Date: Thu, 23 Aug 2001 07:15:22 -0700 From: "Kevin Oberman" <oberman@es.net> To: Michael Collette <metrol@earthlink.net> Cc: FreeBSD <freebsd-mobile@FreeBSD.ORG>, FreeBSD <freebsd-stable@FreeBSD.ORG> Subject: Re: IRQ Problems with Stable Message-ID: <200108231415.f7NEFMR21307@ptavv.es.net> In-Reply-To: Your message of "Thu, 23 Aug 2001 04:54:01 PDT." <20010823115403.4812F37B40D@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> From: Michael Collette <metrol@earthlink.net> > Date: Thu, 23 Aug 2001 04:54:01 -0700 > Sender: owner-freebsd-mobile@FreeBSD.ORG > > Running a Compaq Armada with a Linksys PCMCIA card installed. Under > 4.3-RELEASE I managed to get this working nicely by tweaking /etc/pccard.conf > to set the IRQ to either 9 or 10. Those two being the only things I have > avaiable. > > Addtionally, I added the following flag in rc.conf... > pccard_flags="-i 9" Overkill, but not a problem. > I even tried tweaking the /etc/defaults/pccard.conf file out of desperation > with "irq 9 10". Overkill and a bad idea. The /etc/defaults files should never be edited. > With all that being said, whenever I insert my Linksys card in, it > gets assigned IRQ 11, which is my PS/2 port. Prior to my buildworld > to -STABLE my pccard.conf file was properly assigning the IRQ. > > Is this a bug in STABLE? Some config tweak I still need to make? It's almost certainly STABLE problems. The archives of stable and mobile are full of the tales of Warner's tribulations in trying to get everything working with the new PCI code. Rest assured that you are not alone. If you cvsup back to about the first of August, you should be fine. (Actually, I think it's about the 11th, but I know that my Aug 02 system is before the PCI stuff was MFCed.) Warner has been putting in yoeman's service trying to get every thing working but, while it's getting closer, some systems still are not working right. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200108231415.f7NEFMR21307>