Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 10 Dec 2021 12:30:23 GMT
From:      Andriy Gapon <avg@FreeBSD.org>
To:        src-committers@FreeBSD.org, dev-commits-src-all@FreeBSD.org, dev-commits-src-branches@FreeBSD.org
Subject:   git: 0f048f199e69 - stable/13 - twsi: unify error handling, explicitly handle more conditions
Message-ID:  <202112101230.1BACUNsR064999@gitrepo.freebsd.org>

next in thread | raw e-mail | index | archive | help
The branch stable/13 has been updated by avg:

URL: https://cgit.FreeBSD.org/src/commit/?id=0f048f199e69da73936665c72550a3a5fe8c4f1d

commit 0f048f199e69da73936665c72550a3a5fe8c4f1d
Author:     Andriy Gapon <avg@FreeBSD.org>
AuthorDate: 2021-11-26 07:44:30 +0000
Commit:     Andriy Gapon <avg@FreeBSD.org>
CommitDate: 2021-12-10 12:30:12 +0000

    twsi: unify error handling, explicitly handle more conditions
    
    twsi_error() is a new function that stops the current transfer and sets
    up softc when an error condition is detected.
    TWSI_STATUS_DATA_WR_NACK, TWSI_STATUS_BUS_ERROR and
    TWSI_STATUS_ARBITRATION_LOST are now handled explicitly rather than
    via the catch-all unknown status.
    
    Also, twsi_intr() now calls wakeup() in a single place when the
    transfer is finished.
    
    (cherry picked from commit a4fe8922085dfc1e5e6a6bac73ccc738e373165f)
---
 sys/dev/iicbus/twsi/twsi.c | 46 ++++++++++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 14 deletions(-)

diff --git a/sys/dev/iicbus/twsi/twsi.c b/sys/dev/iicbus/twsi/twsi.c
index 384e19e120b9..ecadfade04d9 100644
--- a/sys/dev/iicbus/twsi/twsi.c
+++ b/sys/dev/iicbus/twsi/twsi.c
@@ -543,6 +543,19 @@ twsi_transfer(device_t dev, struct iic_msg *msgs, uint32_t nmsgs)
 	return (error);
 }
 
+static void
+twsi_error(struct twsi_softc *sc, int err)
+{
+	/*
+	 * Must send stop condition to abort the current transfer.
+	 */
+	debugf(sc, "Sending STOP condition for error %d\n", err);
+	sc->transfer = 0;
+	sc->error = err;
+	sc->control_val = 0;
+	TWSI_WRITE(sc, sc->reg_control, sc->control_val | TWSI_CONTROL_STOP);
+}
+
 static void
 twsi_intr(void *arg)
 {
@@ -604,13 +617,13 @@ twsi_intr(void *arg)
 
 	case TWSI_STATUS_ADDR_W_NACK:
 	case TWSI_STATUS_ADDR_R_NACK:
-		debugf(sc, "No ack received after transmitting the address\n");
-		sc->transfer = 0;
-		sc->error = IIC_ENOACK;
-		sc->control_val = 0;
-		wakeup(sc);
+		debugf(sc, "Address NACK-ed\n");
+		twsi_error(sc, IIC_ENOACK);
+		break;
+	case TWSI_STATUS_DATA_WR_NACK:
+		debugf(sc, "Data byte NACK-ed\n");
+		twsi_error(sc, IIC_ENOACK);
 		break;
-
 	case TWSI_STATUS_DATA_WR_ACK:
 		debugf(sc, "Ack received after transmitting data\n");
 		if (sc->sent_bytes == sc->msgs[sc->msg_idx].len) {
@@ -684,12 +697,17 @@ twsi_intr(void *arg)
 		sc->error = 0;
 		break;
 
+	case TWSI_STATUS_BUS_ERROR:
+		debugf(sc, "Bus error\n");
+		twsi_error(sc, IIC_EBUSERR);
+		break;
+	case TWSI_STATUS_ARBITRATION_LOST:
+		debugf(sc, "Arbitration lost\n");
+		twsi_error(sc, IIC_EBUSBSY);
+		break;
 	default:
-		debugf(sc, "status=%x hot handled\n", status);
-		sc->transfer = 0;
-		sc->error = IIC_EBUSERR;
-		sc->control_val = 0;
-		wakeup(sc);
+		debugf(sc, "unexpected status 0x%x\n", status);
+		twsi_error(sc, IIC_ESTATUS);
 		break;
 	}
 	debugf(sc, "Refresh reg_control\n");
@@ -701,11 +719,11 @@ end:
 	TWSI_WRITE(sc, sc->reg_control, sc->control_val |
 	    (sc->iflag_w1c ? TWSI_CONTROL_IFLG : 0));
 
-	debugf(sc, "Done with interrupts\n\n");
-	if (transfer_done == 1) {
+	if (transfer_done == 1)
 		sc->transfer = 0;
+	debugf(sc, "Done with interrupt, transfer = %d\n", sc->transfer);
+	if (sc->transfer == 0)
 		wakeup(sc);
-	}
 	mtx_unlock(&sc->mutex);
 }
 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202112101230.1BACUNsR064999>