Date: Thu, 14 May 1998 09:39:25 -0500 (EST) From: Richard J Kuhns <rjk@grauel.com> To: current@FreeBSD.ORG Subject: machine locks up under X with brand-new kernel Message-ID: <13659.541.63828.569100@moran.grauel.com>
next in thread | raw e-mail | index | archive | help
I just finished rebuilding a kernel cvsuped about 20 minutes ago, which
made it about 9:15 EST.
When I start X, the machine locks up completely just after the gray screen
and mouse pointer appear. This machine is not on a network (other than
dialup) so I can't ping it, but none of the lights on the keyboard work.
Config info follows:
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #13: Sun May 10 18:52:09 EST 1998
rjk@moran.grauel.com:/usr/src/sys/compile/MORAN
Timecounter "i8254" frequency 1193182 Hz cost 3345 ns
Timecounter "TSC" frequency 199432642 Hz cost 275 ns
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping=9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
avail memory = 62947328 (61472K bytes)
Probing for devices on PCI bus 0:
Correcting Natoma config for non-SMP
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
vga0: <S3 ViRGE VX graphics accelerator> rev 0x02 int a irq 11 on pci0.19.0
ahc0: <Adaptec 2940 Ultra SCSI host adapter> rev 0x00 int a irq 10 on pci0.20.0
ahc0: aic7880 Single Channel, SCSI Id=7, 16/255 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
ahc0: target 0 Tagged Queuing Device
sd0 at scbus0 target 0 lun 0
sd0: <SEAGATE ST32550N 0014> type 0 fixed SCSI 2
sd0: Direct-Access 2047MB (4194058 512 byte sectors)
ahc0: target 1 Tagged Queuing Device
sd1 at scbus0 target 1 lun 0
sd1: <SEAGATE ST32550N 0021> type 0 fixed SCSI 2
sd1: Direct-Access 2047MB (4194058 512 byte sectors)
ahc0: target 3 Tagged Queuing Device
sd2 at scbus0 target 3 lun 0
sd2: <QUANTUM FIREBALL ST4.3S 0F0C> type 0 fixed SCSI 2
sd2: Direct-Access 4136MB (8471232 512 byte sectors)
ahc0:A:6: refuses synchronous negotiation. Using asynchronous transfers
st0 at scbus0 target 6 lun 0
st0: <ARCHIVE VIPER 2525 25462 -007> type 1 removable SCSI 1
st0: Sequential-Access density code 0x0, drive empty
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
pcm0 at 0x220 irq 5 drq 1 flags 0x15 on isa
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <FX240S/j01>, removable, intr, dma, iordis
wcd0: 4134Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: no disc inside, unlocked
npx0 on motherboard
npx0: INT 16 interface
WARNING: / was not properly dismounted.
--
Richard Kuhns rjk@grauel.com
PO Box 6249 Tel: (765)477-6000 \
100 Sawmill Road x319
Lafayette, IN 47903 (800)489-4891 /
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?13659.541.63828.569100>