Date: Tue, 20 Aug 2013 12:33:35 +0000 (UTC) From: Ian Lepore <ian@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r254559 - in head/sys: arm/conf arm/ti arm/ti/am335x boot/fdt/dts dev/mmc Message-ID: <201308201233.r7KCXZ3p002825@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: ian Date: Tue Aug 20 12:33:35 2013 New Revision: 254559 URL: http://svnweb.freebsd.org/changeset/base/254559 Log: Make the standard sdhci(4) driver work for the TI OMAP family SoCs. The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a couple quirks, which are now supported by sdhci(4) as of r254507. This should work for all TI SoCs that use the MMCHS hardware, but it has only been tested on AM335x right now, so this enables it on those platforms but leaves the existing ti_mmchs driver in place for other OMAP variants until they can be tested. This initial incarnation lacks DMA support (coming soon). Even without it this improves performance pretty noticibly over the ti_mmchs driver, primarily because it now does multiblock IO. Added: head/sys/arm/ti/ti_sdhci.c (contents, props changed) Modified: head/sys/arm/conf/BEAGLEBONE head/sys/arm/ti/am335x/files.am335x head/sys/boot/fdt/dts/am335x.dtsi head/sys/dev/mmc/mmc.c Modified: head/sys/arm/conf/BEAGLEBONE ============================================================================== --- head/sys/arm/conf/BEAGLEBONE Tue Aug 20 11:06:56 2013 (r254558) +++ head/sys/arm/conf/BEAGLEBONE Tue Aug 20 12:33:35 2013 (r254559) @@ -80,6 +80,7 @@ options NFSLOCKD # MMC/SD/SDIO card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards +device sdhci # mmc/sd host controller # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:mmcsd0s2\" Modified: head/sys/arm/ti/am335x/files.am335x ============================================================================== --- head/sys/arm/ti/am335x/files.am335x Tue Aug 20 11:06:56 2013 (r254558) +++ head/sys/arm/ti/am335x/files.am335x Tue Aug 20 12:33:35 2013 (r254559) @@ -9,5 +9,6 @@ arm/ti/am335x/am335x_lcd_syscons.c optio arm/ti/am335x/am335x_pwm.c standard arm/ti/am335x/am335x_usbss.c optional musb fdt arm/ti/ti_edma3.c standard -arm/ti/ti_mmchs.c optional mmc +arm/ti/ti_sdhci.c optional sdhci +#arm/ti/ti_mmchs.c optional mmc arm/ti/cpsw/if_cpsw.c optional cpsw Added: head/sys/arm/ti/ti_sdhci.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/arm/ti/ti_sdhci.c Tue Aug 20 12:33:35 2013 (r254559) @@ -0,0 +1,565 @@ +/*- + * Copyright (c) 2013 Ian Lepore <ian@freebsd.org> + * Copyright (c) 2011 Ben Gray <ben.r.gray@gmail.com>. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + */ +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/bus.h> +#include <sys/gpio.h> +#include <sys/kernel.h> +#include <sys/malloc.h> +#include <sys/module.h> +#include <sys/resource.h> +#include <sys/rman.h> +#include <sys/taskqueue.h> + +#include <machine/bus.h> +#include <machine/resource.h> +#include <machine/intr.h> + +#include <dev/fdt/fdt_common.h> +#include <dev/ofw/ofw_bus.h> +#include <dev/ofw/ofw_bus_subr.h> + +#include <dev/mmc/bridge.h> +#include <dev/mmc/mmcreg.h> +#include <dev/mmc/mmcbrvar.h> + +#include <dev/sdhci/sdhci.h> +#include "sdhci_if.h" + +#include <arm/ti/ti_cpuid.h> +#include <arm/ti/ti_prcm.h> +#include "gpio_if.h" + +struct ti_sdhci_softc { + device_t dev; + device_t gpio_dev; + struct resource * mem_res; + struct resource * irq_res; + void * intr_cookie; + struct sdhci_slot slot; + uint32_t mmchs_device_id; + uint32_t mmchs_reg_off; + uint32_t sdhci_reg_off; + uint32_t baseclk_hz; + uint32_t wp_gpio_pin; + uint32_t cmd_and_mode; + uint32_t sdhci_clkdiv; +}; + +/* + * The MMCHS hardware has a few control and status registers at the beginning of + * the device's memory map, followed by the standard sdhci register block. + * Different SoCs have the register blocks at different offsets from the + * beginning of the device. Define some constants to map out the registers we + * access, and the various per-SoC offsets. The SDHCI_REG_OFFSET is how far + * beyond the MMCHS block the SDHCI block is found; it's the same on all SoCs. + */ +#define OMAP3_MMCHS_REG_OFFSET 0x000 +#define OMAP4_MMCHS_REG_OFFSET 0x100 +#define AM335X_MMCHS_REG_OFFSET 0x100 +#define SDHCI_REG_OFFSET 0x100 + +#define MMCHS_SYSCONFIG 0x010 +#define MMCHS_SYSCONFIG_RESET (1 << 1) +#define MMCHS_SYSSTATUS 0x014 +#define MMCHS_CON 0x02C +#define MMCHS_CON_DW8 (1 << 5) +#define MMCHS_CON_DVAL_8_4MS (3 << 9) + +static inline uint32_t +ti_mmchs_read_4(struct ti_sdhci_softc *sc, bus_size_t off) +{ + + return (bus_read_4(sc->mem_res, off + sc->mmchs_reg_off)); +} + +static inline void +ti_mmchs_write_4(struct ti_sdhci_softc *sc, bus_size_t off, uint32_t val) +{ + + bus_write_4(sc->mem_res, off + sc->mmchs_reg_off, val); +} + +static inline uint32_t +RD4(struct ti_sdhci_softc *sc, bus_size_t off) +{ + + return (bus_read_4(sc->mem_res, off + sc->sdhci_reg_off)); +} + +static inline void +WR4(struct ti_sdhci_softc *sc, bus_size_t off, uint32_t val) +{ + + bus_write_4(sc->mem_res, off + sc->sdhci_reg_off, val); +} + +static uint8_t +ti_sdhci_read_1(device_t dev, struct sdhci_slot *slot, bus_size_t off) +{ + struct ti_sdhci_softc *sc = device_get_softc(dev); + + return ((RD4(sc, off & ~3) >> (off & 3) * 8) & 0xff); +} + +static uint16_t +ti_sdhci_read_2(device_t dev, struct sdhci_slot *slot, bus_size_t off) +{ + struct ti_sdhci_softc *sc = device_get_softc(dev); + uint32_t clkdiv, val32; + + /* + * The MMCHS hardware has a non-standard interpretation of the sdclock + * divisor bits. It uses the same bit positions as SDHCI 3.0 (15..6) + * but doesn't split them into low:high fields. Instead they're a + * single number in the range 0..1023 and the number is exactly the + * clock divisor (with 0 and 1 both meaning divide by 1). The SDHCI + * driver code expects a v2.0 divisor (value N is power of two in the + * range 0..128 and clock is divided by 2N). The shifting and masking + * here extracts the MMCHS representation from the hardware word, cleans + * those bits out, applies the 2N adjustment, and plugs that into the + * bit positions for the 2.0 divisor in the returned register value. The + * ti_sdhci_write_2() routine performs the opposite transformation when + * the SDHCI driver writes to the register. + */ + if (off == SDHCI_CLOCK_CONTROL) { + val32 = RD4(sc, SDHCI_CLOCK_CONTROL); + clkdiv = (val32 >> SDHCI_DIVIDER_HI_SHIFT) & 