Date: Thu, 31 Aug 2006 13:41:49 -0700 From: "Josh Carroll" <josh.carroll@psualum.com> To: freebsd-current@freebsd.org Subject: Re: atapi/IDE DVD problem Message-ID: <8cb6106e0608311341v2170440fy6247cfb01db47490@mail.gmail.com> In-Reply-To: <8cb6106e0608301940j63391a40mdb92b4df2d5ea4a1@mail.gmail.com> References: <8cb6106e0608301317y21a131a4q6fe78b3a2565a9b7@mail.gmail.com> <8cb6106e0608301940j63391a40mdb92b4df2d5ea4a1@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I purchased an Adaptec ASH-1233 ATA/133 PCI card today, and the same problem persists. So it's not the controller or motherboard. Nor is it the DVD device, since the same problem occurs for an old 52x CDROM drive I have. Thanks, Josh On 8/30/06, Josh Carroll <josh.carroll@gmail.com> wrote: > I was able to get it booted with the DVD powered and on the ata4 > channel. Touching either the disk or that DVD device on the channel > results in the hangs previously mentioned. > > I was, however, able to get a dmesg with the DVD plugged in, along > with pciconf -l and atacontrol list output (see below). Hopefully this > provides a bit more info for debugging. > > Thanks, > Josh *snip*
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8cb6106e0608311341v2170440fy6247cfb01db47490>