?
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY asc:3a,1
(probe0:ata0:0:0:0): Medium not present - tray closed
(probe0:ata0:0:0:0): (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata0:0:0:0): NOT READY asc:3a,1
(probe0:ata0:0:0:0): Medium not present - tray closed
Unretryable error
(probe0:ata0:0:0:0): error 6
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 6
(probe0:ata0:0:0:0): Unretryable Error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe9:mpt0:0:8:0): error 22
(probe9:mpt0:0:8:0): Unretryable Error
(probe9:mpt0:0:8:0): Unexpected Bus Free
(probe9:mpt0:0:8:0): Retrying Command
(probe9:mpt0:0:8:0): Unexpected Bus Free
(probe9:mpt0:0:8:0): Retrying Command
(probe9:mpt0:0:8:0): Unexpected Bus Free
(probe9:mpt0:0:8:0): Retrying Command
(probe9:mpt0:0:8:0): Unexpected Bus Free
(probe9:mpt0:0:8:0): Retrying Command
(probe9:mpt0:0:8:0): Unexpected Bus Free
(probe9:mpt0:0:8:0): error 5
(probe9:mpt0:0:8:0): Retries Exhausted
pass0 at mpt0 bus 0 target 0 lun 0
pass0: <ATA Hitachi HUA72107 A74A> Fixed Direct Access SCSI-5 device 
pass0: Serial Number       GTF200P8GPK41F
pass0: 300.000MB/s transfers
pass0: Command Queueing enabled
da0 at mpt0 bus 0 target 0 lun 0
da0: <ATA Hitachi HUA72107 A74A> Fixed Direct Access SCSI-5 device 
da0: Serial Number       GTF200P8GPK41F
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <ATA WDC WD1001FALS-0 0K05> Fixed Direct Access SCSI-5 device 
da1: Serial Number      WD-WMATV0911702
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
GEOM: new disk da0
GEOM: new disk da1
pass1 at mpt0 bus 0 target 1 lun 0
pass1: <ATA WDC WD1001FALS-0 0K05> Fixed Direct Access SCSI-5 device 
pass1: Serial Number      WD-WMATV0911702
pass1: 300.000MB/s transfers
pass1: Command Queueing enabled
pass2 at mpt0 bus 0 target 8 lun 0
pass2: <DP BACKPLANE 1.05> Fixed Enclosure Services SCSI-5 device 
pass2: 300.000MB/s transfers
pass3 at ata0 bus 0 target 0 lun 0
pass3: <TEAC DVD-ROM DV28EV D.AE> Removable CD-ROM SCSI-0 device 
pass3: 33.000MB/s transfers
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <DP BACKPLANE 1.05> Fixed Enclosure Services SCSI-5 device 
ses0: 300.000MB/s transfers
ses0: SCSI-3 SES Device
ATA PseudoRAID loaded
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable ErrorSMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cpu1 AP:
cd0: 
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff<TEAC DVD-ROM DV28EV D.AE> Removable CD-ROM SCSI-0 device 
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
cd0: 33.000MB/s transfers
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400

cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #4 Launched!
cpu4 AP:
     ID: 0x04000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #6 Launched!
cpu6 AP:
     ID: 0x06000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #5 Launched!
cpu5 AP:
     ID: 0x05000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #7 Launched!
cpu7 AP:
     ID: 0x07000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 2 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 4 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 5 vector 48
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 6 vector 48
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 7 vector 48
msi: Assigning MSI IRQ 256 to local APIC 1 vector 49
msi: Assigning MSI IRQ 257 to local APIC 2 vector 49
GEOM: new disk cd0
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
ugen4.2: <vendor 0x413c> at usbus4
uhub5: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on usbus4
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
Root mount waiting for: usbus4
uhub5: 2 ports with 2 removable, self powered
ugen4.3: <Dell> at usbus4
ukbd0: <Keyboard> on usbus4
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: <Mouse> on usbus4
ums0: 3 buttons and [Z] coordinates ID=0
Root mount waiting for: usbus4
ugen4.4: <vendor 0x04b4> at usbus4
uhub6: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 4> on usbus4
Root mount waiting for: usbus4
uhub6: 4 ports with 4 removable, self powered
usb_alloc_device:1589: set address 5 failed (USB_ERR_STALLED, ignored)
Root mount waiting for: usbus4
usb_alloc_device:1627: getting device descriptor at addr 5 failed, USB_ERR_STALLED!
usbd_req_re_enumerate:1539: addr=5, set address failed! (USB_ERR_STALLED, ignored)
usbd_req_re_enumerate:1553: getting device descriptor at addr 5 failed, USB_ERR_STALLED!
Root mount waiting for: usbus4
usbd_req_re_enumerate:1539: addr=5, set address failed! (USB_ERR_STALLED, ignored)
usbd_req_re_enumerate:1553: getting device descriptor at addr 5 failed, USB_ERR_STALLED!
ugen4.5: <(null)> at usbus4 (disconnected)
uhub_reattach_port:435: could not allocate new device!
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
ct_to_ts([2009-07-21 10:51:58]) = 1248173518.000000000
start_init: trying /sbin/init
WARNING: /var was not properly dismounted
WARNING: /compat was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /usr/local was not properly dismounted
WARNING: /usr/obj was not properly dismounted
WARNING: /usr/ports was not properly dismounted
WARNING: /usr/src was not properly dismounted
WARNING: /scratch was not properly dismounted
procfs registered
Linux ELF exec handler installed
linprocfs registered
linsysfs registered
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 13
ZFS storage pool version 13
bce0: Gigabit link up!
ts_to_ct(1248173534.061403117) = [2009-07-21 10:52:14]
e
ugen4.5: <vendor 0x046a> at usbus4
ukbd1: <vendor 0x046a product 0x0011, class 0/0, rev 2.00/1.00, addr 5> on usbus4
kbd3 at ukbd1
kbd3: ukbd1, generic (0), config:0x0, flags:0x3d0000
nfs server pid1126@thusnelda:/extern: not responding
nfs server pid1126@thusnelda:/extern: is alive again

--------------080706080008040609070704--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A65A710.5050508>