0xff; + val32 &= ~(0xff << SDHCI_DIVIDER_HI_SHIFT); + val32 |= (clkdiv / 2) << SDHCI_DIVIDER_SHIFT; + return (val32 & 0xffff); + } + + /* + * Standard 32-bit handling of command and transfer mode. + */ + if (off == SDHCI_TRANSFER_MODE) { + return (sc->cmd_and_mode >> 16); + } else if (off == SDHCI_COMMAND_FLAGS) { + return (sc->cmd_and_mode & 0x0000ffff); + } + + return ((RD4(sc, off & ~3) >> (off & 3) * 8) & 0xffff); +} + +static uint32_t +ti_sdhci_read_4(device_t dev, struct sdhci_slot *slot, bus_size_t off) +{ + struct ti_sdhci_softc *sc = device_get_softc(dev); + + return (RD4(sc, off)); +} + +static void +ti_sdhci_read_multi_4(device_t dev, struct sdhci_slot *slot, bus_size_t off, + uint32_t *data, bus_size_t count) +{ + struct ti_sdhci_softc *sc = device_get_softc(dev); + + bus_read_multi_4(sc->mem_res, off + sc->sdhci_reg_off, data, count); +} + +static void +ti_sdhci_write_1(device_t dev, struct sdhci_slot *slot, bus_size_t off, + uint8_t val) +{ + struct ti_sdhci_softc *sc = device_get_softc(dev); + uint32_t val32; + + val32 = RD4(sc, off & ~3); + val32 &= ~(0xff << (off & 3) * 8); + val32 |= (val << (off & 3) * 8); + + WR4(sc, off & ~3, val32); +} + +static void +ti_sdhci_write_2(device_t dev, struct sdhci_slot *slot, bus_size_t off, + uint16_t val) +{ + struct ti_sdhci_softc *sc = device_get_softc(dev); + uint32_t clkdiv, val32; + + /* + * Translate between the hardware and SDHCI 2.0 representations of the + * clock divisor. See the comments in ti_sdhci_read_2() for details. + */ + if (off == SDHCI_CLOCK_CONTROL) { + clkdiv = (val >> SDHCI_DIVIDER_SHIFT) & SDHCI_DIVIDER_MASK; + val32 = RD4(sc, SDHCI_CLOCK_CONTROL); + val32 &= 0xffff0000; + val32 |= val & ~(SDHCI_DIVIDER_MASK << SDHCI_DIVIDER_SHIFT); + val32 |= (clkdiv * 2) << SDHCI_DIVIDER_HI_SHIFT; + WR4(sc, SDHCI_CLOCK_CONTROL, val32); + return; + } + + /* + * Standard 32-bit handling of command and transfer mode. + */ + if (off == SDHCI_TRANSFER_MODE) { + sc->cmd_and_mode = (sc->cmd_and_mode & 0xffff0000) | + ((uint32_t)val & 0x0000ffff); + return; + } else if (off == SDHCI_COMMAND_FLAGS) { + sc->cmd_and_mode = (sc->cmd_and_mode & 0x0000ffff) | + ((uint32_t)val << 16); + WR4(sc, SDHCI_TRANSFER_MODE, sc->cmd_and_mode); + return; + } + + val32 = RD4(sc, off & ~3); + val32 &= ~(0xffff << (off & 3) * 8); + val32 |= ((val & 0xffff) << (off & 3) * 8); + WR4(sc, off & ~3, val32); +} + +static void +ti_sdhci_write_4(device_t dev, struct sdhci_slot *slot, bus_size_t off, + uint32_t val) +{ + struct ti_sdhci_softc *sc = device_get_softc(dev); + + WR4(sc, off, val); +} + +static void +ti_sdhci_write_multi_4(device_t dev, struct sdhci_slot *slot, bus_size_t off, + uint32_t *data, bus_size_t count) +{ + struct ti_sdhci_softc *sc = device_get_softc(dev); + + bus_write_multi_4(sc->mem_res, off + sc->sdhci_reg_off, data, count); +} + +static void +ti_sdhci_intr(void *arg) +{ + struct ti_sdhci_softc *sc = arg; + + sdhci_generic_intr(&sc->slot); +} + +static int +ti_sdhci_update_ios(device_t brdev, device_t reqdev) +{ + struct ti_sdhci_softc *sc = device_get_softc(brdev); + struct sdhci_slot *slot; + struct mmc_ios *ios; + uint32_t val32; + + slot = device_get_ivars(reqdev); + ios = &slot->host.ios; + + /* + * There is an 8-bit-bus bit in the MMCHS control register which, when + * set, overrides the 1 vs 4 bit setting in the standard SDHCI + * registers. Set that bit first according to whether an 8-bit bus is + * requested, then let the standard driver handle everything else. + */ + val32 = ti_mmchs_read_4(sc, MMCHS_CON); + if (ios->bus_width == bus_width_8) + ti_mmchs_write_4(sc, MMCHS_CON, val32 | MMCHS_CON_DW8); + else + ti_mmchs_write_4(sc, MMCHS_CON, val32 & ~MMCHS_CON_DW8); + + return (sdhci_generic_update_ios(brdev, reqdev)); +} + +static int +ti_sdhci_get_ro(device_t brdev, device_t reqdev) +{ + struct ti_sdhci_softc *sc = device_get_softc(brdev); + unsigned int readonly = 0; + + /* If a gpio pin is configured, read it. */ + if (sc->gpio_dev != NULL) { + GPIO_PIN_GET(sc->gpio_dev, sc->wp_gpio_pin, &readonly); + } + + return (readonly); +} + +static int +ti_sdhci_detach(device_t dev) +{ + + return (EBUSY); +} + +static void +ti_sdhci_hw_init(device_t dev) +{ + struct ti_sdhci_softc *sc = device_get_softc(dev); + clk_ident_t clk; + unsigned long timeout; + + /* Enable the controller and interface/functional clocks */ + clk = MMC0_CLK + sc->mmchs_device_id; + if (ti_prcm_clk_enable(clk) != 0) { + device_printf(dev, "Error: failed to enable MMC clock\n"); + return; + } + + /* Get the frequency of the source clock */ + if (ti_prcm_clk_get_source_freq(clk, &sc->baseclk_hz) != 0) { + device_printf(dev, "Error: failed to get source clock freq\n"); + return; + } + + /* Issue a softreset to the controller */ + ti_mmchs_write_4(sc, MMCHS_SYSCONFIG, MMCHS_SYSCONFIG_RESET); + timeout = 1000; + while ((ti_mmchs_read_4(sc, MMCHS_SYSSTATUS) & MMCHS_SYSCONFIG_RESET)) { + if (--timeout == 0) { + device_printf(dev, "Error: Controller reset operation timed out\n"); + break; + } + DELAY(100); + } + + /* Reset both the command and data state machines */ + ti_sdhci_write_1(dev, NULL, SDHCI_SOFTWARE_RESET, SDHCI_RESET_ALL); + timeout = 1000; + while ((ti_sdhci_read_1(dev, NULL, SDHCI_SOFTWARE_RESET) & SDHCI_RESET_ALL)) { + if (--timeout == 0) { + device_printf(dev, "Error: Software reset operation timed out\n"); + break; + } + DELAY(100); + } + + /* Set initial host configuration (1-bit, std speed, pwr off). */ + ti_sdhci_write_1(dev, NULL, SDHCI_HOST_CONTROL, 0); + ti_sdhci_write_1(dev, NULL, SDHCI_POWER_CONTROL, 0); + + /* Set the initial controller configuration. */ + ti_mmchs_write_4(sc, MMCHS_CON, MMCHS_CON_DVAL_8_4MS); +} + +static int +ti_sdhci_attach(device_t dev) +{ + struct ti_sdhci_softc *sc = device_get_softc(dev); + int rid, err; + pcell_t prop; + phandle_t node; + + sc->dev = dev; + + /* + * Get the MMCHS device id from FDT. If it's not there use the newbus + * unit number (which will work as long as the devices are in order and + * none are skipped in the fdt). + */ + node = ofw_bus_get_node(dev); + if ((OF_getprop(node, "mmchs-device-id", &prop, sizeof(prop))) <= 0) { + sc->mmchs_device_id = device_get_unit(dev); + device_printf(dev, "missing mmchs-device-id attribute in FDT, " + "using unit number (%d)", sc->mmchs_device_id); + } else + sc->mmchs_device_id = fdt32_to_cpu(prop); + + /* See if we've