Date: Tue, 23 Sep 2014 05:37:18 +0000 (UTC) From: Rui Paulo <rpaulo@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r272015 - in head/sys: conf dev/ncr modules modules/ncr pci Message-ID: <201409230537.s8N5bI0o060375@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: rpaulo Date: Tue Sep 23 05:37:17 2014 New Revision: 272015 URL: http://svnweb.freebsd.org/changeset/base/272015 Log: Move pci/ncr to dev/ncr. Added: head/sys/dev/ncr/ head/sys/dev/ncr/locate.pl - copied unchanged from r272014, head/sys/pci/locate.pl head/sys/dev/ncr/ncr.c - copied, changed from r272005, head/sys/pci/ncr.c head/sys/dev/ncr/ncrreg.h - copied unchanged from r272005, head/sys/pci/ncrreg.h head/sys/modules/ncr/ head/sys/modules/ncr/Makefile (contents, props changed) Deleted: head/sys/pci/locate.pl head/sys/pci/ncr.c head/sys/pci/ncrreg.h Modified: head/sys/conf/files head/sys/conf/options head/sys/modules/Makefile Modified: head/sys/conf/files ============================================================================== --- head/sys/conf/files Tue Sep 23 04:13:21 2014 (r272014) +++ head/sys/conf/files Tue Sep 23 05:37:17 2014 (r272015) @@ -1965,6 +1965,8 @@ dev/nand/nandsim_ctrl.c optional nandsi dev/nand/nandsim_log.c optional nandsim nand dev/nand/nandsim_swap.c optional nandsim nand dev/nand/nfc_if.m optional nand +dev/ncr/ncr.c optional ncr pci \ + compile-with "${NORMAL_C} -Wno-unused" dev/ncv/ncr53c500.c optional ncv dev/ncv/ncr53c500_pccard.c optional ncv pccard dev/netmap/netmap.c optional netmap @@ -3868,8 +3870,6 @@ pci/alpm.c optional alpm pci pci/amdpm.c optional amdpm pci | nfpm pci pci/amdsmb.c optional amdsmb pci pci/intpm.c optional intpm pci -pci/ncr.c optional ncr pci \ - compile-with "${NORMAL_C} -Wno-unused" pci/nfsmb.c optional nfsmb pci pci/viapm.c optional viapm pci rpc/auth_none.c optional krpc | nfslockd | nfsclient | nfsserver | nfscl | nfsd Modified: head/sys/conf/options ============================================================================== --- head/sys/conf/options Tue Sep 23 04:13:21 2014 (r272014) +++ head/sys/conf/options Tue Sep 23 05:37:17 2014 (r272015) @@ -363,7 +363,7 @@ SYM_SETUP_PCI_PARITY opt_sym.h #-PCI par SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported # default:8, range:[1..64] -# Options used only in pci/ncr.c +# Options used only in dev/ncr/* SCSI_NCR_DEBUG opt_ncr.h SCSI_NCR_MAX_SYNC opt_ncr.h SCSI_NCR_MAX_WIDE opt_ncr.h Copied: head/sys/dev/ncr/locate.pl (from r272014, head/sys/pci/locate.pl) ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/dev/ncr/locate.pl Tue Sep 23 05:37:17 2014 (r272015, copy of r272014, head/sys/pci/locate.pl) @@ -0,0 +1,45 @@ +#!/usr/bin/perl -w +# $FreeBSD$ + +use strict; + +if (!defined($ARGV[0])) { + print( +" +Perl script to convert NCR script address into label+offset. +Useful to find the failed NCR instruction ... + +usage: $0 <address> +"); + exit(1); +} + +my $errpos = hex($ARGV[0])/4; +my $ofs=0; + +open (INPUT, "cc -E ncr.c 2>/dev/null |"); + +while ($_ = <INPUT>) +{ + last if /^struct script \{/; +} + +while ($_ = <INPUT>) +{ + last if /^\}\;/; + my ($label, $size) = /ncrcmd\s+(\S+)\s+\[([^]]+)/; + $size = eval($size); + if (defined($label) && $label) { + if ($errpos) { + if ($ofs + $size > $errpos) { + printf ("%4x: %s\n", $ofs * 4, $label); + printf ("%4x: %s + %d\n", $errpos * 4, $label, $errpos - $ofs); + last; + } + $ofs += $size; + } else { + printf ("%4x: %s\n", $ofs * 4, $label); + } + } +} + Copied and modified: head/sys/dev/ncr/ncr.c (from