Date: Tue, 30 Sep 1997 20:21:27 -0700 (PDT) From: asami@cs.berkeley.edu (Satoshi Asami) To: se@freebsd.org Cc: mobile@freebsd.org Subject: chipset IDs for mobile PCs Message-ID: <199710010321.UAA01822@silvia.HIP.Berkeley.EDU>
next in thread | raw e-mail | index | archive | help
The patch is relative to RELENG_2_2. I got the datasheets from http://developer.intel.com/design/pcisets/datashts/ ------- Index: pcisupport.c =================================================================== RCS file: /usr/cvs/src/sys/pci/pcisupport.c,v retrieving revision 1.40.2.4 diff -u -r1.40.2.4 pcisupport.c --- pcisupport.c 1997/07/18 19:48:22 1.40.2.4 +++ pcisupport.c 1997/10/01 03:07:31 @@ -136,6 +136,10 @@ return ("Intel 82371FB PCI-ISA bridge"); case 0x12308086: return ("Intel 82371FB IDE interface"); + case 0x12348086: + return ("Intel 82371MX mobile PCI I/O IDE accelerator (MPIIX)"); + case 0x12358086: + return ("Intel 82437MX mobile PCI cache memory controller"); case 0x12508086: return ("Intel 82439"); case 0x04061039: ------- The 82371 is referred to as both "MX" and "MB" in their datasheets. I went with the majority (for one, it is called "MX" in 82371's own datasheet). Also, Intel's official name for the 82371MX is "Mobile PCI I/O IDE Xcelerator (MPIIX)". I thought we can avoid that kind of ugliness. BTW, this is the output of boot -v after the patch. ------- Copyright (c) 1992-1997 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2-STABLE #4: Tue Sep 30 20:08:24 PDT 1997 asami@bubble:/h/src/sys/compile/BUBBLE Calibrating clock(s) ... i586 clock: 166208807 Hz, i8254 clock: 1193295 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_I586_CALIBRATION not specified - using old calibration method CPU: Pentium (166.19-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x544 Stepping=4 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 50331648 (49152K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x001fd000 - 0x02ffdfff, 48238592 bytes (11777 pages) avail memory = 47435776 (46324K bytes) Initializing PC-card drivers: ep sio wdc pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x80000050 pcibus_setup(1a): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 is there (id=12358086) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 <Intel 82437MX mobile PCI cache memory controller> rev 2 on pci0:0 chip1 <Intel 82371MX mobile PCI I/O IDE accelerator (MPIIX)> rev 3 on pci0:1 vga0 <VGA-compatible display device> rev 211 int a irq ?? on pci0:3 mapreg[10] type=0 addr=08000000 size=400000. mapreg[14] type=0 addr=08400000 size=10000. mapreg[18] type=0 addr=08800000 size=400000. pcic0 <Cirrus Logic PD6729/6730 PC-Card Controller> rev 226 int a irq ?? on pci0:19 mapreg[10] type=1 addr=000003e0 size=0004. pci0: uses 8454144 bytes of memory from 8000000 upto 8bfffff. pci0: uses 4 bytes of I/O space from 3e0 upto 3e3. Probing for devices on the ISA bus: sc0: the current keyboard controller command byte 0045 kbdio: DIAGNOSE status:0055 kbdio: TEST_KBD_PORT status:0000 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0 at 0x60-0x6f irq 1 on motherboard sc0: BIOS video mode:3 sc0: VGA registers upon power-up 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 05 50 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: video mode:24 sc0: VGA registers for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: VGA color <8 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 not found at 0x2f8 sio2 not found at 0x3e8 lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface bpf: lp0 attached psm0: current command byte:0045 kbdio: TEST_AUX_PORT status:0000 kbdio: RESET_AUX return code:00fa kbdio: RESET_AUX status:00aa kbdio: RESET_AUX ID:0000 psm0: status after reset 00 02 64 psm: status 00 00 64 (get_mouse_buttons) psm0: status 00 02 64 psm0 at 0x60-0x64 irq 12 on motherboard psm0: device ID 0, 2 buttons fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <IBM-DTNA-22110> wd0: 2016MB (4128768 sectors), 4096 cyls, 16 heads, 63 S/T, 512 B/S ep0 not found at 0x300 npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.1 imasks: bio c0004040, tty c0031092, net c0031092 PC-Card Cirrus Logic PD6729 (5 mem & 2 I/O windows) pcic: controller irq 3 BIOS Geometries: 0:03fe3f3f 0..1022=1023 cylinders, 0..63=64 heads, 1..63=63 sectors 0 accounted for Device configuration finished. Considering FFS root f/s. configure() finished. bpf: tun0 attached bpf: sl0 attached bpf: lo0 attached wd0s1: type 0xb, start 63, end = 1435391, size 1435329 : OK wd0s2: type 0xa, start 4120704, end = 4124735, size 4032 : OK wd0s3: type 0xa5, start 1435392, end = 4112639, size 2677248 : OK Card inserted, slot 1 ep0: utp/bnc[*UTP*] address 00:60:97:93:48:aa bpf: ep0 attached ------- Satoshi
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199710010321.UAA01822>