Date: Thu, 15 Feb 2001 20:19:50 +0100 From: Michael Bretterklieber <mbretter@inode.at> To: hardware@FreeBSD.org Subject: Athlon TB 700 w. Asus K7M vs. FreeBSD (2nd try) Message-ID: <3A8C2BD6.CA143C76@inode.at>
next in thread | raw e-mail | index | archive | help
Hi,
The problems with my Athlon Thunderbird 700 on an Asus K7M Motherboard
(Bios 1009) and FreeBSD 4.2 still exists. I didn't get a solution from
the FreeBSD-community to solve this problems.
Now I installed RedHat 7.0 Linux an it works. I think there is a bug in
the FreeBSD-kernel, witch slows down my system, because three other OS's
work without Problems (Linux, W98, Win2k).
Here's the problem-description again:
The system is very very slow, like on an old 386. Keyboard clicks are
delayed, its like I work over a slow network. I have this problems since
I updatet from an Athlon 500 to an Athlon Thunderbird 700.
I use already the latest BIOS from Asus.
dmesg:
kernel output:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #1: Sat Dec 2 21:47:42 CET 2000
root@worf.jawa.at:/usr/src/sys/compile/WORF
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (704.94-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 134152192 (131008K bytes)
config> q
avail memory = 127262720 (124280K bytes)
Preloaded elf kernel "kernel" at 0xc0354000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035409c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AMD-751 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AMD-751 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 5.0
irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at
device 4.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 9
chip1: <VIA 82C686 ACPI interface> at device 4.4 on pci0
pcm0: <VIA VT82C686A AC'97 Audio> port 0xd000-0xd003,0xd400-0xd4ff
irq
10 at device 4.5 on pci0
bktr0: <BrookTree 878> mem 0xeddfd000-0xeddfdfff irq 5 at device
14.0
on
pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Card has no configuration EEPROM. Cannot determine card
make.
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 14.1 irq 5
sym0: <810a> port 0xd800-0xd8ff mem 0xefffff00-0xefffffff irq 10
at
device 15.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using LOAD/STORE-based firmware.
de0: <Digital 21041 Ethernet> port 0xc800-0xc87f mem
0xeffffe80-0xeffffeff irq 9 at device 16.0 on pci0
de0: SMC 21041 [10Mb/s] pass 1.1
de0: address 00:00:c0:99:b5:bf
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 890C> PCL,MLC,PML
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
joy0 at port 0x201 on isa0
de0: enabling 10baseT port
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA66
ad2: 9641MB <IBM-DTTA-371010> [19590/16/63] at ata1-master UDMA33
ad3: 6197MB <IBM-DHEA-36481> [12592/16/63] at ata1-slave UDMA33
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(probe5:sym0:0:5:0): phase change 6-7 6@07e2ef8c resid=4.
Mounting root from ufs:/dev/ad0s3a
cd0 at sym0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-R PX-W8220T 1.01> Removable CD-ROM SCSI-2
device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not
present
- tray closed
da0 at sym0 bus 0 target 5 lun 0
da0: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device
da0: 3.300MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not
present
uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 9 at
device
4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
bye,
--
--------------------------------------
E-mail: Michael.Bretterklieber@jawa.at
----------------------------
JAWA MANAGEMENT und SOFTWARE
Liebenauer Hauptstr. 200
A-8041 GRAZ
Tel: ++43-(0)316-403274-12
Fax: ++43-(0)316-403274-10
GSM: ++43-(0)676-93 96 698
homepage: http://www.jawa.at
--------- privat -----------
E-mail: mbretter@inode.at
homepage: http://www.inode.at/mbretter
--------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A8C2BD6.CA143C76>