Date: Tue, 25 Jul 2000 16:43:48 +1000 (EST) From: Gavin Cameron <gavin@itworks.com.au> To: stable@freebsd.org Subject: 2 problems with 4.1-RC Message-ID: <Pine.BSF.4.21.0007251635150.3353-200000@maybe.itworks.com.au>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi all,
I cvsupped this morning (Melbourne time), so my code is fairly recent
After installing a new world and building a new GENERIC kernel, I have two
problems:
Firstly, if I boot with the -cv options I don't get the visual config, my
screen scrolls forever with text that is too fast to read and never makes
it into the config menus
Secondly, after a reboot I cannot use the console's keyboard. I get my
console messages but cannot type anything in.
A dmesg from a -v boot is attached.
Thanks in advance
Gavin
[]-----------------------------------+------------------------------------[]
| Gavin Cameron | ITworks Consulting |
| Ph : +61 3 9642 5477 | Level 8, 488 Bourke Street |
| Fax : +61 3 9642 5499 | Melbourne, Victoria |
| Email : gavin@itworks.com.au | Australia, 3000 |
[]-----------------------------------+------------------------------------[]
[-- Attachment #2 --]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-RC #2: Tue Jul 25 23:39:30 EST 2000
gavin@gav1.itworks.com.au:/home/src/FreeBSD4/src/sys/compile/GENERIC
Calibrating clock(s) ... TSC clock: 274111549 Hz, i8254 clock: 1193272 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (274.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping = 3
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x00426000 - 0x03ff7fff, 62726144 bytes (15314 pages)
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
avail memory = 61161472 (59728K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fac70
bios32: Entry = 0xfb0f0 (c00fb0f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb120
pnpbios: Found PnP BIOS data at 0xc00fbc70
pnpbios: Entry = f0000:bc98 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc040d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086)
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7180, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x8086, dev=0x7181, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 00006900, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005000, size 4
found-> vendor=0x102b, dev=0x051b, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base e4000000, size 24
map[14]: type 1, range 32, base e5000000, size 14
map[18]: type 1, range 32, base e6000000, size 23
found-> vendor=0x10b8, dev=0x0005, revid=0x06
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00006800, size 8
map[14]: type 1, range 32, base e7000000, size 12
found-> vendor=0x9004, dev=0x8078, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 00006400, size 8
map[14]: type 1, range 32, base e7001000, size 12
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=05 status1=05
ata0: mask=03 status0=24 status1=24
ata0: devices = 0x0
ata0: probe allocation failed
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 status0=50 status1=00
ata1: mask=03 status0=52 status1=00
ata1: devices = 0x1
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6900-0x691f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port 1 power on failed, IOERROR
uhub0: port 2 power on failed, IOERROR
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> (vendor=0x102b, dev=0x051b) at 15.0 irq 10
tx0: <SMC 83c170> port 0x6800-0x68ff mem 0xe7000000-0xe7000fff irq 11 at device 19.0 on pci0
tx0: address 00:e0:29:0a:87:2f, type SMC9432TX, Auto-Neg 10Mbps using shared irq11.
bpf: tx0 attached
tx0: driver is using old-style compatability shims
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0x6400-0x64ff mem 0xe7001000-0xe7001fff irq 9 at device 20.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: High byte termination Enabled
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Downloading Sequencer Program... 415 instructions downloaded
Trying Read_Port at 203
Trying Read_Port at 243
CTL0045: start dependant
CTL0045: adding irq mask 0x20
CTL0045: adding dma mask 0x2
CTL0045: adding dma mask 0x20
CTL0045: adding io range 0x220-0x22f, size=0x10, align=0x1
CTL0045: adding io range 0x330-0x331, size=0x2, align=0x1
CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding dma mask 0xe0
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding dma mask 0xe0
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding dma mask 0xe0
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: start dependant
isa0: too many dependant configs (8)
CTL7002: start dependant
CTL7002: adding io range 0x200-0x207, size=0x8, align=0x1
CTL7002: start dependant
CTL7002: adding io range 0x200-0x20f, size=0x8, align=0x8
CTL7002: end dependant
CTL0022: start dependant
CTL0022: adding io range 0x620-0x623, size=0x4, align=0x1
CTL0022: start dependant
CTL0022: adding io range 0x620-0x683, size=0x4, align=0x20
CTL0022: end dependant
isa0: unexpected small tag 14
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata2: mask=03 status0=1a status1=1a
ata2: mask=03 status0=0b status1=0b
ata2: devices = 0x0
ata2: probe allocation failed
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
device_probe_and_attach: atkbd0 attach returned 6
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, terminal emulator: sc (syscons terminal)
pcic1: not probed (disabled)
sio0: irq maps: 0x63 0x73 0x73 0x73
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x63 0x6b 0x6b 0x6b
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230. Failing probe.
unknown0: <Audio> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
adv1: Invalid baseport of 0x200 specified. Nearest valid baseport is 0x210. Failing probe.
unknown1: <Game> at port 0x200-0x207 on isa0
adv1: Invalid baseport of 0x620 specified. Nearest valid baseport is 0x330. Failing probe.
unknown2: <WaveTable> at port 0x620-0x623 on isa0
BIOS Geometries:
0:020efe3f 0..526=527 cylinders, 0..254=255 heads, 1..63=63 sectors
1:01fe1f3f 0..510=511 cylinders, 0..31=32 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 688840, tty 630098, net 670898
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: faith0 attached
ata1-master: success setting up WDMA2 mode on PIIX4 chip
ad2: <QUANTUM FIREBALL_TM2110A/A6B.1F00> ATA-0 disk at ata1 as master
ad2: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
ad2: 16 secs/int, 1 depth queue, WDMA2
ad2: piomode=4 dmamode=2 udmamode=-1 cblid=0
Creating DISK ad2
Creating DISK wd2
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe1:ahc0:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe1:ahc0:0:1:0): ILLEGAL REQUEST asc:24,0
(probe1:ahc0:0:1:0): Invalid field in CDB
ahc0: target 1 synchronous at 10.0MHz, offset = 0xf
ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
Creating DISK da0
Creating DISK cd0
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <QUANTUM FIREBALL ST4.3S 0F0C> Fixed Direct Access SCSI-2 device
pass0: Serial Number 154723244240
pass0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <PIONEER CD-ROM DR-U06S 1.04> Removable CD-ROM SCSI-2 device
pass1: 10.000MB/s transfers (10.000MHz, offset 15)
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL ST4.3S 0F0C> Fixed Direct Access SCSI-2 device
da0: Serial Number 154723244240
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 4136MB (8471232 512 byte sectors: 255H 63S/T 527C)
(cd0:ahc0:0:1:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ahc0:0:1:0): NOT READY asc:3a,0
(cd0:ahc0:0:1:0): Medium not present
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <PIONEER CD-ROM DR-U06S 1.04> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0s1: type 0xa5, start 0, end = 8471231, size 8471232
da0s1: C/H/S end 527/78/63 (2627855) != end 8471231: invalid
WARNING: / was not properly dismounted
start_init: trying /sbin/init
(da0:ahc0:0:0:0): tagged openings now 8
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0007251635150.3353-200000>