r272005, head/sys/pci/ncr.c) ============================================================================== --- head/sys/pci/ncr.c Mon Sep 22 22:38:54 2014 (r272005, copy source) +++ head/sys/dev/ncr/ncr.c Tue Sep 23 05:37:17 2014 (r272015) @@ -197,7 +197,7 @@ __FBSDID("$FreeBSD$"); #include <dev/pci/pcivar.h> #include <dev/pci/pcireg.h> -#include <pci/ncrreg.h> +#include <dev/ncr/ncrreg.h> #include <cam/cam.h> #include <cam/cam_ccb.h> Copied: head/sys/dev/ncr/ncrreg.h (from r272005, head/sys/pci/ncrreg.h) ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/dev/ncr/ncrreg.h Tue Sep 23 05:37:17 2014 (r272015, copy of r272005, head/sys/pci/ncrreg.h) @@ -0,0 +1,574 @@ +/************************************************************************** +** +** $FreeBSD$ +** +** Device driver for the NCR 53C810 PCI-SCSI-Controller. +** +** 386bsd / FreeBSD / NetBSD +** +**------------------------------------------------------------------------- +** +** Written for 386bsd and FreeBSD by +** wolf@cologne.de Wolfgang Stanglmeier +** se@mi.Uni-Koeln.de Stefan Esser +** +** Ported to NetBSD by +** mycroft@gnu.ai.mit.edu +** +**------------------------------------------------------------------------- +*/ +/*- +** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved. +** +** Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions +** are met: +** 1. Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in the +** documentation and/or other materials provided with the distribution. +** 3. The name of the author may not be used to endorse or promote products +** derived from this software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR +** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, +** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +*************************************************************************** +*/ + +#ifndef __NCR_REG_H__ +#define __NCR_REG_H__ + +/*----------------------------------------------------------------- +** +** The ncr 53c810 register structure. +** +**----------------------------------------------------------------- +*/ + +struct ncr_reg { +/*00*/ u_char nc_scntl0; /* full arb., ena parity, par->ATN */ + +/*01*/ u_char nc_scntl1; /* no reset */ + #define ISCON 0x10 /* connected to scsi */ + #define CRST 0x08 /* force reset */ + +/*02*/ u_char nc_scntl2; /* no disconnect expected */ + #define SDU 0x80 /* cmd: disconnect will raise error */ + #define CHM 0x40 /* sta: chained mode */ + #define WSS 0x08 /* sta: wide scsi send [W]*/ + #define WSR 0x01 /* sta: wide scsi received [W]*/ + +/*03*/ u_char nc_scntl3; /* cnf system clock dependent */ + #define EWS 0x08 /* cmd: enable wide scsi [W]*/ + +/*04*/ u_char nc_scid; /* cnf host adapter scsi address */ + #define RRE 0x40 /* r/w:e enable response to resel. */ + #define SRE 0x20 /* r/w:e enable response to select */ + +/*05*/ u_char nc_sxfer; /* ### Sync speed and count */ + +/*06*/ u_char nc_sdid; /* ### Destination-ID */ + +/*07*/ u_char nc_gpreg; /* ??? IO-Pins */ + +/*08*/ u_char nc_sfbr; /* ### First byte in phase */ + +/*09*/ u_char nc_socl; + #define CREQ 0x80 /* r/w: SCSI-REQ */ + #define CACK 0x40 /* r/w: SCSI-ACK */ + #define CBSY 0x20 /* r/w: SCSI-BSY */ + #define CSEL 0x10 /* r/w: SCSI-SEL */ + #define CATN 0x08 /* r/w: SCSI-ATN */ + #define CMSG 0x04 /* r/w: SCSI-MSG */ + #define CC_D 0x02 /* r/w: SCSI-C_D */ + #define CI_O 0x01 /* r/w: SCSI-I_O */ + +/*0a*/ u_char nc_ssid; + +/*0b*/ u_char nc_sbcl; + +/*0c*/ u_char nc_dstat; + #define DFE 0x80 /* sta: dma fifo empty */ + #define MDPE 0x40 /* int: master