got a GPIO-based write detect pin. */ + if ((OF_getprop(node, "mmchs-wp-gpio-pin", &prop, sizeof(prop))) <= 0) + sc->wp_gpio_pin = 0xffffffff; + else + sc->wp_gpio_pin = fdt32_to_cpu(prop); + + if (sc->wp_gpio_pin != 0xffffffff) { + sc->gpio_dev = devclass_get_device(devclass_find("gpio"), 0); + if (sc->gpio_dev == NULL) + device_printf(dev, "Error: No GPIO device, " + "Write Protect pin will not function\n"); + else + GPIO_PIN_SETFLAGS(sc->gpio_dev, sc->wp_gpio_pin, + GPIO_PIN_INPUT); + } + + /* + * Set the offset from the device's memory start to the MMCHS registers. + * + * XXX A better way to handle this would be to have separate memory + * resources for the sdhci registers and the mmchs registers. That + * requires changing everyone's DTS files. + */ + if (ti_chip() == CHIP_OMAP_3) + sc->mmchs_reg_off = OMAP3_MMCHS_REG_OFFSET; + else if (ti_chip() == CHIP_OMAP_4) + sc->mmchs_reg_off = OMAP4_MMCHS_REG_OFFSET; + else if (ti_chip() == CHIP_AM335X) + sc->mmchs_reg_off = AM335X_MMCHS_REG_OFFSET; + else + panic("Unknown OMAP device\n"); + + /* + * The standard SDHCI registers are at a fixed offset (the same on all + * SoCs) beyond the MMCHS registers. + */ + sc->sdhci_reg_off = sc->mmchs_reg_off + SDHCI_REG_OFFSET; + + /* Resource setup. */ + rid = 0; + sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, + RF_ACTIVE); + if (!sc->mem_res) { + device_printf(dev, "cannot allocate memory window\n"); + err = ENXIO; + goto fail; + } + + rid = 0; + sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, + RF_ACTIVE); + if (!sc->irq_res) { + device_printf(dev, "cannot allocate interrupt\n"); + err = ENXIO; + goto fail; + } + + if (bus_setup_intr(dev, sc->irq_res, INTR_TYPE_BIO | INTR_MPSAFE, + NULL, ti_sdhci_intr, sc, &sc->intr_cookie)) { + device_printf(dev, "cannot setup interrupt handler\n"); + err = ENXIO; + goto fail; + } + + /* Initialise the MMCHS hardware. */ + ti_sdhci_hw_init(dev); + + /* + * The capabilities register can only express base clock frequencies in + * the range of 0-63MHz for a v2.0 controller. Since our clock runs + * faster than that, the hardware sets the frequency to zero in the + * register. When the register contains zero, the sdhci driver expects + * slot.max_clk to already have the right value in it. + */ + sc->slot.max_clk = sc->baseclk_hz; + + /* + * The MMCHS timeout counter is based on the output sdclock. Tell the + * sdhci driver to recalculate the timeout clock whenever the output + * sdclock frequency changes. + */ + sc->slot.quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK; + + /* + * The MMCHS hardware shifts the 136-bit response data (in violation of + * the spec), so tell the sdhci driver not to do the same in software. + */ + sc->slot.quirks |= SDHCI_QUIRK_DONT_SHIFT_RESPONSE; + + /* + * DMA is not really broken, I just haven't implemented it yet. + */ + sc->slot.quirks |= SDHCI_QUIRK_BROKEN_DMA; + + /* Set up the hardware and go. */ + sdhci_init_slot(dev, &sc->slot, 0); + + /* + * The SDHCI controller doesn't realize it, but we support 8-bit even + * though we're not a v3.0 controller. Advertise the ability. + */ + sc->slot.host.caps |= MMC_CAP_8_BIT_DATA; + + bus_generic_probe(dev); + bus_generic_attach(dev); + + sdhci_start_slot(&sc->slot); + + return (0); + +fail: + if (sc->intr_cookie) + bus_teardown_intr(dev, sc->irq_res, sc->intr_cookie); + if (sc->irq_res) + bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq_res); + if (sc->mem_res) + bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->mem_res); + + return (err); +} + +static int +ti_sdhci_probe(device_t dev) +{ + + if (!ofw_bus_is_compatible(dev, "ti,mmchs")) { + return (ENXIO); + } + + device_set_desc(dev, "TI MMCHS (SDHCI 2.0)"); + + return (BUS_PROBE_DEFAULT); +} + +static device_method_t ti_sdhci_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, ti_sdhci_probe), + DEVMETHOD(device_attach, ti_sdhci_attach), + DEVMETHOD(device_detach, ti_sdhci_detach), + + /* Bus interface */ + DEVMETHOD(bus_read_ivar, sdhci_generic_read_ivar), + DEVMETHOD(bus_write_ivar, sdhci_generic_write_ivar), + DEVMETHOD(bus_print_child, bus_generic_print_child), + + /* MMC bridge interface */ + DEVMETHOD(mmcbr_update_ios, ti_sdhci_update_ios), + DEVMETHOD(mmcbr_request, sdhci_generic_request), + DEVMETHOD(mmcbr_get_ro, ti_sdhci_get_ro), + DEVMETHOD(mmcbr_acquire_host, sdhci_generic_acquire_host), + DEVMETHOD(mmcbr_release_host, sdhci_generic_release_host), + + /* SDHCI registers accessors */ + DEVMETHOD(sdhci_read_1, ti_sdhci_read_1), + DEVMETHOD(sdhci_read_2, ti_sdhci_read_2), + DEVMETHOD(sdhci_read_4, ti_sdhci_read_4), + DEVMETHOD(sdhci_read_multi_4, ti_sdhci_read_multi_4), + DEVMETHOD(sdhci_write_1, ti_sdhci_write_1), + DEVMETHOD(sdhci_write_2, ti_sdhci_write_2), + DEVMETHOD(sdhci_write_4, ti_sdhci_write_4), + DEVMETHOD(sdhci_write_multi_4, ti_sdhci_write_multi_4), + + DEVMETHOD_END +}; + +static devclass_t ti_sdhci_devclass; + +static driver_t ti_sdhci_driver = { + "sdhci_ti", + ti_sdhci_methods, + sizeof(struct ti_sdhci_softc), +}; + +DRIVER_MODULE(sdhci_ti, simplebus, ti_sdhci_driver, ti_sdhci_devclass, 0, 0); +MODULE_DEPEND(sdhci_ti, sdhci, 1, 1, 1); Modified: head/sys/boot/fdt/dts/am335x.dtsi ============================================================================== --- head/sys/boot/fdt/dts/am335x.dtsi Tue Aug 20 11:06:56 2013 (r254558) +++ head/sys/boot/fdt/dts/am335x.dtsi Tue Aug 20 12:33:35 2013 (r254559) @@ -112,6 +112,7 @@ interrupts = <64>; interrupt-parent = <&AINTC>; mmchs-device-id = <0>; + mmchs-wp-gpio-pin = <0xffffffff>; }; mmchs1@481D8000 { @@ -120,6 +121,7 @@ interrupts = <28>; interrupt-parent = <&AINTC>; mmchs-device-id = <1>; + mmchs-wp-gpio-pin = <0xffffffff>; status = "disabled"; }; Modified: head/sys/dev/mmc/mmc.c ============================================================================== --- head/sys/dev/mmc/mmc.c Tue Aug 20 11:06:56 2013 (r254558) +++ head/sys/dev/mmc/mmc.c Tue Aug 20 12:33:35 2013 (r254559) @@ -1761,3 +1761,4 @@ DRIVER_MODULE(mmc, at91_mci, mmc_driver, DRIVER_MODULE(mmc, sdhci_pci, mmc_driver, mmc_devclass, NULL, NULL); DRIVER_MODULE(mmc, sdhci_bcm, mmc_driver, mmc_devclass, NULL, NULL); DRIVER_MODULE(mmc, sdhci_fdt, mmc_driver, mmc_devclass, NULL, NULL); +DRIVER_MODULE(mmc, sdhci_ti, mmc_driver, mmc_devclass, NULL, NULL);
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201308201233.r7KCXZ3p002825>