Date: Mon, 1 Mar 1999 15:38:23 +0000 (GMT) From: Mark Powell <M.S.Powell@ais.salford.ac.uk> To: freebsd-questions@freebsd.org, freebsd-bugs@freebsd.org Subject: 3.1-R nightly panic on news server whilst running expire. Message-ID: <Pine.BSF.4.05.9903011537040.7442-100000@plato.salford.ac.uk>
next in thread | raw e-mail | index | archive | help
Recently installed 3.1-R on an Apricot Shogun server. Some sort of
biggish Intel Motherboard with a single Pentium 133MHz on a single
CPU board.
The machine is setup as a news server running inn-2.2. I've got our
current news server feeding this box as a test. Ran fine for a few days,
but now panics everynight, during expire, judging by the time. I'm no
expert with working out why it's dumping so would appreciate some help.
The hardware previously ran for a couple of years with NT 3.51 with no
apparent problems. This is (was?) to be our first production FreeBSD
box if the test went well.. We plan to move all operations over to
FBSD; news, qmail, web cache, etc., but management aren't impressed
by this sort of thing :(
gdb -k output, from one evenings dump:
----
IdlePTD 2707456
initial pcb at 2338b8
panicstr: page fault
panic messages:
---
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xc
fault code = supervisor read, page not present
instruction pointer = 0x8:0xf0174a5f
stack pointer = 0x10:0xf76b6f38
frame pointer = 0x10:0xf7868aa0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 2 (pagedaemon)
interrupt mask =
trap number = 12
panic: page fault
syncing disks... 139 105 79 25 done
dumping to dev 20401, offset 1277180
dump 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 6
5 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 3
2 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
---
#0 boot (howto=Cannot access memory at address 0x1c.
) at ../../kern/kern_shutdown.c:285
285 dumppcb.pcb_cr3 = rcr3();
(kgdb) where
#0 boot (howto=Cannot access memory at address 0x1c.
) at ../../kern/kern_shutdown.c:285
#1 0xf0149f32 in boot (howto=Cannot access memory at address 0x1c.
) at ../../kern/kern_shutdown.c:287
Cannot access memory at address 0x4.
-----
And from the next evening:
-----
IdlePTD 2707456
initial pcb at 2338b8
panicstr: page fault
panic messages:
---
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xc
fault code = supervisor read, page not present
instruction pointer = 0x8:0xf0174a5f
stack pointer = 0x10:0xf76b6f38
frame pointer = 0x10:0xf7dcb440
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 2 (pagedaemon)
interrupt mask =
trap number = 12
panic: page fault
syncing disks... 32 15 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 giving up
dumping to dev 20401, offset 1277180
dump 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
---
#0 boot (howto=Cannot access memory at address 0x2c.
) at ../../kern/kern_shutdown.c:285
285 dumppcb.pcb_cr3 = rcr3();
(kgdb) where
#0 boot (howto=Cannot access memory at address 0x2c.
) at ../../kern/kern_shutdown.c:285
#1 0xf0149f32 in boot (howto=Cannot access memory at address 0x2c.
) at ../../kern/kern_shutdown.c:287
Cannot access memory at address 0x14.
-----
The config file used is:
-----
machine "i386"
cpu "I586_CPU"
cpu "I686_CPU"
ident SQUID
maxusers 128
options "NMBCLUSTERS=8192"
options INET
options FFS
options FFS_ROOT
options "SOFTUPDATES"
options "AUTO_EOI_1"
options "COMPAT_43"
options SCSI_REPORT_GEOMETRY
options SCSI_DELAY=0
options UCONSOLE
options FAILSAFE
options "INCLUDE_CONFIG_FILE"
options DDB
options DDB_UNATTENDED
config kernel root on da0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
controller ncr0
controller ahc0
controller dpt0
options DPT_ALLOW_MEMIO
controller scbus0
device da0
device sa0
device pass0
device cd0
options XSERVER
device npx0 at isa? port IO_NPX irq 13
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
device sio2 at isa? disable port "IO_COM3" tty irq 5
device sio3 at isa? disable port "IO_COM4" tty irq 9
device lpt0 at isa? port? tty irq 7
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device vga0 at isa? port ? conflicts
device sc0 at isa? tty
pseudo-device splash
controller pnp0
device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0
device fxp0
pseudo-device loop
pseudo-device ether
pseudo-device pty 16
pseudo-device speaker
pseudo-device vn 1
pseudo-device snp 2
options KTRACE
pseudo-device bpfilter 2
options USER_LDT
options SYSVSHM
options SYSVSEM
options SYSVMSG
options "MD5"
options "VM86"
options "ICMP_BANDLIM"
-----
dmesg output:
-----
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #0: Tue Feb 23 16:21:17 GMT 1999
root@mimas.salford.ac.uk:/usr/src/sys/compile/SQUID
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 132002493 Hz
CPU: Pentium/P54C (132.00-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 100663296 (98304K bytes)
avail memory = 94961664 (92736K bytes)
Preloaded elf kernel "kernel" at 0xf028b000.
Probing for devices on PCI bus 0:
chip0: <Intel 824?? host to PCI bridge> rev 0x02 on pci0.0.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x04 int a irq 11 on pci0.12.0
fxp0: Ethernet address 00:a0:c9:a4:3a:f2
chip1: <Intel 82375EB PCI-EISA bridge> rev 0x05 on pci0.14.0
Probing for devices on PCI bus 1:
chip3: <Intel 824?? host to PCI bridge> rev 0x02 on pci1.0.0
ahc0: <Adaptec aic7870 SCSI adapter> rev 0x03 int a irq 5 on pci1.13.0
ahc0: aic7870 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
ahc1: <Adaptec aic7870 SCSI adapter> rev 0x03 int a irq 11 on pci1.14.0
ahc1: aic7870 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: Host Adapter Bios disabled. Using default SCSI device parameters
dpt0: <DPT Caching SCSI RAID Controller> rev 0x02 int a irq 10 on pci1.15.0
dpt0: DPT PM3224A/9X-R W FW Rev. 07CH, 3 channels, 64 CCBs
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt-266140588: this driver is deprecated; use ppbus instead.
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
pcm0 not found
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
Intel Pentium detected, installing workaround for F00F bug
sa0 at dpt0 bus 0 target 2 lun 0
sa0: <Quantum DLT4000 CA19> Removable Sequential Access SCSI-2 device
da0 at dpt0 bus 0 target 0 lun 0
da0: <IBM OEM DFHSS4S 4141> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 4119MB (8436988 512 byte sectors: 255H 63S/T 525C)
da1 at dpt0 bus 0 target 1 lun 0
da1: <DPT RAID-0 7CH> Fixed Direct Access SCSI-2 device
da1: 20597MB (42183680 512 byte sectors: 255H 63S/T 2625C)
changing root device to da0s1a
cd0 at dpt0 bus 0 target 5 lun 0
cd0: <SONY CD-ROM CDU-76S 1.1a> Removable CD-ROM SCSI-2 device
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ahc1: Data Parity Error Detected during address or write data phase
-----
Many thanks in advance.
Mark Powell - System Administrator (UNIX) - Clifford Whitworth Building
A.I.S., University of Salford, Salford, Manchester, UK.
Tel: +44 161 295 5936 Fax: +44 161 295 5888 www.pgp.com for PGP key
M.S.Powell@ais.salfrd.ac.uk (spell salford correctly to reply to me)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9903011537040.7442-100000>