data parity error */ + #define BF 0x20 /* int: script: bus fault */ + #define ABRT 0x10 /* int: script: command aborted */ + #define SSI 0x08 /* int: script: single step */ + #define SIR 0x04 /* int: script: interrupt instruct. */ + #define IID 0x01 /* int: script: illegal instruct. */ + +/*0d*/ u_char nc_sstat0; + #define ILF 0x80 /* sta: data in SIDL register lsb */ + #define ORF 0x40 /* sta: data in SODR register lsb */ + #define OLF 0x20 /* sta: data in SODL register lsb */ + #define AIP 0x10 /* sta: arbitration in progress */ + #define LOA 0x08 /* sta: arbitration lost */ + #define WOA 0x04 /* sta: arbitration won */ + #define IRST 0x02 /* sta: scsi reset signal */ + #define SDP 0x01 /* sta: scsi parity signal */ + +/*0e*/ u_char nc_sstat1; + #define FF3210 0xf0 /* sta: bytes in the scsi fifo */ + +/*0f*/ u_char nc_sstat2; + #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/ + #define ORF1 0x40 /* sta: data in SODR register msb[W]*/ + #define OLF1 0x20 /* sta: data in SODL register msb[W]*/ + #define LDSC 0x02 /* sta: disconnect & reconnect */ + +/*10*/ u_int32_t nc_dsa; /* --> Base page */ + +/*14*/ u_char nc_istat; /* --> Main Command and status */ + #define CABRT 0x80 /* cmd: abort current operation */ + #define SRST 0x40 /* mod: reset chip */ + #define SIGP 0x20 /* r/w: message from host to ncr */ + #define SEM 0x10 /* r/w: message between host + ncr */ + #define CON 0x08 /* sta: connected to scsi */ + #define INTF 0x04 /* sta: int on the fly (reset by wr)*/ + #define SIP 0x02 /* sta: scsi-interrupt */ + #define DIP 0x01 /* sta: host/script interrupt */ + +/*15*/ u_char nc_15_; +/*16*/ u_char nc_16_; +/*17*/ u_char nc_17_; + +/*18*/ u_char nc_ctest0; +/*19*/ u_char nc_ctest1; + +/*1a*/ u_char nc_ctest2; + #define CSIGP 0x40 + +/*1b*/ u_char nc_ctest3; + #define FLF 0x08 /* cmd: flush dma fifo */ + #define CLF 0x04 /* cmd: clear dma fifo */ + #define FM 0x02 /* mod: fetch pin mode */ + #define WRIE 0x01 /* mod: write and invalidate enable */ + +/*1c*/ u_int32_t nc_temp; /* ### Temporary stack */ + +/*20*/ u_char nc_dfifo; +/*21*/ u_char nc_ctest4; + #define BDIS 0x80 /* mod: burst disable */ + #define MPEE 0x08 /* mod: master parity error enable */ + +/*22*/ u_char nc_ctest5; + #define DFS 0x20 /* mod: dma fifo size */ +/*23*/ u_char nc_ctest6; + +/*24*/ u_int32_t nc_dbc; /* ### Byte count and command */ +/*28*/ u_int32_t nc_dnad; /* ### Next command register */ +/*2c*/ u_int32_t nc_dsp; /* --> Script Pointer */ +/*30*/ u_int32_t nc_dsps; /* --> Script pointer save/opcode#2 */ +/*34*/ u_int32_t nc_scratcha; /* ??? Temporary register a */ + +/*38*/ u_char nc_dmode; + #define BL_2 0x80 /* mod: burst length shift value +2 */ + #define BL_1 0x40 /* mod: burst length shift value +1 */ + #define ERL 0x08 /* mod: enable read line */ + #define ERMP 0x04 /* mod: enable read multiple */ + #define BOF 0x02 /* mod: burst op code fetch */ + +/*39*/ u_char nc_dien; +/*3a*/ u_char nc_dwt; + +/*3b*/ u_char nc_dcntl; /* --> Script execution control */ + #define CLSE 0x80 /* mod: cache line size enable */ + #define PFF 0x40 /* cmd: pre-fetch flush */ + #define PFEN 0x20 /* mod: pre-fetch enable */ + #define SSM 0x10 /* mod: single step mode */ + #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */ + #define STD 0x04 /* cmd: start dma mode */ + #define IRQD 0x02 /* mod: irq disable */ + #define NOCOM 0x01 /* cmd: protect sfbr while reselect */ + +/*3c*/ u_int32_t nc_adder; + +/*40*/ u_short nc_sien; /* -->: interrupt enable */ +/*42*/ u_short nc_sist; /* <--: interrupt