Date: Sat, 29 Dec 2012 13:49:25 -0700 From: Warner Losh <imp@bsdimp.com> To: Thomas Skibo <ThomasSkibo@sbcglobal.net> Cc: freebsd-arm@freebsd.org Subject: Re: FreeBSD on Zedboard (Xilinx Zynq-7000) Message-ID: <6285A410-0470-4A75-9067-7C524831A8DA@bsdimp.com> In-Reply-To: <50DF555B.9060601@sbcglobal.net> References: <50DF4BD9.8080601@sbcglobal.net> <50DF555B.9060601@sbcglobal.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Cool! But don't be a tease! Share the code :) Bringing up new platforms is getting easier and easier now that we've = put all the weight behind FDT, eh? Warner On Dec 29, 2012, at 1:40 PM, Thomas Skibo wrote: >=20 > Hello. >=20 > I have been tinkering with this for several weeks: I booted FreeBSD > on a Zedboard (a low-cost evaluation board for the Xilinx Zynq-7000 = SoC). >=20 > It was just a matter of coming up with a device tree file, = implementing > a UART driver, attaching the generic sdhci driver to the Zynq's SD > hardware, and adding a new CPU id. I don't have an ethernet driver = yet > but I've started on it. >=20 > I created an sdhci_fdt driver based on sdhci_pci.c. It should be > useful for other platforms. I won't be surprised if somebody points > out there is one already. >=20 > One thing that stumped me for a while is that the interrupt controller > driver, gic.c, does not initialize the priority mask register > (GICC_PMR). The boot-loader left it at zero which masked all > interrupts. For now, I plug 0xff into it in my initarm_late_init() > function in zynq7_machdep.c. >=20 > I'll provide my source soon. I want to do a few clean-ups of course > and I'll take any feed-back on my naming conventions and how I = organized the files. >=20 > Thanks, >=20 > --=20 > -------- > Thomas Skibo > ThomasSkibo@sbcglobal.net >=20 >=20 >=20 >=20 >=20 >=20 >=20 >=20 >=20 > <boot2.txt>_______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6285A410-0470-4A75-9067-7C524831A8DA>