Date: Wed, 22 Mar 2017 11:55:11 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Luciano Mannucci <luciano@vespaperitivo.it> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Atheros 9285 issue Message-ID: <CAJ-Vmokya6D_MV_dj1Ad_yzcGs=d%2Bm59Ad6=FQ1yxTNuwmvkJg@mail.gmail.com> In-Reply-To: <3vp5hg28dsz1cXL0@baobab.bilink.it> References: <3vp5hg28dsz1cXL0@baobab.bilink.it>
next in thread | previous in thread | raw e-mail | index | archive | help
hiya, That is HAL_ESELFTEST. That means that the NIC failed to self-test. CAn you compile up tools/tools/ath/athregs and run athregs -i wlan0 when this happens? Thanks, -adrian On 22 March 2017 at 03:36, Luciano Mannucci <luciano@vespaperitivo.it> wrote: > > Hello to everybody, > > I've recently installed Freebsd 10.3 RELEASE (11.o doesn't boot) on my > laptop that was running OpenSuSE Leap 42.2. Everything seems quite > good but the WiFi. After some 24/36 hours it hangs, and I found no way > to reset it without rebooting. I know I can live with that, but is it > normal? > > dmesg reports a lot of: > ath0: ath_reset: unable to reset hardware; hal status 14 > ath0: ath_reset: unable to reset hardware; hal status 14 > ath0: ath_chan_set: unable to reset channel 1 (2412 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 6 (2437 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 11 (2462 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 7 (2442 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 13 (2472 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 2 (2417 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 3 (2422 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 4 (2427 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 5 (2432 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 8 (2447 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 9 (2452 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 10 (2457 MHz, flags 0x480), hal status 14 > ath0: ath_chan_set: unable to reset channel 12 (2467 MHz, flags 0x480), hal status 14 > ath0: device timeout > ath0: ath_reset: unable to reset hardware; hal status 14 > ath0: ath_reset: unable to reset hardware; hal status 14 > > and ifconfig says "no carrier"... > > Cheers to all, > > Luciano. > -- > /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) > \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 > X AGAINST HTML MAIL / E-MAIL: posthamster@sublink.sublink.ORG > / \ AND POSTINGS / WWW: http://www.lesassaie.IT/ > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmokya6D_MV_dj1Ad_yzcGs=d%2Bm59Ad6=FQ1yxTNuwmvkJg>