status */ + #define STO 0x0400/* sta: timeout (select) */ + #define GEN 0x0200/* sta: timeout (general) */ + #define HTH 0x0100/* sta: timeout (handshake) */ + #define MA 0x80 /* sta: phase mismatch */ + #define CMP 0x40 /* sta: arbitration complete */ + #define SEL 0x20 /* sta: selected by another device */ + #define RSL 0x10 /* sta: reselected by another device*/ + #define SGE 0x08 /* sta: gross error (over/underflow)*/ + #define UDC 0x04 /* sta: unexpected disconnect */ + #define RST 0x02 /* sta: scsi bus reset detected */ + #define PAR 0x01 /* sta: scsi parity error */ + +/*44*/ u_char nc_slpar; +/*45*/ u_char nc_swide; +/*46*/ u_char nc_macntl; +/*47*/ u_char nc_gpcntl; +/*48*/ u_char nc_stime0; /* cmd: timeout for select&handshake*/ +/*49*/ u_char nc_stime1; /* cmd: timeout user defined */ +/*4a*/ u_short nc_respid; /* sta: Reselect-IDs */ + +/*4c*/ u_char nc_stest0; + +/*4d*/ u_char nc_stest1; + #define DBLEN 0x08 /* clock doubler running */ + #define DBLSEL 0x04 /* clock doubler selected */ + +/*4e*/ u_char nc_stest2; + #define ROF 0x40 /* reset scsi offset (after gross error!) */ + #define EXT 0x02 /* extended filtering */ + +/*4f*/ u_char nc_stest3; + #define TE 0x80 /* c: tolerAnt enable */ + #define HSC 0x20 /* c: Halt SCSI Clock */ + #define CSF 0x02 /* c: clear scsi fifo */ + +/*50*/ u_short nc_sidl; /* Lowlevel: latched from scsi data */ +/*52*/ u_char nc_stest4; + #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */ + #define SMODE_HVD 0x40 /* High Voltage Differential */ + #define SMODE_SE 0x80 /* Single Ended */ + #define SMODE_LVD 0xc0 /* Low Voltage Differential */ + #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */ + +/*53*/ u_char nc_53_; +/*54*/ u_short nc_sodl; /* Lowlevel: data out to scsi data */ +/*56*/ u_short nc_56_; +/*58*/ u_short nc_sbdl; /* Lowlevel: data from scsi data */ +/*5a*/ u_short nc_5a_; +/*5c*/ u_char nc_scr0; /* Working register B */ +/*5d*/ u_char nc_scr1; /* */ +/*5e*/ u_char nc_scr2; /* */ +/*5f*/ u_char nc_scr3; /* */ +/*60*/ +}; + +/*----------------------------------------------------------- +** +** Utility macros for the script. +** +**----------------------------------------------------------- +*/ + +#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r)) +#define REG(r) REGJ (nc_, r) + +#ifndef TARGET_MODE +#define TARGET_MODE 0 +#endif + +typedef u_int32_t ncrcmd; + +/*----------------------------------------------------------- +** +** SCSI phases +** +**----------------------------------------------------------- +*/ + +#define SCR_DATA_OUT 0x00000000 +#define SCR_DATA_IN 0x01000000 +#define SCR_COMMAND 0x02000000 +#define SCR_STATUS 0x03000000 +#define SCR_ILG_OUT 0x04000000 +#define SCR_ILG_IN 0x05000000 +#define SCR_MSG_OUT 0x06000000 +#define SCR_MSG_IN 0x07000000 + +/*----------------------------------------------------------- +** +** Data transfer via SCSI. +** +**----------------------------------------------------------- +** +** MOVE_ABS (LEN) +** <<start address>> +** +** MOVE_IND (LEN) +** <<dnad_offset>> +** +** MOVE_TBL +** <<dnad_offset>> +** +**----------------------------------------------------------- +*/ + +#define SCR_MOVE_ABS(l) ((0x08000000 ^ (TARGET_MODE << 1ul)) | (l)) +#define SCR_MOVE_IND(l) ((0x28000000 ^ (TARGET_MODE << 1ul)) | (l)) +#define SCR_MOVE_TBL (0x18000000 ^ (TARGET_MODE << 1ul)) + +struct scr_tblmove { + u_int32_t size; + u_int32_t addr; +}; + +/*----------------------------------------------------------- +** +** Selection +** +**----------------------------------------------------------- +** +** SEL_ABS | SCR_ID (0..7) [ | REL_JMP] +** <<alternate_address>> +** +** SEL_TBL | << dnad_offset>> [ | REL_JMP] +** <<alternate_address>> +** +**----------------------------------------------------------- +*/ + +#define SCR_SEL_ABS 0x40000000 +#define SCR_SEL_ABS_ATN 0x41000000 +#define SCR_SEL_TBL 0x42000000 +#define SCR_SEL_TBL_ATN 0x43000000 + +struct scr_tblsel { + u_char sel_0; + u_char sel_sxfer; + u_char sel_id; + u_char sel_scntl3; +}; + +#define SCR_JMP_REL 0x04000000 +#define SCR_ID(id) (((u_int32_t)(id)) << 16) + +/*----------------------------------------------------------- +** +** Waiting for Disconnect or Reselect +** +**----------------------------------------------------------- +** +** WAIT_DISC +** dummy: <<alternate_address>> +** +** WAIT_RESEL +** <<alternate_address>> +** +**----------------------------------------------------------- +*/ + +#define SCR_WAIT_DISC 0x48000000 +#define SCR_WAIT_RESEL 0x50000000 + +/*----------------------------------------------------------- +** +** Bit Set / Reset +** +**----------------------------------------------------------- +** +** SET (flags {|.. }) +** +** CLR (flags {|.. }) +** +**----------------------------------------------------------- +*/ + +#define SCR_SET(f) (0x58000000 | (f)) +#define SCR_CLR(f) (0x60000000 | (f)) + +#define SCR_CARRY 0x00000400 +#define SCR_TRG 0x00000200 +#define SCR_ACK 0x00000040 +#define SCR_ATN 0x00000008 + + +/*----------------------------------------------------------- +** +** Memory to memory move +** +**----------------------------------------------------------- +** +** COPY (bytecount) +** << source_address >> +** << destination_address >> +** +** SCR_COPY sets the NO FLUSH option by default. +** SCR_COPY_F does not set this option. +** +** For chips which do not support this option, +** ncr_copy_and_bind() will remove this bit. +**----------------------------------------------------------- +*/ + +#define SCR_NO_FLUSH 0x01000000 + +#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n)) +#define SCR_COPY_F(n) (0xc0000000 | (n)) + + +/*----------------------------------------------------------- +** +** Register move and binary operations +** +**----------------------------------------------------------- +** +** SFBR_REG (reg, op, data) reg = SFBR op data +** << 0 >> +** +** REG_SFBR (reg, op, data) SFBR = reg op data +** << 0 >> +** +** REG_REG (reg, op, data) reg = reg op data +** << 0 >> +** +**----------------------------------------------------------- +*/ + +#define SCR_REG_OFS(ofs) ((ofs) << 16ul) + +#define SCR_SFBR_REG(reg,op,data) \ + (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul)) + +#define SCR_REG_SFBR(reg,op,data) \ + (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul)) + +#define SCR_REG_REG(reg,op,data) \ + (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul)) + + +#define SCR_LOAD 0x00000000 +#define SCR_SHL 0x01000000 +#define SCR_OR 0x02000000 +#define SCR_XOR 0x03000000 +#define SCR_AND 0x04000000 +#define SCR_SHR 0x05000000 +#define SCR_ADD 0x06000000 +#define SCR_ADDC 0x07000000 + +/*----------------------------------------------------------- +** +** FROM_REG (reg) reg = SFBR +** << 0 >> +** +** TO_REG (reg) SFBR = reg +** << 0 >> +** +** LOAD_REG (reg, data) reg = <data> +** << 0 >> +** +** LOAD_SFBR(data) SFBR = <data> +** << 0 >> +** +**----------------------------------------------------------- +*/ + +#define SCR_FROM_REG(reg) \ + SCR_REG_SFBR(reg,SCR_OR,0) + +#define SCR_TO_REG(reg) \ + SCR_SFBR_REG(reg,SCR_OR,0) + +#define SCR_LOAD_REG(reg,data) \ + SCR_REG_REG(reg,SCR_LOAD,data) + +#define SCR_LOAD_SFBR(data) \ + (SCR_REG_SFBR (gpreg, SCR_LOAD, data)) + +/*----------------------------------------------------------- +** +** Waiting for Disconnect or Reselect +** +**----------------------------------------------------------- +** +** JUMP [ | IFTRUE/IFFALSE ( ... ) ] +** <<address>> +** +** JUMPR [ | IFTRUE/IFFALSE ( ... ) ] +** <<distance>> +** +** CALL [ | IFTRUE/IFFALSE ( ... ) ] +** <<address>> +** +** CALLR [ | IFTRUE/IFFALSE ( ... ) ] +** <<distance>> +** +** RETURN [ | IFTRUE/IFFALSE ( ... ) ] +** <<dummy>> +** +** INT [ | IFTRUE/IFFALSE ( ... ) ] +** <<ident>> +** +** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ] +** <<ident>> +** +** Conditions: +** WHEN (phase) +** IF (phase) +** CARRY +** DATA (data, mask) +** +**----------------------------------------------------------- +*/ + +#define SCR_NO_OP 0x80000000 +#define SCR_JUMP 0x80080000 +#define SCR_JUMPR 0x80880000 +#define SCR_CALL 0x88080000 +#define SCR_CALLR 0x88880000 +#define SCR_RETURN 0x90080000 +#define SCR_INT 0x98080000 +#define SCR_INT_FLY 0x98180000 + +#define IFFALSE(arg) (0x00080000 | (arg)) +#define IFTRUE(arg) (0x00000000 | (arg)) + +#define WHEN(phase) (0x00030000 | (phase)) +#define IF(phase) (0x00020000 | (phase)) + +#define DATA(D) (0x00040000 | ((D) & 0xff)) +#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff)) + +#define CARRYSET (0x00200000) + +/*----------------------------------------------------------- +** +** SCSI constants. +** +**----------------------------------------------------------- +*/ + +/* +** Messages +*/ +#define M_X_MODIFY_DP (0x00) + +/* +** Status +*/ +#define SCSI_STATUS_ILLEGAL (0xff) +#define SCSI_STATUS_SENSE (0x80) + +/* +** Bits defining chip features. +** For now only some of them are used, since we explicitely +** deal with PCI device id and revision id. +*/ +#define FE_LED0 (1<<0) +#define FE_WIDE (1<<1) +#define FE_ULTRA (1<<2) +#define FE_ULTRA2 (1<<3) +#define FE_DBLR (1<<4) +#define FE_QUAD (1<<5) +#define FE_ERL (1<<6) +#define FE_CLSE (1<<7) +#define FE_WRIE (1<<8) +#define FE_ERMP (1<<9) +#define FE_BOF (1<<10) +#define FE_DFS (1<<11) +#define FE_PFEN (1<<12) +#define FE_LDSTR (1<<13) +#define FE_RAM (1<<14) +#define FE_CLK80 (1<<15) +#define FE_DIFF (1<<16) +#define FE_BIOS (1<<17) +#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP) +#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_ULTRA2|FE_DBLR|FE_QUAD|F_CLK80) +#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM) + +#endif /*__NCR_REG_H__*/ Modified: head/sys/modules/Makefile ============================================================================== --- head/sys/modules/Makefile Tue Sep 23 04:13:21 2014 (r272014) +++ head/sys/modules/Makefile Tue Sep 23 05:37:17 2014 (r272015) @@ -242,7 +242,7 @@ SUBDIR= \ my \ ${_nandfs} \ ${_nandsim} \ - ${_ncp} \ + ${_ncr} \ ${_ncv} \ ${_ndis} \ netfpga10g \ @@ -537,6 +537,7 @@ _mlx4ib= mlx4ib _mlxen= mlxen _mthca= mthca .endif +_ncr= ncr _ncv= ncv _ndis= ndis _nsp= nsp Added: head/sys/modules/ncr/Makefile ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/modules/ncr/Makefile Tue Sep 23 05:37:17 2014 (r272015) @@ -0,0 +1,11 @@ +# $FreeBSD$ + +.PATH: ${.CURDIR}/../../dev/ncr + +KMOD= ncr +SRCS= ncr.c +SRCS+= device_if.h bus_if.h pci_if.h opt_ncr.h opt_cam.h + +.include <bsd.kmod.mk> + +CFLAGS+=-Wno-error=unused-const-variable
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201409230537.s8N5bI0o060375>